Although FRAME-RATE is optional per HLS specification, but per HLS
Authoring Specification for Apple Devices (https://apple.co/30n90DC):
Each EXT-X-STREAM-INF tag MUST have a FRAME-RATE attribute.
Also, iOS and TVos refuse to play the content if VIDEO-RANGE is
present but FRAME-RATE is missing.
Issue #632, #634.
Change-Id: Ica282f023a7e8538f7b506094e2286840cf5c193
- EditLists in input files are parsed and applied to sample timestamps.
- An EditList will be inserted in the ISO-BMFF output if
- There is an offset between the initial presentation timestamp (pts)
and decoding timestamp (dts). Chrome, as of M67, still uses dts in
buffered range API [1], which creates various problems when buffered
range by pts does not align with buffered range by dts. There is
another bug in Chrome that applies EditList to pts only [2]. This
means that we can insert an EditList to align pts range and dts range.
- MediaSamples have negative timestamps (e.g. for Audio Priming).
You may notice the below change on some contents:
- Some media duration is reduced by one or two frames. This is because
EditList in the input file was ignored in the previous code, so video
streams start with a zero dts and a non-zero pts; the smaller of dts
and pts was used as the starting timestamp (related to the earlier
workaround for Chrome's dts bug), so the calculated duration was
actually a bit larger than the actual duration. Now with EditList
applied, the initial pts is reduced to zero, so the media duration is
also reduced to reflect the actual and correct media duration.
It may also result in negative timestamps in TS/HLS Packed Audio, which
will be addressed in a follow up CL.
Fixes#112.
Partially address b/110782437.
[1] https://crbug.com/718641, fixed but behind MseBufferByPts.
[2] https://crbug.com/354518. Chrome is planning to enable the fix for
[1] before addressing this bug, so we are safe.
Change-Id: I59317740ad3807ca66fa74b3a18fdf7f32c96aeb
Removed the logic in MuxerListener to estimate bandwidth from file
size and duration, since it is not compliant to the spec.
MpdBuilder will estimate bandwidth from segment size and duration
if bandwidth is not specified in MediaInfo.
Here is the statement from DASH spec (23009-1:2014):
Consider a hypothetical constant bitrate channel of
bandwidth with the value of this attribute in bits per second
(bps). Then, if the Representation is continuously delivered
at this bitrate, starting at any SAP that is indicated either by
@startwithsap or by any Segment Index box, a client can
be assured of having enough data for continuous playout
providing playout begins after @minbuffertime *
@bandwidth bits have been received (i.e. at time
@minbuffertime after the first bit is received).
For dependent Representations this value specifies the
bandwidth according to the above definition for the
aggregation of this Representation and all complementary
Representations.
Fixes#376.
Change-Id: I0fddce39e709d0cded0a4c9ae59adbbcc97ec5ea
This flag was introduced to workaround a rounding error in Chrome
(probably in other browsers too).
Also although this flag avoids the first frame of a Period to be
dropped due to rounding error but it could cause the last frame of a
Period to be dropped.
Now that we use a high precision Period@duration, we do not expect to
see rounding errors any more. The player would be a better place for
the workaround even if it is still needed.
Related issue: #368.
Change-Id: I3bd517ecc6d548ff62e0c13394edb49d4bc68e8f
Instead, the actual earliest presentation time is used except for
the first segment if there is an offset between presentation time
(pts) and decoding time (dts).
Chrome (as of v66) reports dts instead of pts in buffered ranges in
MSE API. To avoid breaking Chrome, the earliest_presentation_time
of the first segment is set to its dts as Chrome does not like negative
values for
adjusted dts = dts + Period@start (0 for the first period)
- presentationTimeOffset (earliest_presentation_time).
Fixes#303.
Change-Id: I5ca80e05d5570961400499436f2bcc01f06e69e0
Chrome internally uses time accurate to microseconds, which is
implemented per MSE spec (https://www.w3.org/TR/media-source/).
Generate Period@duration with better precision to avoid possible
buffered range gaps in Chrome (possibly other browsers too), which
may lead to other problems like playback stall.
b/74238961
Fixes#368.
Change-Id: I357a0f62b67f75c7ca044bb99ea4e3c8bbb6fecd
It is now managed in SimpleMpdNotifier.
This avoids unnecessary increment in AdaptationSet id counter.
Also makes sure the AdaptationSet is sorted by id in XML output.
Change-Id: Ibcd0b047a71c19cd30ad7d8af9a2ed0bb05e043e
This changes almost all encrypted tests to use DiffDir. The remaining
un-updated tests are tests that won't match every time.
Change-Id: I858bbaa0beea34887cc3100eb784aa2aecd5a0a5
koln67
KongQun Yang
Aaron Vaage