Under command line flag --mvex_before_trak.
This is needed to workaround Android MediaExtractor bug which
requires |mvex| to appear before |trak|.
Closes#711.
Change-Id: Id41d71af5c0016f59023dda6408bbf502e12ac55
Added --crypt_byte_block, --skip_byte_block to allow users to specify
protection pattern other than 1:9 for pattern based encryption scheme,
e.g. cbcs and cens.
Closes#710.
b/147307451
Change-Id: I9f64a7639170c737f138572689b28d17286325c7
Per https://dashif.org/docs/DASH-IF-IOP-v4.3.pdf 4.4.3.6 Signalling the last segment number in Period, there are three ways to signal the last segment number:
a. Use the lmsg signalling as defined in clause 4.4.3.5.
b. Use the Segment Timeline with @r value greater or equal to 0.
c. Add a Supplemental Descriptor with @schemeIdUri set to http://dashif.org/guidelines/last-segment-number with the @value set to the last segment number.
We do not support (a). This change adds support for (c) when Segment Timeline (b) is not used, i.e. when Representation has constant duration (could be approximate).
Under flag --dash_add_last_segment_number_when_needed (disabled by default).
AV1-ISOBMFF spec is updated recently to use start alignment instead of
end alignment for cbcs:
for the protected scheme cbcs:
- BytesOfProtectedData SHALL start on the first byte and end on the
last byte of the decode_tile structure (including any trailing bits).
- A subsample SHALL be created for each tile, even if its size is less
than 16 bytes.
- ...
cenc protection scheme is not affected.
Closes#698.
Change-Id: Ic83a478fb2602d830c30daf3206a1c2d2c238a08
Remove custom constructors, which is no longer needed with C++11. Use
C++ struct zero initialization instead.
Fixes#686.
Change-Id: I512da9f23a250e8b9ebf8bb8e0a39ad0f822d0d3
Added Dolby Vision backward compatible signalling, i.e. for Dolby Vision
profile 8, both base codec without Dolby Vision and HDR codec with Dolby
Vision are signalled.
This is achieved by using a new MuxerListener implementation
MultiCodecMuxerListener, which wraps multiple child MuxerListeners and
is able to delegate to the child MuxerListeners based on the codecs in
the stream.
Closes#341.
Change-Id: I1967bb1ed503087cdd011c364e5fb5647d516ca4
HLS uses the EXT-X-MEDIA-SEQUENCE tag at the start of a live playlist in
order to specify the first segment sequence number. This is because any
live playlist have a limited number of segments, and they also keep
updating with new segments while removing old ones. When a player refreshes
the playlist, this information is important for keeping track of segments
positions.
When the packager starts, it naturally starts this count from zero. However,
there are many situations where the packager may be restarted, without this
meaning starting this value from zero (but continuing a previous sequence).
The most common situations are problems in the encoder feeding the packager.
With those cases in mind, this parameter allows to set the initial
EXT-X-MEDIA-SEQUENCE value. This way, it's possible to continue the sequence
number from previous packager run.
Closes#691.
Also updated API keys for both Travis and Appveyor as the previous ones
have expired. And removed shared_library release to avoid confusions.
Fixes#550.
Change-Id: I81b1531a9abb9669be54a2e302346e194d7c363e
Call CRYPTO_library_init to properly initialize crypto engine, which
enables AES-NI (Hardware AES) if it is supported by CPU.
Also added a performance benchmark test.
Closes#198.
Change-Id: I962a2da588d2f4f6cbe00c83ecc9a832db0e6042
Also roll_boringssl.py script is also adjusted to work with latest
boringssl.
Disable ASM compilation on Windows x64 which fails to compile. It also
means there are no HW AES on Windows x64.
Issue #198.
Change-Id: Ib7e8ff506f014c8c733f1882eeeddbe34fa28511
For MP4 files, mp4 parser tries to open and read the same file again
to handle trailing MOOV box.
Open FIFO again may result in packager hang.
Update the code to only attempt to load MOOV for local regular files,
as FIFO and remote files are unseekable anyway.
Fixes#664.
Change-Id: Ib286d2876d202cd5a248ffe70b13589b3cc74bc9
Although FRAME-RATE is optional per HLS specification, but per HLS
Authoring Specification for Apple Devices (https://apple.co/30n90DC):
Each EXT-X-STREAM-INF tag MUST have a FRAME-RATE attribute.
Also, iOS and TVos refuse to play the content if VIDEO-RANGE is
present but FRAME-RATE is missing.
Issue #632, #634.
Change-Id: Ica282f023a7e8538f7b506094e2286840cf5c193
Calculate FRAME-RATE from sample duration as in the DASH solution.
Right now calculated frame-rate may not be accurate in some scenarios,
so we avoid setting the attribute in HLS unless it is more than 30
fps. We will set it unconditionally once it is fixed.
Fixes#634.
Change-Id: I87b6e9a047d959ae88dd4dcb2b4786527ba5c9fc
- Parse and extract transfer_characteristics from H264/H265 VUI
parameters.
- Set VIDEO-RANGE attribute in HLS according to HLS specification:
https://tools.ietf.org/html/draft-pantos-hls-rfc8216bis-02#section-4.4.4.2
- Also added an end to end test.
Fixes#632.
Change-Id: Iadf557d967b42ade321fb0b152e8e7b64fe9ff3e
- Add relevant FOURCCs for Dolby Vision.
- Parse DOVIDecoderConfigurationRecord (dvcC, dvvC) to generate
Dolby Vision codec string.
- Propagate Dolby Vision configs (dvcC, dvvC, hvcE) from Demuxer
to Muxer.
- Add a Dolby Vision end to end test.
Support for backward compatibility signaling in DASH and HLS will be
added in a later CL.
Issue #341
Change-Id: If1385df5f48e04b59cb7661130bea48e26b453bf
Latest version of FFmpeg encodes non standard channel layout, e.g. 5.1(side), in AAC using PCE.
This is now supported with the below changes:
- Allow channel_configuration in ADTS header to be 0, as the cctual channel layout is specified
in PCE.
- Add GetFrameSizeWithoutParsing to determine the frame size before actually parsing the frame.
- Skip and resume later if not the whole frame is available.
- Also ensure that the next frame starts with a proper sync word.
Fixes#598.
Store and use the segment start time in the original time scale to
delete old segments, instead of storing it in seconds, as the segment
file name is generated using the time with the time scale.
Fixes#625.
Change-Id: I7524d597b1ffc081dd1399d6fb3ea47c13502881
- Parses parameter set NAL units in the samples.
- Calculate pixel width and height from track width and height.
Fixes#621, #627.
Change-Id: Ic1e120dccbd220b01168f7bf4effeaa43f95b055
We used to use the target segment duration provided by the user.
Unfortunately that does not work for iframe only playlist which
the target duration is effectively equal to the GOP duration.
In the new approach, we estimate the target duration from the initial
few blocks (10 blocks right now).
Fixes#610.
Change-Id: Ie8bf943e157149ca7ed3b9382fe0a1088d0774e2
Add dash_accessibilities stream descriptor, which is a semi-colon
separated list of accessibility_scheme_id_uri=value. It is optional.
Add dash_roles stream descriptor, which is a semi-colon separated
list of strings. It is optional.
Closes#565.
Change-Id: Idb1c20bb410fdd016db07e11fe507c102a3dd8ea
And also dvhe with dvh1.
Apple's specification does not recommend video formats with the
parameter sets stored in the samples.
It also fails mediastreamvalidator checks and some Apple devices /
platforms refused to play.
See https://apple.co/30n90DC 1.10.
Replaced with the corresponding formats with the parameter sets stored
in the sample descriptions instead.
Fixes#587.
Change-Id: Ic5d3f6fde115b1d09d1dcac32cef5fe0ad246aa0
We have logics in bandwidth calculation to ignore segments that is
smaller than half of target duration. The logic does not have any
effect right now as the target duration in mpd/hls params is always
zero.
This change will set target duration in mpd/hls params, thus it can fix
part of issue #581 as the last segment which is less than half of
target duration.
Issue #581.
Fixes#498.
Change-Id: Ieb2dbf4da9fc72a7b9de802cda4294f1954d29b4
Segment start,end time was used previously, which could result in
problems if there are discontinuity in the streams. E.g. if the
stream has timestamp, 10000, 10001, 10002 and then next segment
comes in with timestamp 1. With the previous logic, all the segments
would remain in the time shift buffer until after 10000 segments
even with a small time shift buffer depth of 10.
This could also happen when timestamp wraps around, which could
happen during long time of live streaming.
This change will also be useful to support multi-period live DASH.
Fixes#563.
Change-Id: Ie078d76c6e4af13ade9ad46191c8e3529069ed4d
Tomohiro IKEDA
sr90
KongQun Yang
Widevine Buildbot
Daniel Cantarín
Vladimir Kazakov
Phillip Baxter
Herlon Aguiar