It is not always possible to align segment duration to target duration
exactly. For example, for AAC with sampling rate of 44100, there are
always 1024 audio frames per sample, so the sample duration is
1024/44100. For a target duration of 2 seconds, the closest segment
duration would be 1.984 or 2.00533.
This feature allows MPD generator to treat these segments as having
the same duration, thus allows MPD generator to generate less
SegmentTimeline entries and potentially no SegmentTimeline entries
(replaced with SegmentTemplate@duration instead if
--segment_template_constant_duration flag is enabled).
Under flag --allow_approximate_segment_timeline. Disabled by default.
Fixes#330.
Change-Id: I5044eaa348ebbf45bf792a2af53fc95a115ae21b
- Allow including Widevine and Common SystemID PSSH boxes
for PlayReadyKeySource.
- --playready_key_id and --playready_key flags are deprecated.
- --enable_raw_key_encryption already supports playready PSSH generation.
Addresses issue #245
Change-Id: I072d4f43a3239875959e4c5b1eb6854415d7367e
Removed the logic in MuxerListener to estimate bandwidth from file
size and duration, since it is not compliant to the spec.
MpdBuilder will estimate bandwidth from segment size and duration
if bandwidth is not specified in MediaInfo.
Here is the statement from DASH spec (23009-1:2014):
Consider a hypothetical constant bitrate channel of
bandwidth with the value of this attribute in bits per second
(bps). Then, if the Representation is continuously delivered
at this bitrate, starting at any SAP that is indicated either by
@startwithsap or by any Segment Index box, a client can
be assured of having enough data for continuous playout
providing playout begins after @minbuffertime *
@bandwidth bits have been received (i.e. at time
@minbuffertime after the first bit is received).
For dependent Representations this value specifies the
bandwidth according to the above definition for the
aggregation of this Representation and all complementary
Representations.
Fixes#376.
Change-Id: I0fddce39e709d0cded0a4c9ae59adbbcc97ec5ea
The file_name fields will be used to solely indicate file paths on the
designated file system, and they are used to do normal file operations,
including file creation, file updating and file removal if needed;
added new xxx_url fields, for the URLs that should appear on DASH
manifest or HLS playlists.
xxx_url are the URIs of the media in the manifest. The fields are
converted from file_name fields but adjusted to be relative to DASH
manifest path or HLS playlist path, optionally with base_url prepended.
Previously the file_name fields are converted in place to indicate
URLs when passing to manifest / playlist builders. The original file
names were lost, which made it difficult to remove files outside of
live window.
Now that the input file names are preserved. File system APIs can
operate on the original file names while manifest / playlist generation
functions can operate on URLs.
Issue: #233
Change-Id: I36a64f16e3d1261ce91783a86588f24ad1371662
According to DASH spec (23009-1:2014):
Consider a hypothetical constant bitrate channel of
bandwidth with the value of this attribute in bits per second
(bps). Then, if the Representation is continuously delivered
at this bitrate, starting at any SAP that is indicated either by
@startwithsap or by any Segment Index box, a client can
be assured of having enough data for continuous playout
providing playout begins after @minbuffertime *
@bandwidth bits have been received (i.e. at time
@minbuffertime after the first bit is received).
For dependent Representations this value specifies the
bandwidth according to the above definition for the
aggregation of this Representation and all complementary
Representations.
This suggests that max bitrate should be used instead of average
bitrate.
Also cleaned up BandwidthEstimator code.
Fixes#376.
Change-Id: Ibf5896394c5c6bb820849771a2129c59202d2273
Two-character ISO-639 code in --default_language was ignored due to
a bug in language code matching as the language code in stream is
always converted to 3-character code.
Fixes#371.
Change-Id: I8618938af583a417446636ff9efe1c72ce822c33
This flag was introduced to workaround a rounding error in Chrome
(probably in other browsers too).
Also although this flag avoids the first frame of a Period to be
dropped due to rounding error but it could cause the last frame of a
Period to be dropped.
Now that we use a high precision Period@duration, we do not expect to
see rounding errors any more. The player would be a better place for
the workaround even if it is still needed.
Related issue: #368.
Change-Id: I3bd517ecc6d548ff62e0c13394edb49d4bc68e8f
Instead, the actual earliest presentation time is used except for
the first segment if there is an offset between presentation time
(pts) and decoding time (dts).
Chrome (as of v66) reports dts instead of pts in buffered ranges in
MSE API. To avoid breaking Chrome, the earliest_presentation_time
of the first segment is set to its dts as Chrome does not like negative
values for
adjusted dts = dts + Period@start (0 for the first period)
- presentationTimeOffset (earliest_presentation_time).
Fixes#303.
Change-Id: I5ca80e05d5570961400499436f2bcc01f06e69e0
UTCTiming schemeIdUri and value pairs can be provided to packager using
--utc_timings flag. It should be comma separated list of
schemeIdUri=value pairs.
Note that urn:mpeg:dash:utc:direct:2014 scheme is not supported as it
requires the MPD to be dynamically generated on the fly when MPD is
served to client.
Fixes#311.
Change-Id: Ibc07af8a6d8b2b6261ba3ecd2c02f23809f96614
Chrome internally uses time accurate to microseconds, which is
implemented per MSE spec (https://www.w3.org/TR/media-source/).
Generate Period@duration with better precision to avoid possible
buffered range gaps in Chrome (possibly other browsers too), which
may lead to other problems like playback stall.
b/74238961
Fixes#368.
Change-Id: I357a0f62b67f75c7ca044bb99ea4e3c8bbb6fecd
Created a media handler to come after parsers that will handle filling
in gaps between text samples. The padder takes a min duration, and if
the samples do not cover the min duration when flushed, one last empty
sample will be injected so that the samples will go up to the min duration.
Change-Id: I88605059664d09279676edac418ff3d4990d7556
It is now managed in SimpleMpdNotifier.
This avoids unnecessary increment in AdaptationSet id counter.
Also makes sure the AdaptationSet is sorted by id in XML output.
Change-Id: Ibcd0b047a71c19cd30ad7d8af9a2ed0bb05e043e
This changes almost all encrypted tests to use DiffDir. The remaining
un-updated tests are tests that won't match every time.
Change-Id: I858bbaa0beea34887cc3100eb784aa2aecd5a0a5
Change MediaInfo media paths in test output to only use the filename so
that they can be compared between test runs.
Change-Id: I26bb3f5ce79a83400b8a162c61cf5b54e41f9c70
iframe playlists will be given a name based on the output name of
the main stream. This is done to ensure unique filenames between
different video output streams.
Change-Id: Id0de9c5834599e9d896243e30569c55f34e7cd68
Instead of using the test file's index in a list to create the output
name, use the original filename and the descriptor.
This caused some problems with file name collisions when some tests
were using the same name. That was fixed by changing the names. This
will go away once they are transitioned to use DiffDir like the other
tests.
Change-Id: I0a4c480406705ca63fcea61c86c67d4a5f739295
This is called when reaching end of the file of the media. The duration
of the media is updated.
Fixes#340.
Change-Id: I446f2d341b02125d4a7d8c958bda269b5403cb9c
Created a method to compare test output for live tests. This wraps
CheckTestResults but first replaces the times that would diff between
manifests.
Change-Id: Iafb51a28a9bcb9f32b210c6d76bf23e2b9a3e0d6
This require a change to the update gold method as it would not
create nested directories. Instead it deletes the old directory
and copies the whole new directory over. This made the code simplier
and far-less error prone.
Change-Id: I1da5d9bda171b0f106d1425b204139dfbcb39b42
To make working with file names easier in packager_test.py _GetStream
the full path is not created until needed so that multiple paths can
use the same root filename.
Change-Id: I23a9231433b22ab5cef9b88bd6359f351da56eda
Changed all output file names (not paths) to follow the pattern that
any qualifier (e.g. trick play) will be join the current name using '-'
but will use '_' within itself (e.g. trick_play_1).
Change-Id: Ib0247bf1ca6d94815fedaaf73d3a400d31c20c40
Prefer timestamps from Video AdaptationSets if available - this avoids
possible video playback jitters due to gaps.
presentationTimeOffset is not applied to the first period as it may in
negative dts which Chrome does not like: https://crbug.com/398141.
It is safe to apply to subsequent periods as the actual offset applied
takes Period@start into consideration:
offset = Period@start - presentationTimeOffset
The result timestamp with offset applied is close to Period@start, so
it is unlikely to result in a negative dts value.
Closes b/73899306.
Change-Id: If8361f5469610093b3aac6675754536ad7e83c4c
This change has the hls master playlist add the text codec string
to the list of codecs in a variant.
Bug: 72942756
Change-Id: Ib25bb2064a291d10d7b1d261a4307991df62220c
Updated as many tests as we easily could. The tests that were not updated
all use live manifests or encryption that all require some "help", either
by dealing with times differing or with verifying decryption.
Bug: 73830478
Change-Id: I6803c2d960b71b459eb57b7a5e562164bb713e2a
Created GetStream, a function used to get the stream descriptor for a
single stream. This allows for finer control over the stream compared
to the batch GetStreams.
Added "trick_play_factor" to GetStream so that the trick play factor
did not have to be added the stream descriptor value and "injected"
into the stream.
Change-Id: Ifbde64b961a673aafa5f6d21f33a68d02fb46610
Created end-to-end tests for the segmented webvtt text in HLS. The
text stream is longer than both audio and video, so there are more
text segments than video/audio.
Change-Id: Ib860ccd3f2ac0048983fdeebe3847a0b9dcbc160
Created a method to diff the output dir against the golden copy
of the output dir. The goal with this is to simplify our end-to-end
test structure by removing the need to track the output files within
the test runner.
With all the golden output in one directory, this makes it easier to
setup end-to-end tests and even allows the golden files to be playable.
This should not affect the repo size too much as duplicate files will
only be stored in the git object store once.
Tests will migrate to this in separate CLs.
Change-Id: Id1be9f8f60c9e362b9b615445dd8ca7da996af4c
Changed the "live" setting in _GetStreams to be "segmented" so that it
make sense in a more general sense.
Change-Id: I2ceaad67653e1e2237533b68fccbc9fe3fabfc9b
Looks like Safari does not like v0 tenc box.
- Use v1 tenc box for cbcs and cens protection_scheme as required by
CENCv3 spec.
- Set crypt_byte_block and skip_byte_block to 0 for full sample
encryption cbcs and cens.
Fixes#326
Change-Id: I5581cd856fffc4ff104d950f3ca19b9337d57a78
Create a StreamDescriptor class that can be used to build the stream
descriptor command line argument.
Change-Id: Ifcba4f37d69a1a36c4add51a2a10c3f0c8b2ccd7
The old vtt sample data has the header as "WEBVTT FILE" which does
not reflect what the spec says it should be.
This changes it to "WEBVTT" as described in the WebVTT spec.
Change-Id: Ib54396a8b937501a835dafe966bf05b95b0b22c4
- Add empty lines between different types of renditions to improve
readability.
- Group variants with the same audio/text group together, as it is
where the Adaptation occurs.
- Write master playlist after writing media playlists. This makes
more sense and it is also necessary to have the bandwidth of
the last iframe playist segment correctly computed.
- For fMP4, I-Frame segment must include the 'moof' header.
- Fix a problem that hls_iframe_playlist_name is not passed to
MuxerListenerFactory.
Issue: #287
Change-Id: Icf37c5de1dc29f85ae3f419cbc3264d04ca491a4
If no hls group name is given, we would default to "audio" but as
we are working to support text, this won't make sense to see
GROUP="audio" on a text stream.
Instead default to "default-audio-group" for audio streams. A specific
text default will be added later.
Bug: #205
Change-Id: Iefc8bfd35708286619d0004348294d98f2c38482
The IV was incorrectly updated across samples.
Created a new cryptor SampleAesEc3Cryptor specially for SAMPLE-AES
EC3 encryption / decryption. The new cryptor uses constant-iv, and
makes sure the IV is reset to the initial value at the beginning
of each audio frame and chained across syncframes within the the
audio frame.
Also added E-AC3 end to end test.
Fixes#279
Change-Id: I0aa60c17836daeef5ba433a05e5ff0906191d9ac
According to HLS spec: https://goo.gl/MiqjNd 4.3.4.1.1. Rendition Groups
- A Group MUST NOT have more than one member with a DEFAULT attribute of
YES.
- Each EXT-X-MEDIA tag with an AUTOSELECT=YES attribute SHOULD have a
combination of LANGUAGE[RFC5646], ASSOC-LANGUAGE, FORCED, and
CHARACTERISTICS attributes that is distinct from those of other
AUTOSELECT=YES members of its Group.
We tag the first rendition with a particular language in an audio group
with 'AUTOSELECT'; it is tagged with 'DEFAULT' too if the language
matches --default_language.
Fixes#315
Change-Id: Iacc0bc8c89ebffce8717fa65e82d6daf5a1f6adc
To remove the direct dependencies between packager.cc and the different
muxer implementations, this change remove the muxer factory to its
own file.
Change-Id: I4a1503c493f0f4d10a67e78461f96da3f4238944
- Add --time_shift_buffer_depth to HLS doc.
- Fix a problem in HLS tutorial
Partially address #304, fixes#305
Change-Id: I60bc1eb659a30beb0a6ab73433f4cc99a7deab07
Moved all code dealing with jobs into its own class so that the
packager code does not need to worry about initializing, running,
or stopping jobs.
Change-Id: I3e9ef1f22bd93d671f77d59ad15f23d1239078cf
As specified in HLS spec (https://tools.ietf.org/html/rfc8216):
All audio EXT-X-MEDIA tags SHOULD have a CHANNELS attribute. If a
Master Playlist contains two Renditions encoded with the same
codec but a different number of channels, then the CHANNELS
attribute is REQUIRED; otherwise, it is OPTIONAL.
Fixes#299
Change-Id: Ic2308c39b170178b11cb0d94c3a8083c8b5f3353
The keys can be specified in --keys option, with the form of
label=<label>:key_id=<32-digit hex string>:key=<32-digit hex string>,label=...
There can be multiple "label=..." block. The DRM label can be one
of "AUDIO, SD, HD, UHD1, UHD2" or a custom label.
Mark --key and --key_id as deprecated. We can achieve the same result
with --keys=label=:key_id=<key_id>:key=<key>.
Also add a new optional field in stream descriptor: drm_label, which
is used to overwrite the internally generated DRM label for the stream.
If not provided, the DRM label is generated automatically based on
audio/video information, e.g. resolution.
Code changes:
- Merged RawKeyEncryptionParams and RawKeyDecryptionParams into
RawKeyParams.
- Make FixedKeySource accepts RawKeyParams as input.
Change-Id: Ic8c2f071cc71188e13f14bc6396fc2b3ffa5cac6
This fixes shared_library not able to compile problem.
Also removed StreamDescriptorList and replaced with expicit
comparison to make the code clearer.
Also removed an out-dated DCHECK that mpd_notifier and hls_notifier
does not co-exist.
Change-Id: I3d04b8880741fecf0931a764cc12e50aa5e392b9
Before the trick play handler would have one input and multiple
outputs. The normal media handler API for adding handlers had to
be ignored when setting-up the trick play handler.
This changes the trick play handler to have one input and one output.
It uses the standard AddHandler method calls. When initialized, the
trick play factor must be provided.
This included a run of 'clang-format' over all edited files.
Change-Id: I7b3cdf0a2472e2f89ab194867c4b984e26f18f24
Moved build instructions and docker instructions to separate docs.
Removed command samples which are no longer needed as we have better
tutorials now.
Change-Id: I340c5653a6553158325970dd86d76fa11e69bcbd
- Remove the TS key rotation not supported check as there is nothing
to be done for key rotation in TS for SAMPLE-AES.
- Fix IV updated problem in new segments even if crypto period does
not change.
- Avoid duplicate EXT-X-KEY tags if it does not change.
- Make EXT-X-DISCONTINUITY-SEQUENCE match with number of removed
EXT-X-DISCONTINUITY.
- Added end to end test for HLS with key rotation.
Change-Id: I73cb82e9f5575fcdf63ee643228efe78e6766302
The HLS manifests output by the packager did not have the RESOLUTION
attribute on EXT-X-STREAM-INF tags. This change adds the resolution
tag when resolution values are present.
Close#235
Change-Id: I15ca6de47cb34793cf6a940123d593261627baa4
Shared libpackager can be built by setting libpackager_type to
shared_library, e.g.
GYP_DEFINES='libpackager_type=shared_library' gclient runhooks
ninja -C out/Debug
will generate libpackager.so in out/Debug/lib directory.
Here is a few other changes to make shared_library builds and
tests pass:
- Add several test parameters to packager.h, which is needed for
testing.
- Create a protoc.gypi from build/protoc.gypi but depending on
protobuf_full_do_not_use instead of protobuf_lite, since we need
protobuf_full_do_not_use for text parsing and generation of media
info proto. Somehow shared_library build does not allow mixed use
of protobuf_full_do_not_use and protobuf_lite.
- Remove the use of LazyInstance in version/version.cc and use static
variable directly. This is because LazyInstance needs AtExitManager
which may not be easy to setup when calling GetVersion.
- Allow skipping testPackageWvmInputWithoutStrippingParameterSetNalus
with flag --shared_library, which is needed as shared_library build
does not support --strip_parameter_set_nalus flag yet.
Fixes#227
Change-Id: Iff05a50baa28134faa7218664c96114cb9e70329
'availability_time_offset' is not an attribute in MPD specification,
but used to calculate availability_start_time to adjust segment
availability time. A similar effect can be achieved with standard
blessed suggested_presentation_delay flag.
If suggested_presentation_delay is not set, player is expected to
choose a suitable value.
Change-Id: I1d540bd4347b4f04b6cc5ec0778e1a5392009b09
Widevine license server added support for protection_schemes recently;
If CENC request includes protection_scheme in the CENC request, server
will return with a PSSH with protection_scheme filled in.
Change-Id: I6dcac498b5e039503d6ac0f6e057737f7c53efaf
This addresses playready broken with clear lead = 0.
clear lead != 0 is still broken with playready on Edge. We think it is
likely an Edge bug, which does not support multiple sample entry boxes,
thus does not support clear lead.
b/37913785
Change-Id: I7adb77a913dccf669153b03b31b4a1e1c98d1cb0
- Implemented according to v1.0 spec @ https://www.webmproject.org/vp9/mp4/
- v0 is no longer supported
Change-Id: I189c813d788400beda797eea7da943a83dfa7d79
- Added flag --mp4_include_pssh_in_stream, default to true. If it is
set to false, the encrypted mp4 stream will not include pssh.
- Align BytesOfProtectedData to multiple of 16 bytes for cenc.
- Set TrackHeader flag to kTrackEnabled | kTrackInMovie |
kTrackInPreview
- Move mvex to after trak, required by HLS
- Add cmfc/cmfs compatible brands except for avc3/hev1, where CMAF
requires single initialization switching set which is not supported.
- Set duration to 0 in tkhd, mdhd, mvhd.
Also updated major_brand and compatible brands:
- Set major_brand to isom (iso-bmff media file format) and made dash
a compatible brand
- Replaced compatible brand iso6 with iso8 since we use sthd for text
tracks
Fixes b/36278260
Change-Id: I3cc5dd5aa1621714d517fe02fe3841d19a1a07f6
- Also fix the misleading error if an invalid input is provided
The command line app now correctly reports that the file is not
found instead of stream not available.
Change-Id: I8cfccb62d7a50de57766666f126cf061e3df5ded
This is what webm_subsample_encryption flag actually does.
- Fixes the flag not working problem introduced by previous CLs.
- Also mark flag webm_subsample_encryption as deprecated.
Closes#220
Change-Id: I03ff843786572a91c01b8bd346a3ce50b129118f
Also added a few more command line flags for end to end test:
- no-remove_temp_files_after_test: do not remove test artifacts after
test
- encryption_key, encryption_iv: allow injecting encryption key/iv from
command line
Change-Id: I62084790e10fe6a385b90cb96d9515d8436b2a49
- Add EXT-X-MAP tag for init segment.
- Do not set output field on stream descriptor if not specified on
command line. If it's set (internally) then it gets copied to
MediaInfo that gets passed to the manifest generators.
b/36279481
Change-Id: I762c55b255699ec691817dc4806b0dee2f7504b8
- Disable subsample encryption for VP8 in ISO-BMFF
- Apply block alignment to all subsamples for VP9 in ISO-BMFF,
instead of just superframes.
Change-Id: I8dd31cc16e87abc4d538330eaff9acb0509497df
Also moved MediaHandler output validation to Initialize instead.
This CL also addresses #122 with consistent chunking.
Change-Id: I60c0da6d1b33421d7828bcb827d18899e71884ce
Before this, HLS output did not contain language information.
Now, media playlists are properly tagged with a language in the
master playlist.
b/36134267
Change-Id: I172e946dbedd096a44cb2f917b007cc004756228
- Also sets up the packaging and verify it works.
Some of the changes are temporary to get the integration going.
Change-Id: I0cf6c379d185e157808acabb9ef58ff93d4a39ae
This will move ContentProtection element from Representation
to AdaptationSet.
Shaka Player already supports AdaptationSet switching
urn:mpeg:dash:adaptation-set-switching:2016;
ExoPlayer does not support it yet. Filed
https://github.com/google/ExoPlayer/issues/2431 to track the issue.
(ExoPlayer does not like having ContentProtection in Representation
anyway)
Closes b/34691105
Change-Id: I69d0a4d0e15a912a35c8b2686620419a28e4cc99
- Deprecated command line flags --profile and --single_segment.
'segment_template' in stream descriptors implies live profile
and non-single segment.
- Added flag --generate_static_mpd_for_live_profile to generate
static mpd for live profile; if not set, dynamic mpd will be
generated.
Close#142
Change-Id: I78879297ed118f0f246c4753a16ad125bd6b5e4f
- Added two new fields in MpdOptions: dash_profile and mpd_type
- Updated MpdBuilder to support LiveProfile with static mpd
- Command line arguments will be updated in the next CL
Issue #142
Change-Id: Ibd35e5c9e1b1ef98043392e3f04a0af4700135c1
Current mechanism of using AdaptationSet @group is not spec compliant.
The spec compliant mechanism is to use supplemental descriptor with
schemeIdUri: urn:mpeg:dash:adaptation-set-switching:2016 as specified
in ISO/IEC 23009-1:2014/Amd.4:2016.
Fixes#156
Change-Id: I4d97648547a23315ba9c09dcadb14e18c99a45fc
Three options are supported right now:
- reuse=1|0
Allow or disallow reusing UDP sockets. Default 0.
- interface=a.b.c.d
Address of the interface over which to receive UDP multicast
streams.
- timeout=microseconds
Timeout in microseconds. Default to unlimited.
A UDP url should be of the form udp://ip:port[?options], here
is an example:
udp://224.1.2.30:88?reuse=1&interface=10.11.12.13&timeout=12345
Also deprecate --udp_interface_address flag in favor udp options.
Closes#133
Change-Id: I962d35bfedc1779d67ba20ed910207c66b7c1a15
Cues used to be generated in the end of the file; if http range
request is not supported, clients have to download the whole
file to get to the cues.
This CL updated TwoPassSingleSegmentSegmenter to write cues
after writing webm header.
This CL also updates libwebm dependency to latest.
Closes#159
Change-Id: Ic73548e1b872e6b13a37627707e7d0ff3e556877
Setting this flag will tag any matching tracks with kRoleMain.
The player will then know which tracks should be default when there
is not a language match.
Closes#155
Change-Id: I827304c49e345d07b1e76f7a46421b60f228f0ba
Language tags can have subtags, such as "por-BR". While the base tag
should be 3 characters, the entire tag can be longer. Rather than
parse out the base tag and check that it is size 3 without the subtag,
we can just trust the ISO tag converter to do the right thing.
Change-Id: I2a186b5c8db0f373ee82ef68245ecc33cb068581
- Also regenerated test content to insert an iframe every one
second: ffmpeg -i source.webm -auto-alt-ref 1 -g 30 out.webm
This makes sure the content is actually encrypted with one
second clear lead in end to end test.
Change-Id: I488143c148e2d6c45ba1586f6d0d835dc46db86e
1. Replace STLDeleter with unique_ptr in container, which is
supported in C++11
2. Replace string_as_array with &string[0] which is guaranteed
to work in C++11
Change-Id: I7f39c0e51fc8a3fcbb41313094a0ca6b33db7bf3
The current behavior of logging to a file in the same directory
as the binary will break if the binary does not have write access
to that directory.
Fixes Issue #139
Change-Id: I11adfaec676fc9bbef2a5caa3261889d1fba3b88
Mimic iso-bmff behavior: either all the samples in a segment are encrypted
or all the samples are clear.
Change-Id: I03bdbbf5a4b690f4d87c4dceb0f8155e6fae941e
The right way to detect the presence of a keyframe in a BlockGroup
is to look for the absence of the ReferenceBlock element [1].
Closes b/30433206
[1] https://matroska.org/technical/specs/index.html#ReferenceBlock
Change-Id: I2b3c8704cbabcd5cbee38448e5528425865561a4
Also updated packager_test not to fill in output_format by default,
which will help catch these kinds of bugs.
Closes#130
Change-Id: I77157317de822d3f543f7e27d94bb4df7a1649d2
This flag is needed to workaround the Chromium bug
https://crbug.com/398130, which uses decoding timestamp
in buffered range.
Closes#113
Change-Id: Ib8f18be7165dd968bdc36c18ce29f694235c0c26
- Try to determine container name from segment_template if output is
not specified
- segment_template descriptor is required for TS
- output descriptor should not be specified for TS
- Generate hls_playlist_name from stream number if not specified
- Update packager_test.py to include playlist validation
b/29551186
Change-Id: Ide7169f1c26c85a6e38272dda0e1af77135b4d90
- Add flags and stream descriptor fields for HLS.
- Remove fields from MuxerOptions. Instead pass them directly to
HlsNotifyMuxerListener.
- Rebase segment names to the master playlist's path where it makes
sense.
Change-Id: If4f54bc56ff46dc6140859a79ed66f7b99112ed7
- Tracks other than video are protected using whole-block full-sample
encryption as specified in ISO/IEC 23001-7:2016(E) 9.7, which is
equivalent to a pattern of 1:0. This is different to the non pattern
encryption counterparts.
- Also updated the code to allow the existence of other protection
schemes in the original content, which will simply be ignored.
- The internal cryptor used by AesPatternCryptor should not use
constant iv, add a DCHECK for that.
- Optimize AesPatternCryptor handling on the special pattern 1:0.
Change-Id: Idc704e7bc6b347741336f38c6d3620fc19392960
- For encrypted segments, PMT specified by SAMPLE-AES specification is
generated.
- Remove time_scale_ field from TsWriter. It is not used.
- Move ContinuityCounter to a separate file.
- Add ProgramMapTableWriter and implementations.
- continuity_counter is incremented for PAT and PMT.
Change-Id: If0dd0990203cb6990f39a6832048bdc3ff08decd
- BytesOfProtectedData in 'cens' SHALL also be 16-byte aligned
- Fix an incorrect box definition bug w.r.t to 'cbcs' and 'cens'
- Also add various protection scheme tests
Close#77Close#78
Change-Id: I63c8d8b01ce16ed60affa97ec95fc62bc2da06df
- Disallow packager_test.py to be executed from source directory
- Remove the building of packager target from packager_test.py. User
need to make sure packager builds successfully before running
the test.
- Remove build_type parameter which is no longer needed
Change-Id: I479d3c39b8d45730e5388d194069f1320fa5cd75
- CBC cryptors should accept IV of size 8 bytes - it will be zero
extended to 16 bytes.
- Fixed iv() not updated problem in AesPatternCryptor.
- Replace kChainAcrossCalls with ConstantIvFlag enum flags.
Change-Id: I3fb4de0e8abbe891e6271e779373ba53f8df660d
- Remove EncryptionMode enums
- Remove AesEncryptor::InitializeWithRandomIv, replaced with
a static function AesCryptor::GenerateRandomIv, which should
be called to generate the iv if the iv is empty.
This change is to prepare support for CBCS and CENS pattern-based
protection schemes.
Issue #77
Change-Id: Icba35089d6e451cbea7ebbf5dd5674079f206390
The positions in the SeekHead element should be relative to the
Segment payload, not the start of the file. Also added entries for
Tracks and SegmentInfo.
Change-Id: Id692da25fffc27d78e9f1a06d061431aeb6f1e7c
- Optimize and clean up encryption and decryption code.
- Consolidate various CBC encryption/decryption schemes into a
common class.
- Make it a constructor argument whether cipher block chain is
continuous across Encrypt/Decrypt calls.
- Also align protected region size as required in CENC spec.
Issue #77
Change-Id: I533d92ada3cd80933b532b9c3a1cca105ba66f8e
This adds a preliminary H.265 parser. The parser only support
reading the slice header. This also attaches the H.265 parser to the
VideoSliceHeaderReader so H.265 frames can have unencrypted headers.
Issue #46Closes#40
Change-Id: I8b98e1f8bb04e359d9bf896fd5b2939c326b196b
The flag --include_common_pssh will add another PSSH box in addition
to the Widevine one which will contain the key IDs of all the keys.
Closes#88
Change-Id: Ic719b19747530f0e4856cfb36471a644d572a734
- Use 'builddir_name' environment variable to create the output
path in test_env.py
- This allows running the packager test with different build
configs because it doesn't use 'out', e.g. it could use 'out_clang'
for clang builds.
Change-Id: I843343ec8e2d0a64dffbab2fdbd38aead5c97718
The new algorithm will parse NAL unit header and only starts a new
NAL unit if it is valid, otherwise it will be considered part of
the previous NAL unit.
Closes#96
Change-Id: I45f2a0f37d51841ee8345d6d0d38fcda57e0a009
KeySource is now an abstract class that is implemented in two
types WidevineKeySource and FixedKeySource. This also updates
fixed key encryption to use v1 PSSH boxes with the common system
ID.
This also updates the --pssh argument. Now it accepts full PSSH
boxes rather than data. Multiple PSSH boxes can be concatenated
together.
Issue #88
Change-Id: I4bd0290f6d8b965f7d118f075c96e0f267d7e831
- Part 1.
- Add packager command line argument "protection_scheme" to specify
protection scheme. Plumb through packager code to enable CBC
encryption/decryption.
- Add scheme type "cbc1" to sinf.
- Refactor AES encryptor and decryptor.
- Need more work in the subsample handling.
Issue #77
Change-Id: I3a9304d89adf5efbfb226b6e805a3077b6cb8c68
* EncryptionKey now contains them rather than a PSSH box.
* Outputs PSSH boxes for each entry.
* Outputs a ContentProtection element for each entry.
* Removed SystemName and UUID from KeySource.
* Removed --scheme_id_uri packager argument.
Issue #88
Change-Id: I2651784c3220fd64f5b1773fdcd70285690cf8c0
This is needed to test encryption in end to end test since the video
is segmented in gop boundary by default. Due to the existence of clear
lead, the first segment is always left in clear.
Change-Id: Ie8d37a1740f9061515298cb9fb7b58983592cc5b
For non-video slices, the data is not encrypted. This also skips the
frame headers for H.264; support for H.265 will be added later.
Issue #40
Change-Id: Id0cb0fb9ddb6adedf63ef4aef6b3a26260a21654
This also changes the way frames are written in the WebM muxer. Now,
frames are stored and written on the next call to AddSample. So each
call to AddSample will write the previous frame. This is needed to
determine whether the given frame is the last one in the cluster.
Closes#70
Change-Id: Ic69ebad3c4729cdaa2017c9c7f497048501ac907
Now outputs cenc:default_KID attributes on all ContentProtection
elements for non-MP4 streams. For MP4 streams, it will still output
the default ContentProtection element.
Closes#69
Change-Id: I38b24297aa3c2ccbcbde38b44279b56c37a388f7
- dts was not set earlier, although for WebM, we could assume that
dts is the same as pts.
- Calculate block duration with the difference with the next block
if duration is not encoded, even if track default_duration is set.
- Use track default_duration as a duration estimate for the last
block.
- This also removes opus duration computation from encoded data.
Issues #67, #68
Change-Id: Icaa2769dcb2a89269ae014f44ad6a9262770aed2
- From DASH spec 2014, MPD@publishTime and Period@id are required for
'dynamic' MPD.
- Period@id is always set to "0".
- MPD@publishTime is set to the time when the MPD is output.
Issue #55
Change-Id: I5e50aa11067176e69a2343fbc82ca42129703e1b
Added packager tests for WebM audio. Also now only outputs the
language if it's not empty. Fixed the packager tests for that.
b/26540606
Change-Id: Ica804bd710055bcaa2113f948d723dedd78ef909
- @width, @height, @frameRate for Representation element will not be
set if the attributes are set at AdaptationSet level.
Issue #55
Change-Id: Ib4e669142874f9e8f0ca773df9f87a3fef01b729
KongQun Yang
Aaron Vaage
Haoming Chen
Michael Stillwell
Kamesh Devarakonda
Joey Parrish
Yohann Connell
sylt
Rintaro Kuroiwa
Kyle Alexander
Thomas Inskip
Jacob Trimble
Bei Li