In many places, we used std::numeric_limits without including the
proper header. This would build on some Linux distributions, but not
others.
This adds the missing includes, fixing the build on Fedora, among
other distros.
Change-Id: I63e9e37e5973fe23bbdf9868552db51062b1dae4
## The issue
- With LL-DASH mode enabled, the gap size warning was hit and printed to the console every time a new segment was registered to the manifest.
- This occurred because the first chunk's size and duration were being stored for each segment, rather than the full segment size and duration. Note, only the first chunk's metrics are known at first because in low latency mode, the segment is registered to the manifest before it is finished being processed and written.
- Because of this, the gap size check was comparing the end time of the first chunk in the previous segment to the beginning time of the current segment, causing the check to fail every time.
## The Fix
- Update a low latency segment's duration and size once the segment file has been fully written.
- The full segment size and duration will be used to update the bandwidth estimator and the segment info list.
- Updating the segment info list to hold the full duration is necessary for satisfying [the gap size check found in Represenation.cc](https://github.com/google/shaka-packager/blob/master/packager/mpd/base/representation.cc#L391).
- NOTE: bandwidth estimation is currently only used in HLS
# LL-DASH Support
These changes add support for LL-DASH streaming.
**NOTE:** LL-HLS support is still in progress, but it's coming. :)
## Testing
`./chunking_unittest --gtest_filter="ChunkingHandlerTest.LowLatencyDash"`
`./media_event_unittest --gtest_filter="MpdNotifyMuxerListenerTest.LowLatencyDash"`
`./mpd_unittest --gtest_filter="PeriodTest.LowLatencyDashMpdGetXml"`
`./mpd_unittest --gtest_filter="SimpleMpdNotifierTest.NotifyAvailabilityTimeOffset"`
`./mpd_unittest --gtest_filter="SimpleMpdNotifierTest.NotifySegmentDuration"`
`./mpd_unittest --gtest_filter="LowLatencySegmentTest.LowLatencySegmentTemplate"`
Note, packager_test must be run from the main project directory
`./out/Release/packager_test --gtest_filter="PackagerTest.LowLatencyDashEnabledAndUtcTimingNotSet"`
`./out/Release/packager_test --gtest_filter="PackagerTest.LowLatencyDashEnabledAndUtcTimingNotSet"`
This converts all time parameters to signed, finishing a cleanup that
was started in 2018 in b4256bf0. This changes the type of:
- timestamps
- PTS specifically
- timestamp offsets
- timescales
- durations
This excludes:
- MP4 box definitions
- DTS specifically
This is meant to address signed/unsigned conversion issues on arm64
that caused some test cases to fail.
Change-Id: Ic752a20cbc6e31fea6bc0894d1771833171e7cbe
This brings our default build config more in line with what is
necessary for some platforms anyway: using the system-installed
toolchain and sysroot to build everything.
We will no longer fetch source or binaries for any specific build
tools, such as libc++, clang, gold, binutils, or valgrind.
The main part of this change is the changing of default gyp settings
in gyp_packager.py. For this, a bug in gyp_packager.py had to be
fixed, in which similar GYP_DEFINE key names (such as clang and
host_clang) would conflict, causing some defaults not to be installed
properly.
In order to enable clang=0 by default, some changes had to be made in
common.gypi:
- compiler macros added to fix a compatibility issue between
Chromium's base/mac/ folder and the actual OSX SDK
- replaced clang_warning_flags variables with standard cflags
settings, plus xcode_settings for OSX
- turned off warnings-as-errors for non-shaka code, rather than
allow-listing specific warning types, since we can't actually fix
those warnings on any platform
- disabled two specific warnings in shaka code, both of which are
caused by headers from our non-shaka dependencies
Also, one warning (missing "override" keyword) has been fixed in
vod_media_info_dump_muxer_listener.h.
Although these changes were done to make building simpler on a wider
array of platforms (arm64, for example), it seems to make the build a
bit faster, too. For me, at least, on my main Linux workstation:
- "gclient sync" now runs 20-30% faster
- "ninja -C out/Release" now runs 5-13% faster
The following environment variables are no longer required:
- DEPOT_TOOLS_WIN_TOOLCHAIN
- MACOSX_DEPLOYMENT_TARGET
Documentation, Dockerfiles, and GitHub Actions workflows have been
updated to reflect this.
The following GYP_DEFINES are no longer required for anyone:
- clang=0
- host_clang=0
- clang_xcode=1
- use_allocator=none
- use_experimental_allocator_shim=0
Documentation, Dockerfiles, and GitHub Actions workflows have been
updated to reflect this.
The following repos are no longer dependencies in gclient:
- binutils
- clang
- gold
- libc++
- libc++abi
- valgrind
The following gclient hooks have been removed:
- clang
- mac_toolchain
- sysroot
Change-Id: Ie94ccbeec722ab73c291cb7df897d20761a09a70
Because a StreamState object contains a unique_ptr, it is not
copyable. A vector of StreamStates, therefore, causes a compile error
on resize or push_back, both of which invoke the copy constructor.
I don't know why MSVS complains, but clang does not.
To fix this, I'm changing vector<StreamState> into deque<StreamState>.
At this point static_library builds are working in MSVS 2019.
shared_library builds are still not working.
Issue #867 (MSVS 2019)
Issue #336 (progress toward replacing Travis & Appveyor with GitHub
Actions, which uses MSVS 2019)
b/190743862 (internal; tracking replacement of Travis)
Change-Id: Iaa9d5fc357102d15eac96c29ebeee7c7236e976b
It is not working correctly in gcc 4.8 or earlier, which is still
popular (bundled by default in CentOS 7).
Issue #865, #929.
Change-Id: I136446a70831bd0237cd29646dd349fe7558176b
Legacy players, e.g. older versions of ExoPlayer, do not handle default webvtt text alignment correctly. Need to specify `align:center` explicitly cues without text alignment for backwards compatibility.
Fixes#925.
It is not working correctly in gcc 4.8 or earlier, which is still
popular (e.g. bundled by default in CentOS 7).
Fixes#865, #929.
Change-Id: I55a42428dbd2a12fc2c3b1e6a49fdd662a295dca
This also allows setting the language of different text streams from
the same input. Multiple streams can use the same input stream
using different cc_index values and can each use a different language.
This also will try to pull the language from the input if not
specified.
Change-Id: I7078710b509b7d77dad8cb4299a82f954af7e9e7
Note that this only supports a single page within the DVB-sub stream.
Multiple pages will be merged together. A follow-up will allow
selecting a specific page.
This only supports outputting using TTML or MP4+TTML; you cannot have
DVB-sub output nor can you output it in WebVTT. Since DVB-sub
uses images, it is hard to impossible to do this with WebVTT.
This also only supports interlaced images, not progressive images
nor text.
Closes#832
Change-Id: Id6dbb6393c7b9a05722e61c6bd255bef5e69a7d8
Issue #149
Co-authored-by: Andreas Motl <andreas.motl@elmyra.de>
Co-authored-by: Rintaro Kuroiwa <rkuroiwa@google.com>
Co-authored-by: Ole Andre Birkedal <o.birkedal@sportradar.com>
Previously if there are no bytes remaining, SkipBytes(0) would fail,
which results in parsing error in
AACAudioSpecificConfig::ParseProgramConfigElement.
Fixes#875.
Change-Id: I271899a37303d0d3fa0cf1bf90f99227058b82df
I.e. the flag --generate_sidx_in_media_segments,
--nogenerate_sidx_in_media_segments work for both single-segment
and multi-segment mode with this change.
Related to #862.
Change-Id: Icd27fd00e8e036ba0c4709b48650372429cc0351
The reference count in 'sidx' box is a uint16 field, which allows at
most 0xFFFF entries, i.e. at most 0xFFFF subsegments, which is roughly
18 hours for one second segments.
Do not fail packaging when it happens. Instead, generate a warning and
truncate the number of references to 0xFFFF instead.
Note that the actual number of mp4 fragments in the mp4 file can still
be more than 0xFFFF. The stream will not play to the end in DASH, but
it will play successfully in HLS.
Workarounds #862.
Change-Id: Ib3930418d1528df1f9ea64cda0d0ebaa78d26abb
This also changes the callbacks a bit to (a) avoid passing references
for already ref-counted types, and (b) don't pass PID since the
parent knows this and gives it to the child parser.
Issue #832
Change-Id: I7dd44436c8d1ad81d42a813d16f850175b85ad1a
This changes the default MP4 output to use TTML and adds a way to
choose which one is used. This is done with 'format=ttml+mp4' or
'format=vtt+mp4'.
This also fixes the boxes output in WebVTT in MP4.
Change-Id: Ieaa7fc44fbf4dc020a5bb70cfa3578ec10e088ce
This only supports TTML output; meaning the user can convert WebVTT
into TTML, but not the other way around. This will be useful for
DVB-sub subtitles that would be better supported within TTML.
This only adds text-based output; a follow-up will add MP4 support.
Change-Id: I0944b7df95d7765e55f203fc5e9a644f5c455dd8
This adds a new path when parsing MPEG2-TS streams to ignore unsupported
streams. This allows extracting supported streams when some of the
streams are unsupported. For example, you can extract audio from a
file that has unsupported video.
Change-Id: I608fcb19d0a573bfd35e9272f60b0b69346ae11a
This adds more generic settings for regions and CSS styles. These are
global settings, so they go on the StreamInfo object.
Change-Id: Ibb76c060206152ccf8e9a067c09877226f67c927
Now text cues are composed of nested fragments that can be individually
styled. This allows portions of the cue to be bold, etc. The
WebVTT parser doesn't parse the inputs, but the original tags are
preserved in WebVTT output. The WebVTT output will add tags if the
style elements are present in the cue object.
Change-Id: I6abba4175e376e4f753193f7d8cac63e958d3c89
Now the Cue settings are a generic object that is parsed in WebVTT.
This will allow setting the settings in different parsers without having
to use WebVTT-specifics.
Change-Id: I36689bec725bd2e515af962b7174fc5977f96fa2
This sets the groundwork for more generic text cues by having a more
generic object for the settings and the body. This also changes the
TextSample to be immutable and accepts the fields in the constructor
instead of using setters.
Change-Id: I76b09ce8e8471a49e6bf447e8c187f867728a4bf
Now text-based WebVTT also uses the generic media pipeline. This
converts the WebVttTextOutputHandler to a WebVttMuxer to be more
consistent with the other muxer types.
This also allows choosing between single-segment text and multi-segment.
Before, we would generate both and use single-segment for DASH and
multi-segment for HLS; but now you can choose between either and either
are supported in both DASH and HLS.
Change-Id: I6f7edda09e01b5f40e819290d3fe6e88677018d9
Now the same pipeline for handling the audio/videos streams will handle
the segmented text streams too. This doesn't apply to the text output,
only to the MP4 variants. This also fixes a bug where we added the
X-TIMESTAMP-MAP tag even when there wasn't TS streams; this doesn't
otherwise change the behavior around that tag.
Change-Id: I03f7cea56efa42e96311c00841330629a14aa053
The test added in the previous CL was broken due to a rebase on another
change. This subtly changed some of the byte offsets that broke the
test. This wasn't caught since I didn't rebase and re-run the tests
before merging.
Change-Id: Id7e4c7688278eae37da1a14f1648263b4dda98cd
This changes it from an OriginHandler to a MediaParser and moves the
handling of it to the Demuxer. This will allow more generic handling
of text by giving it the same abstractions as video/audio handling.
Change-Id: Ibbde3c84d228ec8e83af1ed266ea97dbc9589c24
In addition to the MediaSample handling of the MediaParser, this now
adds callbacks for TextSample. This allows reading text streams from
the media files.
Change-Id: I6c00e286e98bc9aafe05b99cf2f7ce6f89d167a9
Instead of having the text readers reading from the file directly, they
now accept the data as a stream.
Change-Id: Id1b32c867a8058a68ae7aab5c568f77672a4401d
The KeySource now only handles fetching the keys and loading any PSSH
info from the license; it will not handle generating new PSSH info
based on the config.
This will allow the PSSH generation to access to the full
EncryptionConfig so we can add additional options to it.
Issue #756
Change-Id: Ia67387aa3d5ec0d723b7f5f21fc517f64c840393
There were several enum types that all were used for key systems. This
combines them into one to make it more clear and only needing to update
one. This also uses a bit field to specify multiple key systems instead
of using a std::vector.
Change-Id: Ia88039835492a5bd47f449ba4b76187046deeec0
The resolution values are uninitialized when parsing AVC decoder
configuration record if it does not contain parameter sets (SPS/PPS),
thus they could contain undefined values.
Fixes#750.
Change-Id: I6d54ec9f8740acd45a67b4b7d69031e097fbacc1
Opening a named pipe can block until both ends are open, and we cannot
control when the other end will be open. Ideally, we would always
open files in a thread so that Packager can be used with piped inputs
from naive applications without a potential deadlock.
This change will defer opening WebVTT files until the parser Run()
method is called from a thread. This way, WebVTT files being sent in
from a pipe will never be able to block the main thread.
Previously, files were opened on the main thread before calling the
parser constructor, passing the open file to the constructor as an
argument. I also tried doing it in the parser's InitializeInternal()
method, but that is also called from the main thread.
Change-Id: I54cc68ed9d48a8dc697829119be84d4065b1ae1c
Under command line flag --mvex_before_trak.
This is needed to workaround Android MediaExtractor bug which
requires |mvex| to appear before |trak|.
Closes#711.
Change-Id: Id41d71af5c0016f59023dda6408bbf502e12ac55
Added --crypt_byte_block, --skip_byte_block to allow users to specify
protection pattern other than 1:9 for pattern based encryption scheme,
e.g. cbcs and cens.
Closes#710.
b/147307451
Change-Id: I9f64a7639170c737f138572689b28d17286325c7
AV1-ISOBMFF spec is updated recently to use start alignment instead of
end alignment for cbcs:
for the protected scheme cbcs:
- BytesOfProtectedData SHALL start on the first byte and end on the
last byte of the decode_tile structure (including any trailing bits).
- A subsample SHALL be created for each tile, even if its size is less
than 16 bytes.
- ...
cenc protection scheme is not affected.
Closes#698.
Change-Id: Ic83a478fb2602d830c30daf3206a1c2d2c238a08
Remove custom constructors, which is no longer needed with C++11. Use
C++ struct zero initialization instead.
Fixes#686.
Change-Id: I512da9f23a250e8b9ebf8bb8e0a39ad0f822d0d3
Added Dolby Vision backward compatible signalling, i.e. for Dolby Vision
profile 8, both base codec without Dolby Vision and HDR codec with Dolby
Vision are signalled.
This is achieved by using a new MuxerListener implementation
MultiCodecMuxerListener, which wraps multiple child MuxerListeners and
is able to delegate to the child MuxerListeners based on the codecs in
the stream.
Closes#341.
Change-Id: I1967bb1ed503087cdd011c364e5fb5647d516ca4
Call CRYPTO_library_init to properly initialize crypto engine, which
enables AES-NI (Hardware AES) if it is supported by CPU.
Also added a performance benchmark test.
Closes#198.
Change-Id: I962a2da588d2f4f6cbe00c83ecc9a832db0e6042
For MP4 files, mp4 parser tries to open and read the same file again
to handle trailing MOOV box.
Open FIFO again may result in packager hang.
Update the code to only attempt to load MOOV for local regular files,
as FIFO and remote files are unseekable anyway.
Fixes#664.
Change-Id: Ib286d2876d202cd5a248ffe70b13589b3cc74bc9
Calculate FRAME-RATE from sample duration as in the DASH solution.
Right now calculated frame-rate may not be accurate in some scenarios,
so we avoid setting the attribute in HLS unless it is more than 30
fps. We will set it unconditionally once it is fixed.
Fixes#634.
Change-Id: I87b6e9a047d959ae88dd4dcb2b4786527ba5c9fc
- Parse and extract transfer_characteristics from H264/H265 VUI
parameters.
- Set VIDEO-RANGE attribute in HLS according to HLS specification:
https://tools.ietf.org/html/draft-pantos-hls-rfc8216bis-02#section-4.4.4.2
- Also added an end to end test.
Fixes#632.
Change-Id: Iadf557d967b42ade321fb0b152e8e7b64fe9ff3e
- Add relevant FOURCCs for Dolby Vision.
- Parse DOVIDecoderConfigurationRecord (dvcC, dvvC) to generate
Dolby Vision codec string.
- Propagate Dolby Vision configs (dvcC, dvvC, hvcE) from Demuxer
to Muxer.
- Add a Dolby Vision end to end test.
Support for backward compatibility signaling in DASH and HLS will be
added in a later CL.
Issue #341
Change-Id: If1385df5f48e04b59cb7661130bea48e26b453bf
Latest version of FFmpeg encodes non standard channel layout, e.g. 5.1(side), in AAC using PCE.
This is now supported with the below changes:
- Allow channel_configuration in ADTS header to be 0, as the cctual channel layout is specified
in PCE.
- Add GetFrameSizeWithoutParsing to determine the frame size before actually parsing the frame.
- Skip and resume later if not the whole frame is available.
- Also ensure that the next frame starts with a proper sync word.
Fixes#598.
- Parses parameter set NAL units in the samples.
- Calculate pixel width and height from track width and height.
Fixes#621, #627.
Change-Id: Ic1e120dccbd220b01168f7bf4effeaa43f95b055
Add dash_accessibilities stream descriptor, which is a semi-colon
separated list of accessibility_scheme_id_uri=value. It is optional.
Add dash_roles stream descriptor, which is a semi-colon separated
list of strings. It is optional.
Closes#565.
Change-Id: Idb1c20bb410fdd016db07e11fe507c102a3dd8ea
This is needed for Dolby Vision as Dolby Vision uses NAL unit type 62
to carry private information.
Issue #341.
Change-Id: Ib3f06d8f36ef3d89c33162dd74c012a0c3a805e5
- Define BaseDescriptor and generic read / write operations.
- Define descriptors: ESDescriptor, DecoderConfigDescriptor,
DecoderSpecificInfoDescriptor, SLConfigDescriptor.
DecoderSpecificInfoDescriptor and all other descriptors can now
handle arbitrary length size, not limiting to 64 byte for
DecoderSpecificInfoDescriptor, which was placed to limit
ESDescriptor length size to one byte.
- Now DecoderConfigDescriptor is able to handle reading and writing
of all fields including buffer_size_db, which was not handled
earlier.
Fixes#536.
Change-Id: Ia8a775f8bf6e90e3343a85f0e643bc44cd017c7a
Add crypto_period_seconds to Widevine key request
When using key rotation with Widevine DRM, a key server has to know
the duration of crypto period to relate generated keys to the media
playback time. This helps the server to provide relevant keys to
a client during license request.
Closes#544.
VLC seems to generate access units with extra AUDs. In #526, the below
sequence is seen:
AUD | SPS | PPS | SPS | PPS | AUD | SEI | SEI | SEI | IDR_SLICE
Previously we exit early when seeing AUD, which results in delayed
processing of the access unit.
The behavior is changed to continue processing the following NAL units
to workaround the content issue.
Closes#526.
Change-Id: I80f571c0711c6db1337eb393fce36fae5432b6c5
Joey Parrish
Caitlin O'Callaghan
nvincen
KongQun Yang
Samidh
Mattias Wadman
Vishal Shah
Daniel Cantarín
Jacob Trimble
Sergio Garcia Murillo
JPeMu
Ole Andre Birkedal
koln67
akata01
sr90
Weiguo Shao
Joe Foraci
Zajcev Evgeny
Alen Vrečko
Tim Lansen
Vladimir Kazakov
Phillip Baxter
Tomohiro IKEDA
srebrnyp