The old vtt sample data has the header as "WEBVTT FILE" which does
not reflect what the spec says it should be.
This changes it to "WEBVTT" as described in the WebVTT spec.
Change-Id: Ib54396a8b937501a835dafe966bf05b95b0b22c4
- Add empty lines between different types of renditions to improve
readability.
- Group variants with the same audio/text group together, as it is
where the Adaptation occurs.
- Write master playlist after writing media playlists. This makes
more sense and it is also necessary to have the bandwidth of
the last iframe playist segment correctly computed.
- For fMP4, I-Frame segment must include the 'moof' header.
- Fix a problem that hls_iframe_playlist_name is not passed to
MuxerListenerFactory.
Issue: #287
Change-Id: Icf37c5de1dc29f85ae3f419cbc3264d04ca491a4
If no hls group name is given, we would default to "audio" but as
we are working to support text, this won't make sense to see
GROUP="audio" on a text stream.
Instead default to "default-audio-group" for audio streams. A specific
text default will be added later.
Bug: #205
Change-Id: Iefc8bfd35708286619d0004348294d98f2c38482
The IV was incorrectly updated across samples.
Created a new cryptor SampleAesEc3Cryptor specially for SAMPLE-AES
EC3 encryption / decryption. The new cryptor uses constant-iv, and
makes sure the IV is reset to the initial value at the beginning
of each audio frame and chained across syncframes within the the
audio frame.
Also added E-AC3 end to end test.
Fixes#279
Change-Id: I0aa60c17836daeef5ba433a05e5ff0906191d9ac
According to HLS spec: https://goo.gl/MiqjNd 4.3.4.1.1. Rendition Groups
- A Group MUST NOT have more than one member with a DEFAULT attribute of
YES.
- Each EXT-X-MEDIA tag with an AUTOSELECT=YES attribute SHOULD have a
combination of LANGUAGE[RFC5646], ASSOC-LANGUAGE, FORCED, and
CHARACTERISTICS attributes that is distinct from those of other
AUTOSELECT=YES members of its Group.
We tag the first rendition with a particular language in an audio group
with 'AUTOSELECT'; it is tagged with 'DEFAULT' too if the language
matches --default_language.
Fixes#315
Change-Id: Iacc0bc8c89ebffce8717fa65e82d6daf5a1f6adc
As specified in HLS spec (https://tools.ietf.org/html/rfc8216):
All audio EXT-X-MEDIA tags SHOULD have a CHANNELS attribute. If a
Master Playlist contains two Renditions encoded with the same
codec but a different number of channels, then the CHANNELS
attribute is REQUIRED; otherwise, it is OPTIONAL.
Fixes#299
Change-Id: Ic2308c39b170178b11cb0d94c3a8083c8b5f3353
- Remove the TS key rotation not supported check as there is nothing
to be done for key rotation in TS for SAMPLE-AES.
- Fix IV updated problem in new segments even if crypto period does
not change.
- Avoid duplicate EXT-X-KEY tags if it does not change.
- Make EXT-X-DISCONTINUITY-SEQUENCE match with number of removed
EXT-X-DISCONTINUITY.
- Added end to end test for HLS with key rotation.
Change-Id: I73cb82e9f5575fcdf63ee643228efe78e6766302
The HLS manifests output by the packager did not have the RESOLUTION
attribute on EXT-X-STREAM-INF tags. This change adds the resolution
tag when resolution values are present.
Close#235
Change-Id: I15ca6de47cb34793cf6a940123d593261627baa4
This addresses playready broken with clear lead = 0.
clear lead != 0 is still broken with playready on Edge. We think it is
likely an Edge bug, which does not support multiple sample entry boxes,
thus does not support clear lead.
b/37913785
Change-Id: I7adb77a913dccf669153b03b31b4a1e1c98d1cb0
- Implemented according to v1.0 spec @ https://www.webmproject.org/vp9/mp4/
- v0 is no longer supported
Change-Id: I189c813d788400beda797eea7da943a83dfa7d79
- Added flag --mp4_include_pssh_in_stream, default to true. If it is
set to false, the encrypted mp4 stream will not include pssh.
- Align BytesOfProtectedData to multiple of 16 bytes for cenc.
- Set TrackHeader flag to kTrackEnabled | kTrackInMovie |
kTrackInPreview
- Move mvex to after trak, required by HLS
- Add cmfc/cmfs compatible brands except for avc3/hev1, where CMAF
requires single initialization switching set which is not supported.
- Set duration to 0 in tkhd, mdhd, mvhd.
Also updated major_brand and compatible brands:
- Set major_brand to isom (iso-bmff media file format) and made dash
a compatible brand
- Replaced compatible brand iso6 with iso8 since we use sthd for text
tracks
Fixes b/36278260
Change-Id: I3cc5dd5aa1621714d517fe02fe3841d19a1a07f6
This is what webm_subsample_encryption flag actually does.
- Fixes the flag not working problem introduced by previous CLs.
- Also mark flag webm_subsample_encryption as deprecated.
Closes#220
Change-Id: I03ff843786572a91c01b8bd346a3ce50b129118f
Also added a few more command line flags for end to end test:
- no-remove_temp_files_after_test: do not remove test artifacts after
test
- encryption_key, encryption_iv: allow injecting encryption key/iv from
command line
Change-Id: I62084790e10fe6a385b90cb96d9515d8436b2a49
- Add EXT-X-MAP tag for init segment.
- Do not set output field on stream descriptor if not specified on
command line. If it's set (internally) then it gets copied to
MediaInfo that gets passed to the manifest generators.
b/36279481
Change-Id: I762c55b255699ec691817dc4806b0dee2f7504b8
- Disable subsample encryption for VP8 in ISO-BMFF
- Apply block alignment to all subsamples for VP9 in ISO-BMFF,
instead of just superframes.
Change-Id: I8dd31cc16e87abc4d538330eaff9acb0509497df
Also moved MediaHandler output validation to Initialize instead.
This CL also addresses #122 with consistent chunking.
Change-Id: I60c0da6d1b33421d7828bcb827d18899e71884ce
- Also sets up the packaging and verify it works.
Some of the changes are temporary to get the integration going.
Change-Id: I0cf6c379d185e157808acabb9ef58ff93d4a39ae
This will move ContentProtection element from Representation
to AdaptationSet.
Shaka Player already supports AdaptationSet switching
urn:mpeg:dash:adaptation-set-switching:2016;
ExoPlayer does not support it yet. Filed
https://github.com/google/ExoPlayer/issues/2431 to track the issue.
(ExoPlayer does not like having ContentProtection in Representation
anyway)
Closes b/34691105
Change-Id: I69d0a4d0e15a912a35c8b2686620419a28e4cc99
- Added two new fields in MpdOptions: dash_profile and mpd_type
- Updated MpdBuilder to support LiveProfile with static mpd
- Command line arguments will be updated in the next CL
Issue #142
Change-Id: Ibd35e5c9e1b1ef98043392e3f04a0af4700135c1
Cues used to be generated in the end of the file; if http range
request is not supported, clients have to download the whole
file to get to the cues.
This CL updated TwoPassSingleSegmentSegmenter to write cues
after writing webm header.
This CL also updates libwebm dependency to latest.
Closes#159
Change-Id: Ic73548e1b872e6b13a37627707e7d0ff3e556877
- Also regenerated test content to insert an iframe every one
second: ffmpeg -i source.webm -auto-alt-ref 1 -g 30 out.webm
This makes sure the content is actually encrypted with one
second clear lead in end to end test.
Change-Id: I488143c148e2d6c45ba1586f6d0d835dc46db86e
Mimic iso-bmff behavior: either all the samples in a segment are encrypted
or all the samples are clear.
Change-Id: I03bdbbf5a4b690f4d87c4dceb0f8155e6fae941e
The right way to detect the presence of a keyframe in a BlockGroup
is to look for the absence of the ReferenceBlock element [1].
Closes b/30433206
[1] https://matroska.org/technical/specs/index.html#ReferenceBlock
Change-Id: I2b3c8704cbabcd5cbee38448e5528425865561a4
- Try to determine container name from segment_template if output is
not specified
- segment_template descriptor is required for TS
- output descriptor should not be specified for TS
- Generate hls_playlist_name from stream number if not specified
- Update packager_test.py to include playlist validation
b/29551186
Change-Id: Ide7169f1c26c85a6e38272dda0e1af77135b4d90
- Tracks other than video are protected using whole-block full-sample
encryption as specified in ISO/IEC 23001-7:2016(E) 9.7, which is
equivalent to a pattern of 1:0. This is different to the non pattern
encryption counterparts.
- Also updated the code to allow the existence of other protection
schemes in the original content, which will simply be ignored.
- The internal cryptor used by AesPatternCryptor should not use
constant iv, add a DCHECK for that.
- Optimize AesPatternCryptor handling on the special pattern 1:0.
Change-Id: Idc704e7bc6b347741336f38c6d3620fc19392960
Aaron Vaage
KongQun Yang
sylt
Haoming Chen
Rintaro Kuroiwa
Thomas Inskip
Jacob Trimble