- Implemented according to v1.0 spec @ https://www.webmproject.org/vp9/mp4/
- v0 is no longer supported
Change-Id: I189c813d788400beda797eea7da943a83dfa7d79
- Added flag --mp4_include_pssh_in_stream, default to true. If it is
set to false, the encrypted mp4 stream will not include pssh.
- Align BytesOfProtectedData to multiple of 16 bytes for cenc.
- Set TrackHeader flag to kTrackEnabled | kTrackInMovie |
kTrackInPreview
- Move mvex to after trak, required by HLS
- Add cmfc/cmfs compatible brands except for avc3/hev1, where CMAF
requires single initialization switching set which is not supported.
- Set duration to 0 in tkhd, mdhd, mvhd.
Also updated major_brand and compatible brands:
- Set major_brand to isom (iso-bmff media file format) and made dash
a compatible brand
- Replaced compatible brand iso6 with iso8 since we use sthd for text
tracks
Fixes b/36278260
Change-Id: I3cc5dd5aa1621714d517fe02fe3841d19a1a07f6
Added a flag --strip_parameter_set_nalus. When enabled, parameter
set NAL units, SPS/PPS for H264 and SPS/PPS/VPS for H265, are stripped
from frames when converting NAL byte stream (AnnexB stream) to NAL
unit stream, which generates avc1/hvc1; otherwise they are not
stripped, and avc3/hev1 is generated.
Parameter set NAL units should not be stripped if they are varying
in the frames otherwise the frames may fail to be decoded.
The flag is enabled by default as we don't usually see varying
SPS/PPS/VPS and it is more space efficient with them stripped.
Set --strip_parameter_set_nalus=false to disable the flag if there
are varying SPS/PPS/VPS in the frames. This addresses #206.
Change-Id: I34bde6f33069f9f77d51a510b39f58a0f0e141aa
- Logic for splitting up WebVTT cues into MP4 samples.
- For any cue intervals that overlap, a new sample must be created.
Change-Id: Icf7478f42d8c5790bf6f404d512c1251dd34c405
- Tracks other than video are protected using whole-block full-sample
encryption as specified in ISO/IEC 23001-7:2016(E) 9.7, which is
equivalent to a pattern of 1:0. This is different to the non pattern
encryption counterparts.
- Also updated the code to allow the existence of other protection
schemes in the original content, which will simply be ignored.
- The internal cryptor used by AesPatternCryptor should not use
constant iv, add a DCHECK for that.
- Optimize AesPatternCryptor handling on the special pattern 1:0.
Change-Id: Idc704e7bc6b347741336f38c6d3620fc19392960
This is part of the effort to support Opus in iso-bmff #83.
Changes in this CL:
- Add support for multiple SampleGroupDescription and SampleToGroup
boxes in TrackFragment box;
- Add support for SampleGroupDescription and SampleToGroup boxes
in SampleTable box;
- Add support for AudioRollRecoveryEntry in Sample Group and 'roll'
sample grouping type;
- Also fix a bug that default length was not set correctly in
SampleGroupDescription when constant iv is used.
Change-Id: I7e31386ea6cd17a8ee5e1dca4c1a90937d51368f
- BytesOfProtectedData in 'cens' SHALL also be 16-byte aligned
- Fix an incorrect box definition bug w.r.t to 'cbcs' and 'cens'
- Also add various protection scheme tests
Close#77Close#78
Change-Id: I63c8d8b01ce16ed60affa97ec95fc62bc2da06df
- crypt_byte_block and skip_byte_block for pattern-based encryption.
- constant_iv for constant iv (used by 'cbcs' protection scheme).
- Also renamed iv_size to per_sample_iv_size.
- Also changed "bool is_encrypted" to "uint8_t is_protected" to align
with CENC spec.
Issue #78
Change-Id: I2878a91e0ebe536a08a3e3109daf157fe4440e27
- FOURCC is not a mp4 only concept. It is also used elsewhere.
- RCHECK has been used outside formats/mp4.
Also updated the FOURCC enum names to match the actual fourcc code, e.g.
FOURCC_mdat for "mdat".
Change-Id: I5be02f12695882c0fb41d359305fb8ec01303a06
- Part 1.
- Add packager command line argument "protection_scheme" to specify
protection scheme. Plumb through packager code to enable CBC
encryption/decryption.
- Add scheme type "cbc1" to sinf.
- Refactor AES encryptor and decryptor.
- Need more work in the subsample handling.
Issue #77
Change-Id: I3a9304d89adf5efbfb226b6e805a3077b6cb8c68
This moves pssh parsing to its own class in media base. This type
can be used to parse and generate pssh boxes. This new type also
supports both v0 an v1 boxes.
This also modifies the pssh box definition to only have the |raw_box|
and moves all pssh parsing and handling into mp4 media parser.
A follow-up change will replace the remaining usages of 'raw' pssh
box data with the new type.
Issue #88
Change-Id: Ic2436ecb5df8b3558b81e600dc095b0efd122ab1
Parse channel layout value from dec3 box. Pass it through audio stream
info. MPD builder forms audio channel configuration to signal ec-3
codec.
Specs: 1) ETSI TS 102 366 V1.3.1 Digital Audio Compression (AC-3,
Enhanced AC-3) Standard E.1.3.1.8.
2) DASH-IF Interoperability Points v3.0 9.2.1.2.
Issue #64
Change-Id: Ia2c22dd3d82e757ba5a88ba1de35c5d593f5005e
Before this change, the media file will fail to be parsed if it contains
non-wvtt text streams. This change allows demuxing of video and audio
streams in these media files even though the text stream is ignored.
Fixes#74.
Change-Id: I7ef108a51125c4965fe48c39efe9638f3a0e4759
- Box definitions for box type DEC3.
- Parser/muxer changes to support Enhanced-AC3 audio codecs.
- MPD signaling will come in Part 3.
Issue #64
Change-Id: Ifcd5efa1f61b470ec225127925631e4329853259
- Box definitions for box type DAC3.
- Parser/muxer changes to support AC3 audio codecs.
- EC3 audio sample entry will come in Part 2.
- MPD signaling will come in Part 3.
Issue #64
Change-Id: I790b46ae8179b933bb8f7da9cdd38591fe8da43d
For mp4 outputs, a metadata box with version information is added to
moov box.
For mpd outputs, a text comment with version information is added in
the beginning of mpd file.
Issue #60
Change-Id: I783ba370781c0a8f77c910ff1172bad2e7edff75
- Add Box::WriteHeader and Box::HeaderSize methods. The concrete
box implementations should not need care about whether it is a
Box or FullBox normally.
- Rename Box::ReadWrite to Box::ReadWriteInternal to make it clear
that it is an internal methods. Make it private so it cannot be
incorrectly called in box implementions.
- Make an internal implementation of ComputeSizeInternal to compute
box size. |atom_size| is updated in ComputeSize, which wraps
ComputeSizeInternal.
Change-Id: I3fbcf8c527581b676d9d13f1ac1dd798da7c4d5f
Also update the code to generate CompressorName in VideoSampleEntry
for both AVC1 and various VP codecs.
Change-Id: I2355f8008a72806e852aa1ec6c80e9141b97d963
- Width/Height in tkhd box should be display resolution instead of
coded resolution.
- pasp was not generated earlier.
- Assuming SAR as 1:1 if it failed to be extracted successfully.
- Also update test files for mp4_media_parser_unittest.
This fixes Issue #35.
Change-Id: Iedbe6a44465aac6723b6ea2de30aed180821eccd
MSE requires 'base-data-offset-present' not to be set, but FFmpeg may
generate fmp4 files with this flag though it actually uses moof as base.
Log a warning instead of failing directly in this case.
FFmpeg may also generates fmp4 files without tfdt box
(TrackFragmentDecodeTime) box, which is again non-MSE compliant. Handle
this scenario properly.
Bug: 18613712
Also fixes a test failure in SegmentTemplateTest introduced in an earlier
change.
Bug: 19235748
Change-Id: I4bcbb675b22a832a88cd33ee64c3e99a1c6e3a63
Fix b/18005827 Packager crashes in debug mode with widevine decryption
enabled given a non-existing file.
Fix b/18005632 Packager crashes with invalid fixed_key_encryption
parameters.
Also cleans up some code.
Change-Id: I097f5c8dc113eb6d33b42b19a4bf5de125c47c30
This is a follow up to previous CL.
Generated using command:
find {media,app,mpd} -type f -exec sed -r -i 's/#include "(.*)"/#include
"packager\/\1"/' {} \;
common.gypi and mpd.gyp are also modified to take the path change into
consideration.
Change-Id: I1fb102b4eb73ae5fde5f4ab303a12cec09b05c33
KongQun Yang
Rintaro Kuroiwa
Haoming Chen
Thomas Inskip
Bei Li
Jacob Trimble