Commit Graph

56 Commits

Author SHA1 Message Date
Joey Parrish cfbe5c08c2 cleanup: Convert all time parameters to signed
This converts all time parameters to signed, finishing a cleanup that
was started in 2018 in b4256bf0.  This changes the type of:
  - timestamps
    - PTS specifically
  - timestamp offsets
  - timescales
  - durations

This excludes:
  - MP4 box definitions
  - DTS specifically

This is meant to address signed/unsigned conversion issues on arm64
that caused some test cases to fail.

Change-Id: Ic752a20cbc6e31fea6bc0894d1771833171e7cbe
2021-08-05 18:24:15 +00:00
KongQun Yang 08aa9b6b2b Remove FairPlayPsshGenerator
This was introduced earlier to indicate FairPlay protection system. But
in fact, it is sufficient to just use the system id for the indication.

- Also updated various parts of the pipeline to support empty PSSH.
- Added an additional FairPlay end to end test using fMP4.

Change-Id: Ica48b7b5235e9a2b5a7f722bcd0fc1ef2073ac13
2018-09-21 00:49:35 +00:00
KongQun Yang 40ea1286b9 Add support for EditLists in ISO-BMFF
- EditLists in input files are parsed and applied to sample timestamps.
- An EditList will be inserted in the ISO-BMFF output if
  - There is an offset between the initial presentation timestamp (pts)
    and decoding timestamp (dts). Chrome, as of M67, still uses dts in
    buffered range API [1], which creates various problems when buffered
    range by pts does not align with buffered range by dts. There is
    another bug in Chrome that applies EditList to pts only [2]. This
    means that we can insert an EditList to align pts range and dts range.
  - MediaSamples have negative timestamps (e.g. for Audio Priming).

You may notice the below change on some contents:
- Some media duration is reduced by one or two frames. This is because
  EditList in the input file was ignored in the previous code, so video
  streams start with a zero dts and a non-zero pts; the smaller of dts
  and pts was used as the starting timestamp (related to the earlier
  workaround for Chrome's dts bug), so the calculated duration was
  actually a bit larger than the actual duration. Now with EditList
  applied, the initial pts is reduced to zero, so the media duration is
  also reduced to reflect the actual and correct media duration.

It may also result in negative timestamps in TS/HLS Packed Audio, which
will be addressed in a follow up CL.

Fixes #112.
Partially address b/110782437.

[1] https://crbug.com/718641, fixed but behind MseBufferByPts.
[2] https://crbug.com/354518. Chrome is planning to enable the fix for
    [1] before addressing this bug, so we are safe.

Change-Id: I59317740ad3807ca66fa74b3a18fdf7f32c96aeb
2018-07-26 23:20:21 +00:00
KongQun Yang f089d1d0d4 Deprecate --mp4_use_decoding_timestamp_in_timeline
It was implemented to workaround Chromium's DTS
https://crbug.com/398130, but the workaround does not really work in
all situations.

Remove it now as we already have another workaround available.

Change-Id: I291f559d78120fb743a6679b7d927e5bbc5b6b4e
2018-07-02 21:59:01 +00:00
KongQun Yang 55050fe6b5 [Ad Insertion] Avoid adjusting EPT except for the first file
EPT (earliest presentation time) may be adjusted not to be lower than
the decoding timestamp (dts), but the adjustment should only be done
on the first file when there is one file per Representation per Period.
The second file and onwards should not be adjusted otherwise a GAP
would be created.

Closes #384
Closes b/78517422

Change-Id: I56771ad8fbbe6a87b832ec58854cfbf37d5f1817
2018-06-01 15:53:02 -07:00
KongQun Yang 8333908df1 Implemented Id3Tag class to handle ID3 tag
Also switched the original code in mp4 to use the new Id3Tag class.

Change-Id: I1db2c6c6142ed98b72a432980a6a54815f1a8cc4
2018-05-16 01:04:02 +00:00
KongQun Yang b5a73fc1d5 Refactor ProtectionSystemSpecificInfo class to struct
This is in preparation of supporting entitlement license API, where
common encryption server may return concatenated PSSHs directly.

Refactored ProtectionSystemSpecificInfo into a struct containing
concatenated PSSHs. This will make it easier to pass PSSHs around.

Also, most of the time, users of ProtectionSystemSpecificInfo do
not care what is in PSSH; so moved PSSH box parsing and building out
of ProtectionSystemSpecificInfo.

b/78171767

Change-Id: I1c4d5e7e23efd2f7d4b2b9704378323112e47f00
2018-05-11 00:10:07 +00:00
KongQun Yang b24a95b1aa Rewrite init segment in MultiSegmentSegmenter::DoFinalize
This is called when reaching end of the file of the media. The duration
of the media is updated.

Fixes #340.

Change-Id: I446f2d341b02125d4a7d8c958bda269b5403cb9c
2018-03-05 14:25:08 -08:00
KongQun Yang 8257eea804 Bug fixes and clean-ups for I-Frame playlists
- Add empty lines between different types of renditions to improve
  readability.
- Group variants with the same audio/text group together, as it is
  where the Adaptation occurs.
- Write master playlist after writing media playlists. This makes
  more sense and it is also necessary to have the bandwidth of
  the last iframe playist segment correctly computed.
- For fMP4, I-Frame segment must include the 'moof' header.
- Fix a problem that hls_iframe_playlist_name is not passed to
  MuxerListenerFactory.

Issue: #287

Change-Id: Icf37c5de1dc29f85ae3f419cbc3264d04ca491a4
2018-02-05 17:36:28 -08:00
KongQun Yang b647c6731c Support KeyFrame events in TS and MP4
Issue: #287

Change-Id: I7c50853c7cc61c5fadbb620f44f7574a27dc2b68
2018-02-02 14:05:50 -08:00
Aaron Vaage 16eff80497 Made StreamData Have Const Pointers
In prep for changes to Trick Play, we want to make all messages
copy on write so that if the same message is sent to multiple
handlers, it is not possible for one handler to change the data
another handler is using.

Change-Id: I554166ca11c532412e4dfced5603972ca24dc2bb
2017-09-19 21:06:29 +00:00
KongQun Yang 4e82ab13bd Consolidate Mp4OutputParams into MuxerOptions
Change-Id: I533e40ef9eb84453c15cbdb7ef42fc85bef5125d
2017-08-18 11:57:34 -07:00
Kongqun Yang d007ddf20b [MP4] Make outputs CMAF compatible
- Added flag --mp4_include_pssh_in_stream, default to true. If it is
  set to false, the encrypted mp4 stream will not include pssh.
- Align BytesOfProtectedData to multiple of 16 bytes for cenc.
- Set TrackHeader flag to kTrackEnabled | kTrackInMovie |
                          kTrackInPreview
- Move mvex to after trak, required by HLS
- Add cmfc/cmfs compatible brands except for avc3/hev1, where CMAF
  requires single initialization switching set which is not supported.
- Set duration to 0 in tkhd, mdhd, mvhd.

Also updated major_brand and compatible brands:
- Set major_brand to isom (iso-bmff media file format) and made dash
  a compatible brand
- Replaced compatible brand iso6 with iso8 since we use sthd for text
  tracks

Fixes b/36278260

Change-Id: I3cc5dd5aa1621714d517fe02fe3841d19a1a07f6
2017-03-30 15:33:39 -07:00
KongQun Yang 3d7635d5de Integrate EncryptionHandler
Change-Id: I639e5707994a6601ee02078cd6f77cb38b481585
2017-03-23 18:25:59 +00:00
Kongqun Yang 8806f78655 Use size_t as the type of stream_index
Change-Id: Ica8ffeccc45c1adf5def6fe9b2edde5708d6b432
2017-03-16 20:54:48 +00:00
Kongqun Yang 160700b452 Integrate ChunkingHandler
Also moved MediaHandler output validation to Initialize instead.

This CL also addresses #122 with consistent chunking.

Change-Id: I60c0da6d1b33421d7828bcb827d18899e71884ce
2017-03-16 20:54:36 +00:00
KongQun Yang 8f2cd6da91 Implements Demuxer and Muxer media handlers
- Also sets up the packaging and verify it works.

Some of the changes are temporary to get the integration going.

Change-Id: I0cf6c379d185e157808acabb9ef58ff93d4a39ae
2017-03-08 19:11:52 +00:00
Kongqun Yang 97fbaaa567 Replace scoped_refptr with std::shared_ptr
Change-Id: Ie8ea66e78c42c7387a97bb1abc331c636be11aa4
2017-01-26 02:20:47 +00:00
Haoming Chen 93fe5457bf Fix x64 build on Windows.
- Fix integer conversion warnings.
- Fix #168.

Change-Id: Ie9aadea86a293b49e0854d6549800083143c79df
2017-01-05 14:19:35 -08:00
Kyle Alexander 0c2ee4c844 Add support for 4K and 8K content.
Adds UHD1 and UHD2 track types to support 4K and 8K content.

Bug: Closes #163
Change-Id: I8fd893725cae88e9944244a48607cbaab591b401
2016-12-13 19:24:22 +00:00
Kongqun Yang c3d1dc1733 Deprecate STLDeleter and string_as_array
1. Replace STLDeleter with unique_ptr in container, which is
   supported in C++11
2. Replace string_as_array with &string[0] which is guaranteed
   to work in C++11

Change-Id: I7f39c0e51fc8a3fcbb41313094a0ca6b33db7bf3
2016-09-01 17:39:11 +00:00
Kongqun Yang 23f2913248 Update DEPS to fix mac build failure
Change-Id: I1cf95d5da8e3b950300cd61cd9286e957ef653ce
2016-08-19 13:49:41 -07:00
Kongqun Yang 644629c616 Replace scoped_ptr with std::unique_ptr
Change-Id: I1ed18bf876b6154d08a1f7913aa7e76c525451f9
2016-08-18 17:12:36 -07:00
Thomas Inskip 336ea5cb34 Windows build working
Change-Id: I6d9cfa0a310c4c6125c839e4d6a085903e981c9c
2016-08-18 08:30:26 -07:00
Kongqun Yang fae7874c4c Add a runtime flag to use dts in timeline for mp4
This flag is needed to workaround the Chromium bug
https://crbug.com/398130, which uses decoding timestamp
in buffered range.

Closes #113

Change-Id: Ib8f18be7165dd968bdc36c18ce29f694235c0c26
2016-07-19 18:56:08 +00:00
Kongqun Yang f3d35b730c Add version information to generated HLS manifests
- Also refactor the existing version code.

Change-Id: Ib409630c4f87965a37b1d6a1bcec68178a704ce6
2016-07-11 23:26:36 +00:00
Rintaro Kuroiwa db70721e35 Fix HLS packaging failure with clear lead = 0
- Add MuxerListener::OnEncryptionStart() for notifying that further
  segments are encrypted.

b/29621230

Change-Id: I881b29d55baaf3d04e005a3b95d898071c3f272b
2016-07-11 20:43:01 +00:00
Kongqun Yang d08f6ae0cc Fix cbcs/cens behavior when applied to non video tracks
- Tracks other than video are protected using whole-block full-sample
  encryption as specified in ISO/IEC 23001-7:2016(E) 9.7, which is
  equivalent to a pattern of 1:0. This is different to the non pattern
  encryption counterparts.
- Also updated the code to allow the existence of other protection
  schemes in the original content, which will simply be ignored.
- The internal cryptor used by AesPatternCryptor should not use
  constant iv, add a DCHECK for that.
- Optimize AesPatternCryptor handling on the special pattern 1:0.

Change-Id: Idc704e7bc6b347741336f38c6d3620fc19392960
2016-06-08 17:02:26 +00:00
Kongqun Yang 4f9c8ea781 Rename top level namespace to shaka
Issue #103

Change-Id: I67945c8ec6d2c178494d3b5400e5ec0170e9d115
2016-05-24 21:55:55 +00:00
Kongqun Yang 72c3a76699 Update repo url in version string
Issue #103

Change-Id: Iec7db3d155c81cf989f1078ed32692f8e037aa65
2016-05-24 21:55:45 +00:00
Kongqun Yang 940cc43de2 Add support for AudioRollRecoveryEntry
This is part of the effort to support Opus in iso-bmff #83.

Changes in this CL:
- Add support for multiple SampleGroupDescription and SampleToGroup
  boxes in TrackFragment box;
- Add support for SampleGroupDescription and SampleToGroup boxes
  in SampleTable box;
- Add support for AudioRollRecoveryEntry in Sample Group and 'roll'
  sample grouping type;
- Also fix a bug that default length was not set correctly in
  SampleGroupDescription when constant iv is used.

Change-Id: I7e31386ea6cd17a8ee5e1dca4c1a90937d51368f
2016-05-16 22:25:38 +00:00
Rintaro Kuroiwa e422b4eb0e Handle encryption in TsSegmenter
- Move GetTrackTypeForEncryption() to muxer_util.h.

Change-Id: I315957cb8983f4e7c4acff6907dfdd6ad6907c82
2016-05-11 16:21:05 -07:00
Kongqun Yang 855d1b028f Correctly generate ContentProtection value for non-cenc protection schemes
Change-Id: Ie5469a7f192cc6167f029befd9cca7f9ab0d1f27
2016-04-26 17:27:04 +00:00
Rintaro Kuroiwa 300c23104e MuxerOptions and MuxerListener change for HLS
- Add hls_name and hls_group_id fields to MuxerOptions. This is used to
  pass the NAME and GROUP-ID values for EXT-X-MEDIA tag to
  MuxerListener.
- Change MuxerListener::OnEncryptionInfoReady() to take an
  initialization vector.
- Change MuxerListener::OnNewSegment() to take segment name.
- Reworded and formatted MuxerListener comments to Doxygen style.

Issue #85

Change-Id: Iea06e68552a56ae180177ffd6ca315a7cf39456c
2016-04-18 11:40:10 -07:00
KongQun Yang e253747453 Add support for 'cbcs' and 'cens' protection schemes
Issue #78

Change-Id: I9f71b9a92067e2f6b388092494a7d6a84986cdc0
2016-04-14 15:31:11 -07:00
KongQun Yang c8819cb257 Add mp4 box fields for pattern encryption
- crypt_byte_block and skip_byte_block for pattern-based encryption.
- constant_iv for constant iv (used by 'cbcs' protection scheme).
- Also renamed iv_size to per_sample_iv_size.
- Also changed "bool is_encrypted" to "uint8_t is_protected" to align
  with CENC spec.

Issue #78

Change-Id: I2878a91e0ebe536a08a3e3109daf157fe4440e27
2016-04-14 20:06:19 +00:00
KongQun Yang 2ac57bf9b9 Use FOURCC as protection scheme parameter
- Remove EncryptionMode enums
- Remove AesEncryptor::InitializeWithRandomIv, replaced with
  a static function AesCryptor::GenerateRandomIv, which should
  be called to generate the iv if the iv is empty.

This change is to prepare support for CBCS and CENS pattern-based
protection schemes.

Issue #77

Change-Id: Icba35089d6e451cbea7ebbf5dd5674079f206390
2016-04-12 16:06:49 -07:00
KongQun Yang 0218d9c690 Move fourccs.h and rcheck.h to media/base
- FOURCC is not a mp4 only concept. It is also used elsewhere.
- RCHECK has been used outside formats/mp4.

Also updated the FOURCC enum names to match the actual fourcc code, e.g.
FOURCC_mdat for "mdat".

Change-Id: I5be02f12695882c0fb41d359305fb8ec01303a06
2016-04-12 21:28:37 +00:00
Bei Li e39c3572af Add support for "AES 128-bit Cipher Block Chaining (CBC-128) Encryption"
- Part 1.

- Add packager command line argument "protection_scheme" to specify
  protection scheme. Plumb through packager code to enable CBC
  encryption/decryption.
- Add scheme type "cbc1" to sinf.
- Refactor AES encryptor and decryptor.
- Need more work in the subsample handling.

Issue #77

Change-Id: I3a9304d89adf5efbfb226b6e805a3077b6cb8c68
2016-03-17 16:51:04 -07:00
Jacob Trimble 144cdc5e59 Change to use ProtectionSystemSpecificInfo.
* EncryptionKey now contains them rather than a PSSH box.
  * Outputs PSSH boxes for each entry.
  * Outputs a ContentProtection element for each entry.
* Removed SystemName and UUID from KeySource.
* Removed --scheme_id_uri packager argument.

Issue #88

Change-Id: I2651784c3220fd64f5b1773fdcd70285690cf8c0
2016-03-11 17:56:25 +00:00
Jacob Trimble 96abd90ca2 Only encrypt video slice NAL units.
For non-video slices, the data is not encrypted.  This also skips the
frame headers for H.264; support for H.265 will be added later.

Issue #40

Change-Id: Id0cb0fb9ddb6adedf63ef4aef6b3a26260a21654
2016-02-22 21:52:05 +00:00
KongQun Yang e0040a4910 Add version information in generated outputs
For mp4 outputs, a metadata box with version information is added to
moov box.

For mpd outputs, a text comment with version information is added in
the beginning of mpd file.

Issue #60

Change-Id: I783ba370781c0a8f77c910ff1172bad2e7edff75
2016-01-08 19:08:56 +00:00
KongQun Yang 098e087459 Implement SampleEncryption box parsing and generation
Issue #41

Change-Id: Ic57436b6e6c8b58fc264037fd81c98627c525932
2016-01-05 01:56:06 +00:00
KongQun Yang 94401d750a VP9 codec string from bitstream and subsample encryption support
- Parse vp9 bitstream to get vpx codec configuration
- Add subsample encryption for vp9
- Also fixed a bug in VP9 parser if segmentation update_map is enabled

Change-Id: I69dc97088aa38c94c6d37fdbcf3d9cfc942a3df6
2015-12-30 21:39:34 +00:00
KongQun Yang c8e3345959 Some code clean ups in box definitions
- Add Box::WriteHeader and Box::HeaderSize methods. The concrete
  box implementations should not need care about whether it is a
  Box or FullBox normally.
- Rename Box::ReadWrite to Box::ReadWriteInternal to make it clear
  that it is an internal methods. Make it private so it cannot be
  incorrectly called in box implementions.
- Make an internal implementation of ComputeSizeInternal to compute
  box size. |atom_size| is updated in ComputeSize, which wraps
  ComputeSizeInternal.

Change-Id: I3fbcf8c527581b676d9d13f1ac1dd798da7c4d5f
2015-12-21 18:40:05 +00:00
Rintaro Kuroiwa 76e5be3756 More fix for live
- Neither live with or without key rotation did not output the right
  result.
- No key rotation: did not produce any ContentProtection element.
- With key rotation: did not have DRM specific ContentProtection.
- To get key rotation working with shaka player, <cenc:pssh> elements
  are removed.

Change-Id: I1f34d303ae1f3ea81820e3368ab66b8420498372
2015-09-29 15:12:46 -07:00
Rintaro Kuroiwa c75d319985 Live profile MPD did not have ContentProtection
- Because MpdBuilder no longer sets ContentProtection, live was broken.
- For key-rotation, <cenc:pssh> element is updated.

Change-Id: I45bb80a12faff39ccf5deb82439c0732ed9cea59
2015-09-16 15:50:00 -07:00
Kongqun Yang 336435fcca Address one sample fragment issue #33
The segment duration was not reset after segment was finalized. It
was reset after adding one sample. This new sample was added to the
new fragment but was not recorded in the new segment, which resulted
in off-by-one error in the segment generation.

Change-Id: I1f9e00591be6b897773bf6caf94409b4bcd2277f
2015-08-04 14:19:00 -07:00
Rintaro Kuroiwa 5c8efd332e Pass content protection information to MuxerListener
- The UUID and DRM name can be fetched from KeySource.
- Add ProtectedContent message to MediaInfo. The message contains basic
  information for the protected content, such as the default key ID for
  the content.
- The message is required to separate Representations with different
  content protection information into different AdaptationSets.

Change-Id: Ib9dc834ae0abf93b7ca0acdf52a865b1394a4816
2015-07-13 19:03:44 -07:00
Rintaro Kuroiwa d685edef62 Pass sample duration to MPD
- Get the first sample duration in Segmenter.
- Pass the value all the way to Representation thru MuxerListener.

Change-Id: I76fd970f8140d359863363dc347958f680cca5ae
2015-06-23 13:12:17 -07:00