Support Dolby Vision profile 8.1, 8.2, 8.4, 10.1, 10.4 signaling in HLS
and DASH.
Adds new option `--use_dovi_supplemental_codecs` (off by default) to use
SUPPLEMENTAL-CODECS in HLS and `scte214:supplementalCodecs` and
`scte214:supplementalProfiles` for DASH.
To maintain compatibility with existing players the current behavior of
using two entries in the manifest remains the default. This will be
changed in a future version where `use_dovi_supplemental_codecs` will
become on by default.
Adds Dolby Vision compatible brands, 'db1p', 'db2g', 'db4g', 'db4h',
'dby1' based on https://mp4ra.org/#/brands
---------
Co-authored-by: Xingzhao Yun <xyun@dolby.com>
Set the start number in representation to the segment index that is sent by muxer.
With this enhancement, you can now specify the initial sequence number
to be used on the generated segments when calling the packager.
With the old implementation, it was always starting with "1".
---------
Co-authored-by: Cosmin Stejerean <cstejerean@meta.com>
Fixes#1356 which was caused by the fix in #1281 which updated this to
use the correct FairPlay system ID. However since old versions
recognized the previous system ID this restores support for it to avoid
breaking clients.
adds an optional `--hls_start_time_offset` parameter, that, when
used, adds `EXT-X-START` tags to the HLS media playlists.
The EXT-X-START tag allows to specify the location where the player
starts playing, either from start (positive value) or from end (negative
value).
This is especially useful in case of livestreams where this tag can be
used to set the target latency of the playback.
Reference: https://datatracker.ietf.org/doc/html/rfc8216#section-4.3.5.2
The RFC says, that the `EXT-X-START` tag could also be added to the
master playlist, but my tests have shown that most players only respect
it when it's in the media playlists.
Fixes#970
---------
Co-authored-by: Joey Parrish <joeyparrish@google.com>
This will force the muxer to order streams in the order given on the
command-line.
Closes#560Closes#1280Closes#1313
---------
Co-authored-by: Joey Parrish <joeyparrish@users.noreply.github.com>
Co-authored-by: Cosmin Stejerean <cstejerean@meta.com>
This work was done over ~80 individual commits in the `cmake` branch,
which are now being merged back into `main`. As a roll-up commit, it is
too big to be reviewable, but each change was reviewed individually in
context of the `cmake` branch. After this, the `cmake` branch will be
renamed `cmake-porting-history` and preserved.
---------
Co-authored-by: Geoff Jukes <geoffjukes@users.noreply.github.com>
Co-authored-by: Bartek Zdanowski <bartek.zdanowski@gmail.com>
Co-authored-by: Carlos Bentzen <cadubentzen@gmail.com>
Co-authored-by: Dennis E. Mungai <2356871+Brainiarc7@users.noreply.github.com>
Co-authored-by: Cosmin Stejerean <cstejerean@gmail.com>
Co-authored-by: Carlos Bentzen <carlos.bentzen@bitmovin.com>
Co-authored-by: Cosmin Stejerean <cstejerean@meta.com>
Co-authored-by: Cosmin Stejerean <cosmin@offbytwo.com>
CC version 13 needs `<cstdint>` to be explicitly included to
provide fixed bits integer types.
Some files using it inludes `<stdint.h>`, some are missing direct or
undirect inclusion. This PR adds `<cstdint>` inclusion to the
minimal set of files, allowing compilation on GCC 13.
Closes#1305
It appears that not all Apple implementations follow the HLS guidelines.
While the DEFAULT=NO for an audio track should be optional and default
to NO, in practice native HLS players Safari and iOS devices treat the
missing DEFAULT as a MAYBE.
Fixes#1169
This converts all time parameters to signed, finishing a cleanup that
was started in 2018 in b4256bf0. This changes the type of:
- timestamps
- PTS specifically
- timestamp offsets
- timescales
- durations
This excludes:
- MP4 box definitions
- DTS specifically
This is meant to address signed/unsigned conversion issues on arm64
that caused some test cases to fail.
Change-Id: Ic752a20cbc6e31fea6bc0894d1771833171e7cbe
Always set AUTOSELECT=YES for DVS tracks and also exclude it from
standard AUTOSELECT and DEFAULT configuration logic.
Fixes#857.
Change-Id: Ie179d02390ff09f6e8c0b54892c1d6d32a3c38d6
Now text-based WebVTT also uses the generic media pipeline. This
converts the WebVttTextOutputHandler to a WebVttMuxer to be more
consistent with the other muxer types.
This also allows choosing between single-segment text and multi-segment.
Before, we would generate both and use single-segment for DASH and
multi-segment for HLS; but now you can choose between either and either
are supported in both DASH and HLS.
Change-Id: I6f7edda09e01b5f40e819290d3fe6e88677018d9
HLS uses the EXT-X-MEDIA-SEQUENCE tag at the start of a live playlist in
order to specify the first segment sequence number. This is because any
live playlist have a limited number of segments, and they also keep
updating with new segments while removing old ones. When a player refreshes
the playlist, this information is important for keeping track of segments
positions.
When the packager starts, it naturally starts this count from zero. However,
there are many situations where the packager may be restarted, without this
meaning starting this value from zero (but continuing a previous sequence).
The most common situations are problems in the encoder feeding the packager.
With those cases in mind, this parameter allows to set the initial
EXT-X-MEDIA-SEQUENCE value. This way, it's possible to continue the sequence
number from previous packager run.
Closes#691.
Although FRAME-RATE is optional per HLS specification, but per HLS
Authoring Specification for Apple Devices (https://apple.co/30n90DC):
Each EXT-X-STREAM-INF tag MUST have a FRAME-RATE attribute.
Also, iOS and TVos refuse to play the content if VIDEO-RANGE is
present but FRAME-RATE is missing.
Issue #632, #634.
Change-Id: Ica282f023a7e8538f7b506094e2286840cf5c193
Calculate FRAME-RATE from sample duration as in the DASH solution.
Right now calculated frame-rate may not be accurate in some scenarios,
so we avoid setting the attribute in HLS unless it is more than 30
fps. We will set it unconditionally once it is fixed.
Fixes#634.
Change-Id: I87b6e9a047d959ae88dd4dcb2b4786527ba5c9fc
- Parse and extract transfer_characteristics from H264/H265 VUI
parameters.
- Set VIDEO-RANGE attribute in HLS according to HLS specification:
https://tools.ietf.org/html/draft-pantos-hls-rfc8216bis-02#section-4.4.4.2
- Also added an end to end test.
Fixes#632.
Change-Id: Iadf557d967b42ade321fb0b152e8e7b64fe9ff3e
Store and use the segment start time in the original time scale to
delete old segments, instead of storing it in seconds, as the segment
file name is generated using the time with the time scale.
Fixes#625.
Change-Id: I7524d597b1ffc081dd1399d6fb3ea47c13502881
We used to use the target segment duration provided by the user.
Unfortunately that does not work for iframe only playlist which
the target duration is effectively equal to the GOP duration.
In the new approach, we estimate the target duration from the initial
few blocks (10 blocks right now).
Fixes#610.
Change-Id: Ie8bf943e157149ca7ed3b9382fe0a1088d0774e2
And also dvhe with dvh1.
Apple's specification does not recommend video formats with the
parameter sets stored in the samples.
It also fails mediastreamvalidator checks and some Apple devices /
platforms refused to play.
See https://apple.co/30n90DC 1.10.
Replaced with the corresponding formats with the parameter sets stored
in the sample descriptions instead.
Fixes#587.
Change-Id: Ic5d3f6fde115b1d09d1dcac32cef5fe0ad246aa0
Segment start,end time was used previously, which could result in
problems if there are discontinuity in the streams. E.g. if the
stream has timestamp, 10000, 10001, 10002 and then next segment
comes in with timestamp 1. With the previous logic, all the segments
would remain in the time shift buffer until after 10000 segments
even with a small time shift buffer depth of 10.
This could also happen when timestamp wraps around, which could
happen during long time of live streaming.
This change will also be useful to support multi-period live DASH.
Fixes#563.
Change-Id: Ie078d76c6e4af13ade9ad46191c8e3529069ed4d
The file deletion could fail if it is still held by the web server.
This CL adds retry logic to retry the deletion.
Closes#533.
Change-Id: Ib42ed8db11f32897a29e3b58c1be89d05f5dd034
Generate an audio only master playlist if there are no videos and
subtitles.
We do not support mixing audio only EXT-X-STREAM-INF with video
EXT-X-STREAM-INF right now.
Fixes#461.
Change-Id: I999b335ad7abbe183ffcb0f5d471948977c2772f
It allows users to override the default language for text tracks.
If not specified, --default_language applies to both audio and text
tracks.
Issue #430.
Change-Id: I86a9baba2072be27b6661fa7b65a8bc8b6adb3cc
Add hls_characteristics stream descriptor, which is a colon or semi-colon
separated list of strings. It is optional.
Fixes#430.
Change-Id: Ifcf79316e68768ff065891933de565cd0ff32ec4
https://tools.ietf.org/html/rfc8216#section-4.1
The peak segment bit rate of a Media Playlist is the largest bit rate
of any contiguous set of segments whose total duration is between 0.5
and 1.5 times the target duration.
Fixes#498.
Change-Id: I1f28972b9cc5977735e47906bdcd88ba3942db5a
Configurable under --enable_legacy_widevine_hls_signaling, off by
default.
When it is enabled, do not fail if provider or content_id are missing,
but log a warning instead.
Bug: 112268769.
Change-Id: I2531aa7474d2818700b90fa0679b49891bb935ef
Instead, caclulating average bandwidth by dividing the sum of the
sizes of every segment by the sum of the durations of every segment.
This aligns with the requirement in HLS spec:
https://tools.ietf.org/html/draft-pantos-http-live-streaming-23 4.1.
BandwidthEstimator is also simplified to handle all blocks only.
Fixes#361
Change-Id: I89e7d415a841f4d4048f199de8dae7ffa250467b
Cosmin Stejerean
sr90
wjywbs
Marcus Wichelmann
Vishal Shah
SteveR-PMP
Joey Parrish
modernletter
Caitlin O'Callaghan
Mark Sargent
Joey Parrish
Jacob Trimble
KongQun Yang
koln67
Weiguo Shao
Daniel Cantarín
Tomohiro IKEDA
Yohann Connell