This converts all time parameters to signed, finishing a cleanup that
was started in 2018 in b4256bf0. This changes the type of:
- timestamps
- PTS specifically
- timestamp offsets
- timescales
- durations
This excludes:
- MP4 box definitions
- DTS specifically
This is meant to address signed/unsigned conversion issues on arm64
that caused some test cases to fail.
Change-Id: Ic752a20cbc6e31fea6bc0894d1771833171e7cbe
This also allows setting the language of different text streams from
the same input. Multiple streams can use the same input stream
using different cc_index values and can each use a different language.
This also will try to pull the language from the input if not
specified.
Change-Id: I7078710b509b7d77dad8cb4299a82f954af7e9e7
Note that this only supports a single page within the DVB-sub stream.
Multiple pages will be merged together. A follow-up will allow
selecting a specific page.
This only supports outputting using TTML or MP4+TTML; you cannot have
DVB-sub output nor can you output it in WebVTT. Since DVB-sub
uses images, it is hard to impossible to do this with WebVTT.
This also only supports interlaced images, not progressive images
nor text.
Closes#832
Change-Id: Id6dbb6393c7b9a05722e61c6bd255bef5e69a7d8
Issue #149
Co-authored-by: Andreas Motl <andreas.motl@elmyra.de>
Co-authored-by: Rintaro Kuroiwa <rkuroiwa@google.com>
Co-authored-by: Ole Andre Birkedal <o.birkedal@sportradar.com>
This also changes the callbacks a bit to (a) avoid passing references
for already ref-counted types, and (b) don't pass PID since the
parent knows this and gives it to the child parser.
Issue #832
Change-Id: I7dd44436c8d1ad81d42a813d16f850175b85ad1a
This adds a new path when parsing MPEG2-TS streams to ignore unsupported
streams. This allows extracting supported streams when some of the
streams are unsupported. For example, you can extract audio from a
file that has unsupported video.
Change-Id: I608fcb19d0a573bfd35e9272f60b0b69346ae11a
Now text-based WebVTT also uses the generic media pipeline. This
converts the WebVttTextOutputHandler to a WebVttMuxer to be more
consistent with the other muxer types.
This also allows choosing between single-segment text and multi-segment.
Before, we would generate both and use single-segment for DASH and
multi-segment for HLS; but now you can choose between either and either
are supported in both DASH and HLS.
Change-Id: I6f7edda09e01b5f40e819290d3fe6e88677018d9
In addition to the MediaSample handling of the MediaParser, this now
adds callbacks for TextSample. This allows reading text streams from
the media files.
Change-Id: I6c00e286e98bc9aafe05b99cf2f7ce6f89d167a9
- Parse and extract transfer_characteristics from H264/H265 VUI
parameters.
- Set VIDEO-RANGE attribute in HLS according to HLS specification:
https://tools.ietf.org/html/draft-pantos-hls-rfc8216bis-02#section-4.4.4.2
- Also added an end to end test.
Fixes#632.
Change-Id: Iadf557d967b42ade321fb0b152e8e7b64fe9ff3e
Latest version of FFmpeg encodes non standard channel layout, e.g. 5.1(side), in AAC using PCE.
This is now supported with the below changes:
- Allow channel_configuration in ADTS header to be 0, as the cctual channel layout is specified
in PCE.
- Add GetFrameSizeWithoutParsing to determine the frame size before actually parsing the frame.
- Skip and resume later if not the whole frame is available.
- Also ensure that the next frame starts with a proper sync word.
Fixes#598.
VLC seems to generate access units with extra AUDs. In #526, the below
sequence is seen:
AUD | SPS | PPS | SPS | PPS | AUD | SEI | SEI | SEI | IDR_SLICE
Previously we exit early when seeing AUD, which results in delayed
processing of the access unit.
The behavior is changed to continue processing the following NAL units
to workaround the content issue.
Closes#526.
Change-Id: I80f571c0711c6db1337eb393fce36fae5432b6c5
kFrameSizeCodeTable rows are ordered by 32kHz, 44.1kHz and 48kHz,
which is the reverse of fscod (48kHz, 44.1kHz and 32kHz).
Also updated unittests.
Fixes#487.
Change-Id: Icb0afb8bb895afde0028eee05b403bc85bf7b538
Negative duration is not allowed, so set the duration of that sample to
an arbitrary small value in case it is needed to decode future samples.
Issue #451.
Change-Id: I9250d71d163f769ea2657d56e108b6dbd583de67
Configurable with --transport_stream_offset_ms.
This is needed to compensate for possible negative timestamps in
inputs, which could happen on ISO-BMFF with EditLists.
Issue #112.
Change-Id: I0fce8766c9df2911b9bb859c1e54052a8ed2abfb
Seeing some failures on some platforms when compiled with clang
disabled:
GYP_DEFINES="clang=0" gclient runhooks
Several changes to make it work:
1. Mark packager code with packager_code=1 in GYP definitions.
2. Disable a few checks in non-packager code, which we do not have
direct control: dangling-else, deprecated-declarations,
unused-function
3. Fix the relevant errors in packager code.
4. Revert HAVE_STROPTS_H in curl config which is not available in
all linux distributions.
Fixes#286Fixes#293
Change-Id: I729b41f99403c5ad9487c6cc4a7dc06f6323cef8
The error is logged only once to avoid log spamming.
Added definitions for the unsupported stream types for easy look up.
Change-Id: I097e2f05759bc84ef03f264cfabd2fb20da7c711
Implemented E-AC3 MPEG-2 Stream Encryption Format for HTTP Live
Streaming specified in https://goo.gl/1sgcwY
Issue #279
Change-Id: I36c1a05e3d0529ff810eaf52bdca45414baa93eb
Audio samples per frame for AC3 was not specified correctly earlier.
Also the number of channels is not correct if LFE channel is on.
Issue #165
Change-Id: Ibf20aa4c7aec43c07ec7cd394d631c537cb387dd
Implemented MPEG-2 Stream Encryption Format for HTTP Live Streaming
specified in https://goo.gl/N7Tvqi.
This change also moved ProgramMapTableWriter creation from TsWriter
to TsSegment.
Issue #165
Change-Id: Ia89dd16a5e6405706dd3d85ec6b6de580f7b13a7
In prep for changes to Trick Play, we want to make all messages
copy on write so that if the same message is sent to multiple
handlers, it is not possible for one handler to change the data
another handler is using.
Change-Id: I554166ca11c532412e4dfced5603972ca24dc2bb
Derive file size from media ranges instead.
Also fix subsegment range reporting for WebM (internal variable,
no output affected).
Change-Id: I5f8152dff4c2cd5fbae5550992b86a669e278f7b
- Changed OnMediaEnd() to take (sub)segment ranges.
- Define a structure to pass the ranges.
- This requires muxers to "cache" the segment ranges but in most cases,
they already do it, e.g. 'sidx' for mp4.
Change-Id: I16b974c1f0f54ca658cc6dbe605efff84a3f52eb
- Remove the TS key rotation not supported check as there is nothing
to be done for key rotation in TS for SAMPLE-AES.
- Fix IV updated problem in new segments even if crypto period does
not change.
- Avoid duplicate EXT-X-KEY tags if it does not change.
- Make EXT-X-DISCONTINUITY-SEQUENCE match with number of removed
EXT-X-DISCONTINUITY.
- Added end to end test for HLS with key rotation.
Change-Id: I73cb82e9f5575fcdf63ee643228efe78e6766302
Joey Parrish
Daniel Cantarín
Jacob Trimble
JPeMu
Ole Andre Birkedal
koln67
sr90
Zajcev Evgeny
KongQun Yang
Phillip Baxter
Tomohiro IKEDA
Haoming Chen
Aaron Vaage
Rintaro Kuroiwa
Haoming Chen