Opening a named pipe can block until both ends are open, and we cannot
control when the other end will be open. Ideally, we would always
open files in a thread so that Packager can be used with piped inputs
from naive applications without a potential deadlock.
This change will defer opening WebVTT files until the parser Run()
method is called from a thread. This way, WebVTT files being sent in
from a pipe will never be able to block the main thread.
Previously, files were opened on the main thread before calling the
parser constructor, passing the open file to the constructor as an
argument. I also tried doing it in the parser's InitializeInternal()
method, but that is also called from the main thread.
Change-Id: I54cc68ed9d48a8dc697829119be84d4065b1ae1c
Under command line flag --mvex_before_trak.
This is needed to workaround Android MediaExtractor bug which
requires |mvex| to appear before |trak|.
Closes#711.
Change-Id: Id41d71af5c0016f59023dda6408bbf502e12ac55
Added --crypt_byte_block, --skip_byte_block to allow users to specify
protection pattern other than 1:9 for pattern based encryption scheme,
e.g. cbcs and cens.
Closes#710.
b/147307451
Change-Id: I9f64a7639170c737f138572689b28d17286325c7
AV1-ISOBMFF spec is updated recently to use start alignment instead of
end alignment for cbcs:
for the protected scheme cbcs:
- BytesOfProtectedData SHALL start on the first byte and end on the
last byte of the decode_tile structure (including any trailing bits).
- A subsample SHALL be created for each tile, even if its size is less
than 16 bytes.
- ...
cenc protection scheme is not affected.
Closes#698.
Change-Id: Ic83a478fb2602d830c30daf3206a1c2d2c238a08
Remove custom constructors, which is no longer needed with C++11. Use
C++ struct zero initialization instead.
Fixes#686.
Change-Id: I512da9f23a250e8b9ebf8bb8e0a39ad0f822d0d3
Added Dolby Vision backward compatible signalling, i.e. for Dolby Vision
profile 8, both base codec without Dolby Vision and HDR codec with Dolby
Vision are signalled.
This is achieved by using a new MuxerListener implementation
MultiCodecMuxerListener, which wraps multiple child MuxerListeners and
is able to delegate to the child MuxerListeners based on the codecs in
the stream.
Closes#341.
Change-Id: I1967bb1ed503087cdd011c364e5fb5647d516ca4
Call CRYPTO_library_init to properly initialize crypto engine, which
enables AES-NI (Hardware AES) if it is supported by CPU.
Also added a performance benchmark test.
Closes#198.
Change-Id: I962a2da588d2f4f6cbe00c83ecc9a832db0e6042
For MP4 files, mp4 parser tries to open and read the same file again
to handle trailing MOOV box.
Open FIFO again may result in packager hang.
Update the code to only attempt to load MOOV for local regular files,
as FIFO and remote files are unseekable anyway.
Fixes#664.
Change-Id: Ib286d2876d202cd5a248ffe70b13589b3cc74bc9
Calculate FRAME-RATE from sample duration as in the DASH solution.
Right now calculated frame-rate may not be accurate in some scenarios,
so we avoid setting the attribute in HLS unless it is more than 30
fps. We will set it unconditionally once it is fixed.
Fixes#634.
Change-Id: I87b6e9a047d959ae88dd4dcb2b4786527ba5c9fc
- Parse and extract transfer_characteristics from H264/H265 VUI
parameters.
- Set VIDEO-RANGE attribute in HLS according to HLS specification:
https://tools.ietf.org/html/draft-pantos-hls-rfc8216bis-02#section-4.4.4.2
- Also added an end to end test.
Fixes#632.
Change-Id: Iadf557d967b42ade321fb0b152e8e7b64fe9ff3e
- Add relevant FOURCCs for Dolby Vision.
- Parse DOVIDecoderConfigurationRecord (dvcC, dvvC) to generate
Dolby Vision codec string.
- Propagate Dolby Vision configs (dvcC, dvvC, hvcE) from Demuxer
to Muxer.
- Add a Dolby Vision end to end test.
Support for backward compatibility signaling in DASH and HLS will be
added in a later CL.
Issue #341
Change-Id: If1385df5f48e04b59cb7661130bea48e26b453bf
Latest version of FFmpeg encodes non standard channel layout, e.g. 5.1(side), in AAC using PCE.
This is now supported with the below changes:
- Allow channel_configuration in ADTS header to be 0, as the cctual channel layout is specified
in PCE.
- Add GetFrameSizeWithoutParsing to determine the frame size before actually parsing the frame.
- Skip and resume later if not the whole frame is available.
- Also ensure that the next frame starts with a proper sync word.
Fixes#598.
- Parses parameter set NAL units in the samples.
- Calculate pixel width and height from track width and height.
Fixes#621, #627.
Change-Id: Ic1e120dccbd220b01168f7bf4effeaa43f95b055
Add dash_accessibilities stream descriptor, which is a semi-colon
separated list of accessibility_scheme_id_uri=value. It is optional.
Add dash_roles stream descriptor, which is a semi-colon separated
list of strings. It is optional.
Closes#565.
Change-Id: Idb1c20bb410fdd016db07e11fe507c102a3dd8ea
This is needed for Dolby Vision as Dolby Vision uses NAL unit type 62
to carry private information.
Issue #341.
Change-Id: Ib3f06d8f36ef3d89c33162dd74c012a0c3a805e5
- Define BaseDescriptor and generic read / write operations.
- Define descriptors: ESDescriptor, DecoderConfigDescriptor,
DecoderSpecificInfoDescriptor, SLConfigDescriptor.
DecoderSpecificInfoDescriptor and all other descriptors can now
handle arbitrary length size, not limiting to 64 byte for
DecoderSpecificInfoDescriptor, which was placed to limit
ESDescriptor length size to one byte.
- Now DecoderConfigDescriptor is able to handle reading and writing
of all fields including buffer_size_db, which was not handled
earlier.
Fixes#536.
Change-Id: Ia8a775f8bf6e90e3343a85f0e643bc44cd017c7a
Add crypto_period_seconds to Widevine key request
When using key rotation with Widevine DRM, a key server has to know
the duration of crypto period to relate generated keys to the media
playback time. This helps the server to provide relevant keys to
a client during license request.
Closes#544.
VLC seems to generate access units with extra AUDs. In #526, the below
sequence is seen:
AUD | SPS | PPS | SPS | PPS | AUD | SEI | SEI | SEI | IDR_SLICE
Previously we exit early when seeing AUD, which results in delayed
processing of the access unit.
The behavior is changed to continue processing the following NAL units
to workaround the content issue.
Closes#526.
Change-Id: I80f571c0711c6db1337eb393fce36fae5432b6c5
Add hls_characteristics stream descriptor, which is a colon or semi-colon
separated list of strings. It is optional.
Fixes#430.
Change-Id: Ifcf79316e68768ff065891933de565cd0ff32ec4
kFrameSizeCodeTable rows are ordered by 32kHz, 44.1kHz and 48kHz,
which is the reverse of fscod (48kHz, 44.1kHz and 32kHz).
Also updated unittests.
Fixes#487.
Change-Id: Icb0afb8bb895afde0028eee05b403bc85bf7b538
Dump the first 512 bytes of the buffer if container is unknown. This
can help us find out what the actual container is; and fix the
container detection bug if there is.
Closes#505.
Change-Id: I4a8fe5954d0419ef2ccbb9067ec2e9ffe1da417e
Created SubsampleGenerator to generate subsamples.
This is part of the EncryptionHandler clean up to make it more modular
and testable.
Change-Id: I6f4076b057027c72335beb3cbf1965341eb18031
Created EncryptorFactory to set up the encryptors.
This is part of the EncryptionHandler clean up to make it more modular
and testable.
Change-Id: I839bcd8a84fa873396360d67afb540fef1345673
Only Marlin Adaptive Streaming Specification – Simple Profile is
supported.
Two additional updates:
- Remove FairPlay ContentProtection element from DASH mpd as FairPlay
does not define a signaling in DASH.
- Updated end to end test to include all DRMs we support.
Closes#381.
Change-Id: Id12269b471ea34983b782cbd92f687332292ef59
Implemented according to bitstream spec at
https://aomediacodec.github.io/av1-spec/.
It will be used to do AV1 subsample encryption later.
Issue #453.
Change-Id: I84d8a2a780d95f2c9f430ee598838b97474cc0af
This was introduced earlier to indicate FairPlay protection system. But
in fact, it is sufficient to just use the system id for the indication.
- Also updated various parts of the pipeline to support empty PSSH.
- Added an additional FairPlay end to end test using fMP4.
Change-Id: Ica48b7b5235e9a2b5a7f722bcd0fc1ef2073ac13
Note that TTML in ISO-BMFF is not supported yet.
Also updated packager_test.py:
- Added a test using TTML passthrough.
- Computed output extension from input extension unless output_format
is specified.
Fixes#478.
Change-Id: Ia917fc4ed3c326782791ed67601fba02ea28b11d
The time for the previous segment was used when generating the segment
name. This resulted in the first segment being overwritten and
mismatching manifest and media files. It led to playback problems.
Issue #472.
Change-Id: Ia8130ce261585e1a2ede83b26de3e32508de087f
The VP9 level is computed when the container is missing a codec config
or if the level is missing from the codec config.
This fixes VP9 in ISO-BMFF files generated by FFmpeg v4.0.2 or earlier
which does not have level set in the codec config.
Fixes#469.
Change-Id: I685bfd48be16ee6b2209da1c3173f7d6bb02b36a
Implemented per AV1 Codec ISO Media File Format Binding at
https://aomediacodec.github.io/av1-isobmff/
And AOM AV1 codec mapping in Matroska/WebM at
https://github.com/Matroska-Org/matroska-specification/blob/av1-mappin/codec/av1.md
Note that AV1 specific boxes are not supported in this CL, i.e.
AV1 Forward Key Frame sample group entry 'av1f', AV1 Multi-Frame
sample group entry 'av1m' etc are not supported. These boxes are optional.
We will add support later if they are useful to the clients / players.
Encryption is not supported yet.
Issue #453.
Change-Id: I630432d0a9bf82d263ffaf40e57f67fc65eee902
We used to skip all the remaining bytes if the size is less than
|crypt_byte_block| blocks.
This interpretation is incorrect. We should only leave the last partial
16-byte block un-encrypted.
Change-Id: I4f09600efa52e2fdf4d0b661dfc418dcb675f9f6
Renamed "FakeMediaHandler" to "CachingMediaHandler" so that it
is easier to differentiate from "FakeInputMediaHandler". It will
be used as the single method to verify media handler output.
This is part of an effort to find a cleaner way to test media handlers.
Change-Id: Ie391fe23ee3389d13b012ae3093744a453106c19
Negative duration is not allowed, so set the duration of that sample to
an arbitrary small value in case it is needed to decode future samples.
Issue #451.
Change-Id: I9250d71d163f769ea2657d56e108b6dbd583de67
Note that STYLE and REGION are not supported in mp4 container due to
spec limitation as 14496-30:2014 does not specify a way to signal
styles/regions inside mp4.
Closes#344.
Change-Id: I05c14df916f7b2c7ca4364ee9407e0eda4dc7a3f
- Also fixed compilations in Alpine Linux and other flavors of Linux.
- Added container versions in docker files to always use a verified
version.
Closes#164.
Change-Id: I949a8709e4d70c49129c9c2e8608dd78193d964c
In some ISO-BMFF files, there is an initial non-zero composition offset,
but there is no EditList present.
This is against ISO-BMFF spec recommentation [1] and we believe in most
cases it is just missing the EditList.
[1] 14496-12:2015 8.6.6.1
It is recommended that such an edit be used to establish a presentation
time of 0 for the first presented sample, when composition offsets are
used.
Issue: #112.
Change-Id: I178d5ec9d8c294c9f70aac4f4dd6254c824e2255
It is possible to see a negative timestamp if the input mp4 file
contains EditList.
Also increase the queue size for EncryptionKey to be able to handle
smaller crypto_period_duration during testing.
Change-Id: I68278bf482d6662e771d9b80f4d5409605065aac
Configurable with --transport_stream_offset_ms.
This is needed to compensate for possible negative timestamps in
inputs, which could happen on ISO-BMFF with EditLists.
Issue #112.
Change-Id: I0fce8766c9df2911b9bb859c1e54052a8ed2abfb
In some ISO-BMFF files, there is an initial non-zero composition offset,
but there is no EditList present.
This is against ISO-BMFF spec recommentation [1] and we believe in most
cases it is just missing the EditList.
[1] 14496-12:2015 8.6.6.1
It is recommended that such an edit be used to establish a presentation
time of 0 for the first presented sample, when composition offsets are
used.
Issue: #112.
Fixes: b/110782437.
Change-Id: I23d33810ce536b09a1e22a2644828d824c1314f5
- EditLists in input files are parsed and applied to sample timestamps.
- An EditList will be inserted in the ISO-BMFF output if
- There is an offset between the initial presentation timestamp (pts)
and decoding timestamp (dts). Chrome, as of M67, still uses dts in
buffered range API [1], which creates various problems when buffered
range by pts does not align with buffered range by dts. There is
another bug in Chrome that applies EditList to pts only [2]. This
means that we can insert an EditList to align pts range and dts range.
- MediaSamples have negative timestamps (e.g. for Audio Priming).
You may notice the below change on some contents:
- Some media duration is reduced by one or two frames. This is because
EditList in the input file was ignored in the previous code, so video
streams start with a zero dts and a non-zero pts; the smaller of dts
and pts was used as the starting timestamp (related to the earlier
workaround for Chrome's dts bug), so the calculated duration was
actually a bit larger than the actual duration. Now with EditList
applied, the initial pts is reduced to zero, so the media duration is
also reduced to reflect the actual and correct media duration.
It may also result in negative timestamps in TS/HLS Packed Audio, which
will be addressed in a follow up CL.
Fixes#112.
Partially address b/110782437.
[1] https://crbug.com/718641, fixed but behind MseBufferByPts.
[2] https://crbug.com/354518. Chrome is planning to enable the fix for
[1] before addressing this bug, so we are safe.
Change-Id: I59317740ad3807ca66fa74b3a18fdf7f32c96aeb
They will result in empty DASH representations, which is not spec
compliant.
For text, if the cue is before the max end time, it will still be
dispatched as the text samples intercepted by the cue can be split into
two at the cue point.
Bug: 111359775.
Change-Id: I55c2025c4e9d64c88e6a685c0cf3024a0cc4a6d8
WebVTT cues without payload may not carry meaningful information, but it
is allowed by WebVTT specification [1]. It could also be useful
sometimes, e.g. to signal the time progression in live case.
Fixes#433.
[1] https://www.w3.org/TR/webvtt1/#types-of-webvtt-cue-payload
Change-Id: I9e31f4a3789cbdafb7667b64f4019834190ecfc0
- Support decryption verification in _CheckTestResults
- Allow diff_files in _CheckTestResults
- Update all functional tests to use _CheckTestResults
Change-Id: I3f9c02f35808eba787becf9b1e5c1ce9238f943e
Before we had an assert that would catch if a sample had an
invalid times, however input may have bad times.
We did have a message if we saw a sample with a duration equal to
zero. This expands that check to check if the time is valid in
general and will ignore any sample that is not valid.
Fixes#425
Change-Id: I9774bfbdbd401f3016d2c345665b9973d1889db7
This flag was designed for two purpose:
- Grouping fragments into subsegments, achieving three level hierarchy:
segment < subsegment < fragment.
- Indicate whether to generate 'sidx' box in media segments (when the
value is set to a negative number).
There are no practical use case for the first purpose. Removing it to
simplify the code and reduce the confusion.
Introduce another flag --generate_sidx_in_media_segments for the second
purpose.
Change-Id: I4be7cd42662fb324c1158b978e05768ee49dd048
It was implemented to workaround Chromium's DTS
https://crbug.com/398130, but the workaround does not really work in
all situations.
Remove it now as we already have another workaround available.
Change-Id: I291f559d78120fb743a6679b7d927e5bbc5b6b4e
DTS was used in ChunkingHandler. As a result, SegmentInfo contained
timestamp in DTS. MP4Muxer has a logic to change SegmentInfo to use
PTS but not in other muxers.
Benefits of using PTS in ChunkingHandler:
- De-dup the redundant logic in MP4Muxer
- Ensure consistent behavior in different output containers
- Consistent with other timestamps, e.g. Ad Cue timestamps
Issue #413
Change-Id: Ib671badf144e0c0866d60f4ff0ac0cbbdd33817e
We always assumed that text stream started at zero in the text chunker.
This meant that if the text stream started later than zero (like in a
live stream) we would generate a lot of empty segments.
Instead the text chunker will assume that segments should be adjusted
to align with multiple of segment duration. The text chunker will assume
that an earlier component in the pipeline (i.e. text padder) will ensure
that the first sample has the time that we want to start segments at
(even it needs to add an empty sample).
Issue #416
Change-Id: Ie45844354d6e9448787cae896841b5ab31721ed6
Previously, the text padder media handler would assume that text always
started at time zero. This would work for VOD but would result with a
large pad at the start of LIVE content.
To avoid this, the text padder will use a bias to test whether or not it
thinks the content starts at zero. Right now the bias is set to be 10
minutes, but will later be configurable with a command line flag.
10 minutes was used as LIVE content will have much larger values and VOD
content should have much lower values.
Issue: #416
Change-Id: I07af15a577392fb030e36f052085cd4e667700e8
This is a more faithful implementation of more_rbsp_data().
There could be trailing null bytes in NAL units. This isn't valid per
H264 specification, but the referenced bug includes a sample where the
PPS in the avcC record includes a trailing null byte.
Workaround the problem so packager does not fail.
A similar problem is workarounded in Chrome:
https://codereview.chromium.org/1107593004Closes#418
Change-Id: I28cb8a9371945dc094f766c3e559d7a66859b451
When we built the cue alignment media handler, we did not remove
the old solution.
This change removes all the code for the old solution.
Change-Id: I851b284c449c7d25aaabc2f55df5579ba7b5aad1
Originally the create and dispatch of stream data in the cue
alignment tests were separate to improve readability. The idea was
to separate building each stream and dispatching the streams muxed
together would make it easier to understand the streams.
However, coming back to the code, this did not hold up as it took just as
long to understand the code. So merging the two together allows for the
code to be more concise.
Change-Id: I77f6bb67e7fb0ca7af0553c3baf07082770da74c
In the media handler there is an example of what a one-to-many media
handler would be. It used the trick play handler as an example, but that
handler is now a one-to-one media handler. Changed the example to use the
replicator media handler.
Change-Id: I26908c6e27ea4a697a19c0fa0179c60842a449d2
Made ChainHandlers to MediaHandler::Chain so that it can be used in our
test code as well. After all it is a pretty helpful function.
Change-Id: I8d83ee184052cd9fa9b37f2741c96f3223d5ab48
Ran clang-format over media_handler.cc and media_handler.h so that
later changes won't update the formatting as much.
Change-Id: I2db4f9f4e8a66fca1e1418ab99b283a0e4a70e4c
The copy and assign in MediaHandlerGraphTestBase referred to the wrong
types. This changes them to refer to the correct types.
Change-Id: I165c9a1da39b49adf41e7c35ae3e4a0b9ecfa838
Reduce which variables we check in the cue alignment tests by replacing
the less important variables with "_".
Change-Id: Id8770b5f2045ad5c8ac6eee54d6a291d933a4b6f
We have adopted some new standards for how we are writing the media
unit tests. This change goes through the trick play tests and
updates them to be more inline with how we are doing new media
tests.
This include using "_" for parameters that are not the focus of the
tests (used in the EXPECT calls).
This includes wrapping Dispatch calls so that the test bodies can
be more readable.
Change-Id: Iab4b1ce67666b6c8a4a821db1a8f4369cd366dc3
Added a matcher for Video Streams. This will allow us to use a general
matcher in tests for video specific fields.
Change-Id: I91b9aebd66be37ec6d5f09b762263fafaef854c2
Added a StreamTypeToString function in StreamInfo (where stream type is
defined) so that we can print the type in a more readable way.
Change-Id: Icb1d10f5a72dca314d9bdf07e9cd0c0a185bd791
Ran 'clang-format' over stream_info.h and stream_info.cc so that
later changes can focus on the actual changes and not the formatting.
Change-Id: I8a75fe0f88db533f4a811d65dabd023033f07bda
Added the key frame field to the IsMediaSample mather. All
tests that do not care about a sample being a keyframe (or not)
have been updated to use "_".
Change-Id: I44180687c58c260b6856e683d647f532227b14d5
Updated all the stream data matcher we use in our unit tests
to allow us to use matchers in them. We are now able to use "_"
to ignore specific parameters.
With this we were able to replace the different version of
matchers for each stream data type with a single instance for
each type.
Includes updates to printing strings to the listener. Strings
now go through a "pretty" function to help make it easier to
read them in the output.
Change-Id: I146351b54fccd63ab9ec936877e6c6b30f9aa9fc
In the cue aligner, we assumed that all text will be in milliseconds.
This was the last place with that assumption. This change removes that
assumption and uses the stream info's time scale.
Issue #399
Change-Id: Ie21bf27148e020bd85111dcace0bbdff3419c1ac
Before, the text chunker would assume that all text streams were in
MS, which is not a safe assumption to make.
This changes it to take the time scale from StreamInfo and work
natively with scaled time units.
This required updating the tests. While doing so the tests were
rewritten with the goal to make them easier to read.
Closes: #399
Change-Id: Ib792ad306f40d749763418cde645337913a6046b
Make the text stream info factory method in media_handler_test_base
require the caller to specify the time scale.
Issue: #399
Change-Id: Ibdfb183e0aa3f4ff50edf6b58c4e9b966006c6d2
To ensure that every variable in a box is explicitly set
every variable has been assigned a default in the header.
Change-Id: Iaa806c4058ac6621a64363a00040fbd9903c6710
Text Samples with no payload should be ignored, so this adds a
test to check that samples with no payload get treated the
same as a gap.
As long as this case is true, using gaps in our other tests should
functionally be the same as using samples with no payload.
Change-Id: Ic16b240c43eda2514b537a2d938d4135638adc4e
Before we used the sample payload for each text sample as we were
focusing on the times rather than the contents.
As we look to add tests that rely on specific sample payloads, we
need to change the tests to explicitly set the payload for each
sample.
Change-Id: I24174686f46535cf6c2d59a18308101a3bb51c87
EPT (earliest presentation time) may be adjusted not to be lower than
the decoding timestamp (dts), but the adjustment should only be done
on the first file when there is one file per Representation per Period.
The second file and onwards should not be adjusted otherwise a GAP
would be created.
Closes#384
Closes b/78517422
Change-Id: I56771ad8fbbe6a87b832ec58854cfbf37d5f1817
In our text to mp4 tests, we were only checking if the times on
the samples lined-up with what we were expecting.
We want to check that text sample contents (ids, settings, and
payloads) were correctly merged into a single media sample. To
verify this, we now check if the sample ids appear in the
media sample.
Change-Id: Ica1a85a14e7b116275e3571332b2e90d7bc44c45
Joey Parrish
sr90
KongQun Yang
Daniel Cantarín
Vladimir Kazakov
Phillip Baxter
Tomohiro IKEDA
srebrnyp
Denis Akhmetzyanov
Aaron Vaage