Per https://dashif.org/docs/DASH-IF-IOP-v4.3.pdf 4.4.3.6 Signalling the last segment number in Period, there are three ways to signal the last segment number:
a. Use the lmsg signalling as defined in clause 4.4.3.5.
b. Use the Segment Timeline with @r value greater or equal to 0.
c. Add a Supplemental Descriptor with @schemeIdUri set to http://dashif.org/guidelines/last-segment-number with the @value set to the last segment number.
We do not support (a). This change adds support for (c) when Segment Timeline (b) is not used, i.e. when Representation has constant duration (could be approximate).
Under flag --dash_add_last_segment_number_when_needed (disabled by default).
Add dash_accessibilities stream descriptor, which is a semi-colon
separated list of accessibility_scheme_id_uri=value. It is optional.
Add dash_roles stream descriptor, which is a semi-colon separated
list of strings. It is optional.
Closes#565.
Change-Id: Idb1c20bb410fdd016db07e11fe507c102a3dd8ea
Only Marlin Adaptive Streaming Specification – Simple Profile is
supported.
Two additional updates:
- Remove FairPlay ContentProtection element from DASH mpd as FairPlay
does not define a signaling in DASH.
- Updated end to end test to include all DRMs we support.
Closes#381.
Change-Id: Id12269b471ea34983b782cbd92f687332292ef59
It is not always possible to align segment duration to target duration
exactly. For example, for AAC with sampling rate of 44100, there are
always 1024 audio frames per sample, so the sample duration is
1024/44100. For a target duration of 2 seconds, the closest segment
duration would be 1.984 or 2.00533.
This feature allows MPD generator to treat these segments as having
the same duration, thus allows MPD generator to generate less
SegmentTimeline entries and potentially no SegmentTimeline entries
(replaced with SegmentTemplate@duration instead if
--segment_template_constant_duration flag is enabled).
Under flag --allow_approximate_segment_timeline. Disabled by default.
Fixes#330.
Change-Id: I5044eaa348ebbf45bf792a2af53fc95a115ae21b
The file_name fields will be used to solely indicate file paths on the
designated file system, and they are used to do normal file operations,
including file creation, file updating and file removal if needed;
added new xxx_url fields, for the URLs that should appear on DASH
manifest or HLS playlists.
xxx_url are the URIs of the media in the manifest. The fields are
converted from file_name fields but adjusted to be relative to DASH
manifest path or HLS playlist path, optionally with base_url prepended.
Previously the file_name fields are converted in place to indicate
URLs when passing to manifest / playlist builders. The original file
names were lost, which made it difficult to remove files outside of
live window.
Now that the input file names are preserved. File system APIs can
operate on the original file names while manifest / playlist generation
functions can operate on URLs.
Issue: #233
Change-Id: I36a64f16e3d1261ce91783a86588f24ad1371662
Chrome internally uses time accurate to microseconds, which is
implemented per MSE spec (https://www.w3.org/TR/media-source/).
Generate Period@duration with better precision to avoid possible
buffered range gaps in Chrome (possibly other browsers too), which
may lead to other problems like playback stall.
b/74238961
Fixes#368.
Change-Id: I357a0f62b67f75c7ca044bb99ea4e3c8bbb6fecd
Added gMock matchers for matching xmlNodePtr and its attributes.
Clean up mpd_unittests to make it easier to separate adaptation set
tests and representation tests.
Change-Id: I31816b06e9c76f92d4a82656c659f3b9acae8cb5
Current mechanism of using AdaptationSet @group is not spec compliant.
The spec compliant mechanism is to use supplemental descriptor with
schemeIdUri: urn:mpeg:dash:adaptation-set-switching:2016 as specified
in ISO/IEC 23009-1:2014/Amd.4:2016.
Fixes#156
Change-Id: I4d97648547a23315ba9c09dcadb14e18c99a45fc
1. Replace STLDeleter with unique_ptr in container, which is
supported in C++11
2. Replace string_as_array with &string[0] which is guaranteed
to work in C++11
Change-Id: I7f39c0e51fc8a3fcbb41313094a0ca6b33db7bf3
Parse channel layout value from dec3 box. Pass it through audio stream
info. MPD builder forms audio channel configuration to signal ec-3
codec.
Specs: 1) ETSI TS 102 366 V1.3.1 Digital Audio Compression (AC-3,
Enhanced AC-3) Standard E.1.3.1.8.
2) DASH-IF Interoperability Points v3.0 9.2.1.2.
Issue #64
Change-Id: Ia2c22dd3d82e757ba5a88ba1de35c5d593f5005e
- @width, @height, @frameRate for Representation element will not be
set if the attributes are set at AdaptationSet level.
Issue #55
Change-Id: Ib4e669142874f9e8f0ca773df9f87a3fef01b729
- ContentProtection elements should be added explicitly by the
AddContentProtection() methods.
- This is because some MPDs should have ContentProtection at
AdaptationSet level instead of Representation.
- Change SimpleMpdNotifier, which uses MpdBuilder, to add
ContentProtectionElements. The logic is moved from MuxerListener.
- Add Element class for specifying subelements for
ContentProtectionElement.
Change-Id: I9bedfb3e5a5ac0b3d5c702f1e6e4a8608c978d1d
- Pass pixel_height and pixel_width from VideoStreamInfo to MediaInfo.
- par can only be set if all the Representations have the same
picture aspect ratio. That is the ratio of sar_x*width:sar_y*height
should all be the same.
- If there is a Representation that does not have the sar attribute set,
par is also not set.
Change-Id: Id34c95e4a99da9ce028a9f35737cfe5bca9e5697
- The fields used to be repeated but there is no use case at the moment.
- DASH IOP explicitly disallows segments with multiple tracks.
Change-Id: Ia0af2048210c546dfaa178735605a81052ea1123
- DASH IOP requires AdaptationSets with video Representations to have:
@maxWidth (or @width if all the Representations have the same width).
@maxHeight (or @height if all the Representations have the same width).
@maxFrameRate (or @frameRate if all the Representations have the same
frame rate).
Change-Id: I1247b7461237255aeb70b7fb40f78d4439f9c529
This is a follow up to previous CL.
Generated using command:
find {media,app,mpd} -type f -exec sed -r -i 's/#include "(.*)"/#include
"packager\/\1"/' {} \;
common.gypi and mpd.gyp are also modified to take the path change into
consideration.
Change-Id: I1fb102b4eb73ae5fde5f4ab303a12cec09b05c33
Weiguo Shao
sr90
KongQun Yang
Haoming Chen
Bei Li
Rintaro Kuroiwa