Support Dolby Vision profile 8.1, 8.2, 8.4, 10.1, 10.4 signaling in HLS
and DASH.
Adds new option `--use_dovi_supplemental_codecs` (off by default) to use
SUPPLEMENTAL-CODECS in HLS and `scte214:supplementalCodecs` and
`scte214:supplementalProfiles` for DASH.
To maintain compatibility with existing players the current behavior of
using two entries in the manifest remains the default. This will be
changed in a future version where `use_dovi_supplemental_codecs` will
become on by default.
Adds Dolby Vision compatible brands, 'db1p', 'db2g', 'db4g', 'db4h',
'dby1' based on https://mp4ra.org/#/brands
---------
Co-authored-by: Xingzhao Yun <xyun@dolby.com>
Set the start number in representation to the segment index that is sent by muxer.
With this enhancement, you can now specify the initial sequence number
to be used on the generated segments when calling the packager.
With the old implementation, it was always starting with "1".
---------
Co-authored-by: Cosmin Stejerean <cstejerean@meta.com>
Use the second sample in mp4 and webm formats. #835 had issues with
merging due to golden file conflicts. Because we cannot make dependent
pull requests, this is a replica of #835.
---------
Signed-off-by: Cosmin Stejerean <cstejerean@meta.com>
Co-authored-by: Cosmin Stejerean <cstejerean@meta.com>
This work was done over ~80 individual commits in the `cmake` branch,
which are now being merged back into `main`. As a roll-up commit, it is
too big to be reviewable, but each change was reviewed individually in
context of the `cmake` branch. After this, the `cmake` branch will be
renamed `cmake-porting-history` and preserved.
---------
Co-authored-by: Geoff Jukes <geoffjukes@users.noreply.github.com>
Co-authored-by: Bartek Zdanowski <bartek.zdanowski@gmail.com>
Co-authored-by: Carlos Bentzen <cadubentzen@gmail.com>
Co-authored-by: Dennis E. Mungai <2356871+Brainiarc7@users.noreply.github.com>
Co-authored-by: Cosmin Stejerean <cstejerean@gmail.com>
Co-authored-by: Carlos Bentzen <carlos.bentzen@bitmovin.com>
Co-authored-by: Cosmin Stejerean <cstejerean@meta.com>
Co-authored-by: Cosmin Stejerean <cosmin@offbytwo.com>
This converts all time parameters to signed, finishing a cleanup that
was started in 2018 in b4256bf0. This changes the type of:
- timestamps
- PTS specifically
- timestamp offsets
- timescales
- durations
This excludes:
- MP4 box definitions
- DTS specifically
This is meant to address signed/unsigned conversion issues on arm64
that caused some test cases to fail.
Change-Id: Ic752a20cbc6e31fea6bc0894d1771833171e7cbe
Now text-based WebVTT also uses the generic media pipeline. This
converts the WebVttTextOutputHandler to a WebVttMuxer to be more
consistent with the other muxer types.
This also allows choosing between single-segment text and multi-segment.
Before, we would generate both and use single-segment for DASH and
multi-segment for HLS; but now you can choose between either and either
are supported in both DASH and HLS.
Change-Id: I6f7edda09e01b5f40e819290d3fe6e88677018d9
In addition to the MediaSample handling of the MediaParser, this now
adds callbacks for TextSample. This allows reading text streams from
the media files.
Change-Id: I6c00e286e98bc9aafe05b99cf2f7ce6f89d167a9
- Parse and extract transfer_characteristics from H264/H265 VUI
parameters.
- Set VIDEO-RANGE attribute in HLS according to HLS specification:
https://tools.ietf.org/html/draft-pantos-hls-rfc8216bis-02#section-4.4.4.2
- Also added an end to end test.
Fixes#632.
Change-Id: Iadf557d967b42ade321fb0b152e8e7b64fe9ff3e
The VP9 level is computed when the container is missing a codec config
or if the level is missing from the codec config.
This fixes VP9 in ISO-BMFF files generated by FFmpeg v4.0.2 or earlier
which does not have level set in the codec config.
Fixes#469.
Change-Id: I685bfd48be16ee6b2209da1c3173f7d6bb02b36a
Implemented per AV1 Codec ISO Media File Format Binding at
https://aomediacodec.github.io/av1-isobmff/
And AOM AV1 codec mapping in Matroska/WebM at
https://github.com/Matroska-Org/matroska-specification/blob/av1-mappin/codec/av1.md
Note that AV1 specific boxes are not supported in this CL, i.e.
AV1 Forward Key Frame sample group entry 'av1f', AV1 Multi-Frame
sample group entry 'av1m' etc are not supported. These boxes are optional.
We will add support later if they are useful to the clients / players.
Encryption is not supported yet.
Issue #453.
Change-Id: I630432d0a9bf82d263ffaf40e57f67fc65eee902
- Also fixed compilations in Alpine Linux and other flavors of Linux.
- Added container versions in docker files to always use a verified
version.
Closes#164.
Change-Id: I949a8709e4d70c49129c9c2e8608dd78193d964c
Configurable with --transport_stream_offset_ms.
This is needed to compensate for possible negative timestamps in
inputs, which could happen on ISO-BMFF with EditLists.
Issue #112.
Change-Id: I0fce8766c9df2911b9bb859c1e54052a8ed2abfb
Packager uses ThreadedIO to write media segments and manifest /
playlists. There was a possibility that media segments write being
delayed and scheduled after updating manifest / playlists.
This CL fixes the race condition.
Also added a note on how segments can be synced to cloud storage to
avoid the race condition during file sync.
Also added a live WebM test.
Fixes#386.
Change-Id: Icf9c38cdec715fa3dc2836eab1511131e129fe41
Seeing some failures on some platforms when compiled with clang
disabled:
GYP_DEFINES="clang=0" gclient runhooks
Several changes to make it work:
1. Mark packager code with packager_code=1 in GYP definitions.
2. Disable a few checks in non-packager code, which we do not have
direct control: dangling-else, deprecated-declarations,
unused-function
3. Fix the relevant errors in packager code.
4. Revert HAVE_STROPTS_H in curl config which is not available in
all linux distributions.
Fixes#286Fixes#293
Change-Id: I729b41f99403c5ad9487c6cc4a7dc06f6323cef8
Use std::shared_ptr<const uint8_t> with a custom deleter to
represent MediaSample::data_ instead of std::vector<uint8_t>.
MediaSample::data_ can be shared by multiple MediaSamples and it is
immutable. A new data instance must be created if the clients want to
modify the underlying data. The new data instance can be transferred
to MediaSample using provided MediaSample::TransferData function.
This avoids unnecessary data copying.
Change-Id: Ib59785a9e19d0abb3283179b12eb6779ee922f79
In prep for changes to Trick Play, we want to make all messages
copy on write so that if the same message is sent to multiple
handlers, it is not possible for one handler to change the data
another handler is using.
Change-Id: I554166ca11c532412e4dfced5603972ca24dc2bb
Previously packaging completes successfully without any error
or warning.
With the fix, an error will be reported if write fails. It may
appear as "Cannot close file error" as we use threaded IO, which
could delay the error reporting until Close() call, so the user
of the File API needs to make sure Close() returns successfully.
Also fixed a deadlock in threaded_io_file if internal_file->Write
fails.
Fixes#160
Change-Id: I17f945150fb4021d2dcdbe784e557673f53ca583
Derive file size from media ranges instead.
Also fix subsegment range reporting for WebM (internal variable,
no output affected).
Change-Id: I5f8152dff4c2cd5fbae5550992b86a669e278f7b
- Changed OnMediaEnd() to take (sub)segment ranges.
- Define a structure to pass the ranges.
- This requires muxers to "cache" the segment ranges but in most cases,
they already do it, e.g. 'sidx' for mp4.
Change-Id: I16b974c1f0f54ca658cc6dbe605efff84a3f52eb
- Implemented according to v1.0 spec @ https://www.webmproject.org/vp9/mp4/
- v0 is no longer supported
Change-Id: I189c813d788400beda797eea7da943a83dfa7d79
Added a flag --strip_parameter_set_nalus. When enabled, parameter
set NAL units, SPS/PPS for H264 and SPS/PPS/VPS for H265, are stripped
from frames when converting NAL byte stream (AnnexB stream) to NAL
unit stream, which generates avc1/hvc1; otherwise they are not
stripped, and avc3/hev1 is generated.
Parameter set NAL units should not be stripped if they are varying
in the frames otherwise the frames may fail to be decoded.
The flag is enabled by default as we don't usually see varying
SPS/PPS/VPS and it is more space efficient with them stripped.
Set --strip_parameter_set_nalus=false to disable the flag if there
are varying SPS/PPS/VPS in the frames. This addresses #206.
Change-Id: I34bde6f33069f9f77d51a510b39f58a0f0e141aa
Also moved MediaHandler output validation to Initialize instead.
This CL also addresses #122 with consistent chunking.
Change-Id: I60c0da6d1b33421d7828bcb827d18899e71884ce
- Also sets up the packaging and verify it works.
Some of the changes are temporary to get the integration going.
Change-Id: I0cf6c379d185e157808acabb9ef58ff93d4a39ae
- Deprecated command line flags --profile and --single_segment.
'segment_template' in stream descriptors implies live profile
and non-single segment.
- Added flag --generate_static_mpd_for_live_profile to generate
static mpd for live profile; if not set, dynamic mpd will be
generated.
Close#142
Change-Id: I78879297ed118f0f246c4753a16ad125bd6b5e4f
Cosmin Stejerean
sr90
Anthony Lu
Joey Parrish
Joey Parrish
Mattias Wadman
Sergio Garcia Murillo
Jacob Trimble
KongQun Yang
Haoming Chen
Aaron Vaage
Rintaro Kuroiwa
Haoming Chen