The generate_version_string script was only producing correct results
in python 2, not python 3. The gyp file that references it explicitly
runs it in python3. The shebang line of the script has been updated
to match. The script itself has been updated such that it now works
correctly in both python2 and python3.
Scripts that are only used as modules (not executed directly) have had
their shebang lines removed.
This fixes CI failures on GitHub Actions.
Change-Id: I309bafd2fb05e8fb33f5e092ead179c8c42ea5d3
# LL-DASH Support
These changes add support for LL-DASH streaming.
**NOTE:** LL-HLS support is still in progress, but it's coming. :)
## Testing
`./chunking_unittest --gtest_filter="ChunkingHandlerTest.LowLatencyDash"`
`./media_event_unittest --gtest_filter="MpdNotifyMuxerListenerTest.LowLatencyDash"`
`./mpd_unittest --gtest_filter="PeriodTest.LowLatencyDashMpdGetXml"`
`./mpd_unittest --gtest_filter="SimpleMpdNotifierTest.NotifyAvailabilityTimeOffset"`
`./mpd_unittest --gtest_filter="SimpleMpdNotifierTest.NotifySegmentDuration"`
`./mpd_unittest --gtest_filter="LowLatencySegmentTest.LowLatencySegmentTemplate"`
Note, packager_test must be run from the main project directory
`./out/Release/packager_test --gtest_filter="PackagerTest.LowLatencyDashEnabledAndUtcTimingNotSet"`
`./out/Release/packager_test --gtest_filter="PackagerTest.LowLatencyDashEnabledAndUtcTimingNotSet"`
The newest pylint release complained about several issues that the
older release did not. This resolves those issues:
- removes unneeded "u" prefix from strings
- adds "encoding" parameter for all open() calls
- because "encoding" is a python3-only parameter, use python3 in all
the scripts that we control
Unfortunately, python2 is required for any scripts that import modules
from the ancient Chromium build system we're using (referenced by
DEPS), as well as kokoro scripts.
Change-Id: I2e9f97af508efe58b5a71de21740e59b1528affd
This converts all time parameters to signed, finishing a cleanup that
was started in 2018 in b4256bf0. This changes the type of:
- timestamps
- PTS specifically
- timestamp offsets
- timescales
- durations
This excludes:
- MP4 box definitions
- DTS specifically
This is meant to address signed/unsigned conversion issues on arm64
that caused some test cases to fail.
Change-Id: Ic752a20cbc6e31fea6bc0894d1771833171e7cbe
Internal CI systems and the new GitHub CI system were out of sync,
with the external system not doing any linting. Further, the internal
system was using an internal-only linter for Python.
This creates a script for Python linting based on the open-source
pylint tool, checks in the Google Style Guide's pylintrc file, creates
a custom action for linting and adds it to the existing workflows,
fixes pre-existing linter errors in Python scripts, and updates pylint
overrides.
b/190743862
Change-Id: Iff1f5d4690b32479af777ded0834c31c2161bd10
It turns out that workflows were the wrong way to abstract reusable
pieces of work. This turns common steps into custom actions (build
docs, build packager, test packager) which can be used as encapsulated
steps in multiple workflows.
This is a much more natural way to avoid duplication compared to the
previous approach of triggering one workflow from another. This also
has the benefit of all of the steps of a release being represented on
GitHub as a single workflow, making it easier to understand what is
happening and what event triggered those steps.
Change-Id: Ife156d60069a39594c7b3bb3bc32080e6453b544
Legacy players, e.g. older versions of ExoPlayer, do not handle default webvtt text alignment correctly. Need to specify `align:center` explicitly cues without text alignment for backwards compatibility.
Fixes#925.
This also allows setting the language of different text streams from
the same input. Multiple streams can use the same input stream
using different cc_index values and can each use a different language.
This also will try to pull the language from the input if not
specified.
Change-Id: I7078710b509b7d77dad8cb4299a82f954af7e9e7
I.e. the flag --generate_sidx_in_media_segments,
--nogenerate_sidx_in_media_segments work for both single-segment
and multi-segment mode with this change.
Related to #862.
Change-Id: Icd27fd00e8e036ba0c4709b48650372429cc0351
This changes the default MP4 output to use TTML and adds a way to
choose which one is used. This is done with 'format=ttml+mp4' or
'format=vtt+mp4'.
This also fixes the boxes output in WebVTT in MP4.
Change-Id: Ieaa7fc44fbf4dc020a5bb70cfa3578ec10e088ce
This only supports TTML output; meaning the user can convert WebVTT
into TTML, but not the other way around. This will be useful for
DVB-sub subtitles that would be better supported within TTML.
This only adds text-based output; a follow-up will add MP4 support.
Change-Id: I0944b7df95d7765e55f203fc5e9a644f5c455dd8
We currently have a bug about non-deterministic output in the MPD
generator. This works around that bug by optionally doing everything
in a single thread. This allows us to run manifest comparisons without
making the major changes needed to add that feature.
Issue #177
Change-Id: I10e1084dac77841220161fbd2575cdcb5c13c00e
Now text-based WebVTT also uses the generic media pipeline. This
converts the WebVttTextOutputHandler to a WebVttMuxer to be more
consistent with the other muxer types.
This also allows choosing between single-segment text and multi-segment.
Before, we would generate both and use single-segment for DASH and
multi-segment for HLS; but now you can choose between either and either
are supported in both DASH and HLS.
Change-Id: I6f7edda09e01b5f40e819290d3fe6e88677018d9
Now the same pipeline for handling the audio/videos streams will handle
the segmented text streams too. This doesn't apply to the text output,
only to the MP4 variants. This also fixes a bug where we added the
X-TIMESTAMP-MAP tag even when there wasn't TS streams; this doesn't
otherwise change the behavior around that tag.
Change-Id: I03f7cea56efa42e96311c00841330629a14aa053
The test added in the previous CL was broken due to a rebase on another
change. This subtly changed some of the byte offsets that broke the
test. This wasn't caught since I didn't rebase and re-run the tests
before merging.
Change-Id: Id7e4c7688278eae37da1a14f1648263b4dda98cd
This changes it from an OriginHandler to a MediaParser and moves the
handling of it to the Demuxer. This will allow more generic handling
of text by giving it the same abstractions as video/audio handling.
Change-Id: Ibbde3c84d228ec8e83af1ed266ea97dbc9589c24
The KeySource now only handles fetching the keys and loading any PSSH
info from the license; it will not handle generating new PSSH info
based on the config.
This will allow the PSSH generation to access to the full
EncryptionConfig so we can add additional options to it.
Issue #756
Change-Id: Ia67387aa3d5ec0d723b7f5f21fc517f64c840393
If the user has the GPAC MP4 tools installed, this will use that to
provide a better, text-based diff of the MP4 files. This makes looking
at test failures much better than just "binary files differ".
Change-Id: Ifdca54c02226a9f0fe9ddcf9c6b28e960e568111
There were several enum types that all were used for key systems. This
combines them into one to make it more clear and only needing to update
one. This also uses a bit field to specify multiple key systems instead
of using a std::vector.
Change-Id: Ia88039835492a5bd47f449ba4b76187046deeec0
Added --crypt_byte_block, --skip_byte_block to allow users to specify
protection pattern other than 1:9 for pattern based encryption scheme,
e.g. cbcs and cens.
Closes#710.
b/147307451
Change-Id: I9f64a7639170c737f138572689b28d17286325c7
Added Dolby Vision backward compatible signalling, i.e. for Dolby Vision
profile 8, both base codec without Dolby Vision and HDR codec with Dolby
Vision are signalled.
This is achieved by using a new MuxerListener implementation
MultiCodecMuxerListener, which wraps multiple child MuxerListeners and
is able to delegate to the child MuxerListeners based on the codecs in
the stream.
Closes#341.
Change-Id: I1967bb1ed503087cdd011c364e5fb5647d516ca4
HLS uses the EXT-X-MEDIA-SEQUENCE tag at the start of a live playlist in
order to specify the first segment sequence number. This is because any
live playlist have a limited number of segments, and they also keep
updating with new segments while removing old ones. When a player refreshes
the playlist, this information is important for keeping track of segments
positions.
When the packager starts, it naturally starts this count from zero. However,
there are many situations where the packager may be restarted, without this
meaning starting this value from zero (but continuing a previous sequence).
The most common situations are problems in the encoder feeding the packager.
With those cases in mind, this parameter allows to set the initial
EXT-X-MEDIA-SEQUENCE value. This way, it's possible to continue the sequence
number from previous packager run.
Closes#691.
Joey Parrish
Caitlin O'Callaghan
KongQun Yang
Samidh
Vishal Shah
Jacob Trimble
JPeMu
koln67
Joe Foraci
Zajcev Evgeny
sr90
Tim Lansen
Tomohiro IKEDA
Daniel Cantarín
Vladimir Kazakov