This removes all chromium dependencies from media/base/ and completes
the build system in CMake.
The ClosureThread class and its classes were removed, as they were
specific to chromium base. ClosureThread has been replaced by
std::thread.
The byte-swapping utilities in network_util.cc have been removed and
replaced with absl.
generate_unique_temp_path() was split out of file_unittest.cc into
file_test_util.cc, where other test suites could make use of it.
WARN_UNUSED_RESULT was replaced with the C++ standard attribute
[[nodiscard]].
The base::Clock interface was replaced with a typedef for a function
pointer that returns the current time.
This re-enables the tests in http_key_fetcher_unittest.cc by using
httpbin.org.
Issue #1047 (CMake porting)
Issue #346 (absl porting)
## The issue
- With LL-DASH mode enabled, the gap size warning was hit and printed to the console every time a new segment was registered to the manifest.
- This occurred because the first chunk's size and duration were being stored for each segment, rather than the full segment size and duration. Note, only the first chunk's metrics are known at first because in low latency mode, the segment is registered to the manifest before it is finished being processed and written.
- Because of this, the gap size check was comparing the end time of the first chunk in the previous segment to the beginning time of the current segment, causing the check to fail every time.
## The Fix
- Update a low latency segment's duration and size once the segment file has been fully written.
- The full segment size and duration will be used to update the bandwidth estimator and the segment info list.
- Updating the segment info list to hold the full duration is necessary for satisfying [the gap size check found in Represenation.cc](https://github.com/google/shaka-packager/blob/master/packager/mpd/base/representation.cc#L391).
- NOTE: bandwidth estimation is currently only used in HLS
# LL-DASH Support
These changes add support for LL-DASH streaming.
**NOTE:** LL-HLS support is still in progress, but it's coming. :)
## Testing
`./chunking_unittest --gtest_filter="ChunkingHandlerTest.LowLatencyDash"`
`./media_event_unittest --gtest_filter="MpdNotifyMuxerListenerTest.LowLatencyDash"`
`./mpd_unittest --gtest_filter="PeriodTest.LowLatencyDashMpdGetXml"`
`./mpd_unittest --gtest_filter="SimpleMpdNotifierTest.NotifyAvailabilityTimeOffset"`
`./mpd_unittest --gtest_filter="SimpleMpdNotifierTest.NotifySegmentDuration"`
`./mpd_unittest --gtest_filter="LowLatencySegmentTest.LowLatencySegmentTemplate"`
Note, packager_test must be run from the main project directory
`./out/Release/packager_test --gtest_filter="PackagerTest.LowLatencyDashEnabledAndUtcTimingNotSet"`
`./out/Release/packager_test --gtest_filter="PackagerTest.LowLatencyDashEnabledAndUtcTimingNotSet"`
This converts all time parameters to signed, finishing a cleanup that
was started in 2018 in b4256bf0. This changes the type of:
- timestamps
- PTS specifically
- timestamp offsets
- timescales
- durations
This excludes:
- MP4 box definitions
- DTS specifically
This is meant to address signed/unsigned conversion issues on arm64
that caused some test cases to fail.
Change-Id: Ic752a20cbc6e31fea6bc0894d1771833171e7cbe
This brings our default build config more in line with what is
necessary for some platforms anyway: using the system-installed
toolchain and sysroot to build everything.
We will no longer fetch source or binaries for any specific build
tools, such as libc++, clang, gold, binutils, or valgrind.
The main part of this change is the changing of default gyp settings
in gyp_packager.py. For this, a bug in gyp_packager.py had to be
fixed, in which similar GYP_DEFINE key names (such as clang and
host_clang) would conflict, causing some defaults not to be installed
properly.
In order to enable clang=0 by default, some changes had to be made in
common.gypi:
- compiler macros added to fix a compatibility issue between
Chromium's base/mac/ folder and the actual OSX SDK
- replaced clang_warning_flags variables with standard cflags
settings, plus xcode_settings for OSX
- turned off warnings-as-errors for non-shaka code, rather than
allow-listing specific warning types, since we can't actually fix
those warnings on any platform
- disabled two specific warnings in shaka code, both of which are
caused by headers from our non-shaka dependencies
Also, one warning (missing "override" keyword) has been fixed in
vod_media_info_dump_muxer_listener.h.
Although these changes were done to make building simpler on a wider
array of platforms (arm64, for example), it seems to make the build a
bit faster, too. For me, at least, on my main Linux workstation:
- "gclient sync" now runs 20-30% faster
- "ninja -C out/Release" now runs 5-13% faster
The following environment variables are no longer required:
- DEPOT_TOOLS_WIN_TOOLCHAIN
- MACOSX_DEPLOYMENT_TARGET
Documentation, Dockerfiles, and GitHub Actions workflows have been
updated to reflect this.
The following GYP_DEFINES are no longer required for anyone:
- clang=0
- host_clang=0
- clang_xcode=1
- use_allocator=none
- use_experimental_allocator_shim=0
Documentation, Dockerfiles, and GitHub Actions workflows have been
updated to reflect this.
The following repos are no longer dependencies in gclient:
- binutils
- clang
- gold
- libc++
- libc++abi
- valgrind
The following gclient hooks have been removed:
- clang
- mac_toolchain
- sysroot
Change-Id: Ie94ccbeec722ab73c291cb7df897d20761a09a70
Now text-based WebVTT also uses the generic media pipeline. This
converts the WebVttTextOutputHandler to a WebVttMuxer to be more
consistent with the other muxer types.
This also allows choosing between single-segment text and multi-segment.
Before, we would generate both and use single-segment for DASH and
multi-segment for HLS; but now you can choose between either and either
are supported in both DASH and HLS.
Change-Id: I6f7edda09e01b5f40e819290d3fe6e88677018d9
Added Dolby Vision backward compatible signalling, i.e. for Dolby Vision
profile 8, both base codec without Dolby Vision and HDR codec with Dolby
Vision are signalled.
This is achieved by using a new MuxerListener implementation
MultiCodecMuxerListener, which wraps multiple child MuxerListeners and
is able to delegate to the child MuxerListeners based on the codecs in
the stream.
Closes#341.
Change-Id: I1967bb1ed503087cdd011c364e5fb5647d516ca4
Calculate FRAME-RATE from sample duration as in the DASH solution.
Right now calculated frame-rate may not be accurate in some scenarios,
so we avoid setting the attribute in HLS unless it is more than 30
fps. We will set it unconditionally once it is fixed.
Fixes#634.
Change-Id: I87b6e9a047d959ae88dd4dcb2b4786527ba5c9fc
- Parse and extract transfer_characteristics from H264/H265 VUI
parameters.
- Set VIDEO-RANGE attribute in HLS according to HLS specification:
https://tools.ietf.org/html/draft-pantos-hls-rfc8216bis-02#section-4.4.4.2
- Also added an end to end test.
Fixes#632.
Change-Id: Iadf557d967b42ade321fb0b152e8e7b64fe9ff3e
Add dash_accessibilities stream descriptor, which is a semi-colon
separated list of accessibility_scheme_id_uri=value. It is optional.
Add dash_roles stream descriptor, which is a semi-colon separated
list of strings. It is optional.
Closes#565.
Change-Id: Idb1c20bb410fdd016db07e11fe507c102a3dd8ea
Add hls_characteristics stream descriptor, which is a colon or semi-colon
separated list of strings. It is optional.
Fixes#430.
Change-Id: Ifcf79316e68768ff065891933de565cd0ff32ec4
This flag was designed for two purpose:
- Grouping fragments into subsegments, achieving three level hierarchy:
segment < subsegment < fragment.
- Indicate whether to generate 'sidx' box in media segments (when the
value is set to a negative number).
There are no practical use case for the first purpose. Removing it to
simplify the code and reduce the confusion.
Introduce another flag --generate_sidx_in_media_segments for the second
purpose.
Change-Id: I4be7cd42662fb324c1158b978e05768ee49dd048
Allow the output file to contain template identifiers like $Number$,
$Time$ etc. Unlike the actual template used in SegmentTemplate, the
identifiers in output will be populated before pushing to the DASH
manifest.
Issue: #384
Change-Id: Ife1caadb6fccd32167fa1bc83fe2afcb2d2ad087
This is needed to support one file per representation per period where
there will be multiple content files generated.
Issue: #384
Change-Id: Ib7af750edf864d99075b8da4f3640217a5a94302
This is in preparation of supporting entitlement license API, where
common encryption server may return concatenated PSSHs directly.
Refactored ProtectionSystemSpecificInfo into a struct containing
concatenated PSSHs. This will make it easier to pass PSSHs around.
Also, most of the time, users of ProtectionSystemSpecificInfo do
not care what is in PSSH; so moved PSSH box parsing and building out
of ProtectionSystemSpecificInfo.
b/78171767
Change-Id: I1c4d5e7e23efd2f7d4b2b9704378323112e47f00
Removed the logic in MuxerListener to estimate bandwidth from file
size and duration, since it is not compliant to the spec.
MpdBuilder will estimate bandwidth from segment size and duration
if bandwidth is not specified in MediaInfo.
Here is the statement from DASH spec (23009-1:2014):
Consider a hypothetical constant bitrate channel of
bandwidth with the value of this attribute in bits per second
(bps). Then, if the Representation is continuously delivered
at this bitrate, starting at any SAP that is indicated either by
@startwithsap or by any Segment Index box, a client can
be assured of having enough data for continuous playout
providing playout begins after @minbuffertime *
@bandwidth bits have been received (i.e. at time
@minbuffertime after the first bit is received).
For dependent Representations this value specifies the
bandwidth according to the above definition for the
aggregation of this Representation and all complementary
Representations.
Fixes#376.
Change-Id: I0fddce39e709d0cded0a4c9ae59adbbcc97ec5ea
And for HlsNotifier and SimpleHlsNotifier as well.
This will make it easier to add preserve_segments_outside_live_window
param in a later CL.
Change-Id: I86d464fe247e04574158a0a76e39d8a122960ae4
This change has the hls master playlist add the text codec string
to the list of codecs in a variant.
Bug: 72942756
Change-Id: Ib25bb2064a291d10d7b1d261a4307991df62220c
If no hls group name is given, we would default to "audio" but as
we are working to support text, this won't make sense to see
GROUP="audio" on a text stream.
Instead default to "default-audio-group" for audio streams. A specific
text default will be added later.
Bug: #205
Change-Id: Iefc8bfd35708286619d0004348294d98f2c38482
Instead of using next segment start time, as CueEvent time may not
align with segment start time exactly.
Also remove the incorrect DCHECK in ChunkingHandler when processing
kScte35Event.
Change-Id: I4987740c99c8d0d25c9b99bddc5e557e45d308e0
Moved muxer listener creation into a factory so that it can be
initialized once and then the factory only needs to be passed
around rather than all the parameters.
Change-Id: Ibf7df66c08debddbe6f6ff8995e7910b9ad17f3f
Changed muxer listener to use "default" instead of {}
when defining its constructor and destructor in its
header file.
Change-Id: I3c80e808aa624293c3d7720ac6a47b470a663312
This change introduces handlers to output WebVtt text files. There is
only one output but there is a common base to support others.
WebVttOutputHandler which handles all communication with other handlers
and WebVttSegmentedOutputHandler is responsible for listening for events
and choosing when and where to write cues and headers.
Bug: 36138902
Change-Id: I2b13a94262554398e66fee8cf024aa21041ddbab
Seeing some failures on some platforms when compiled with clang
disabled:
GYP_DEFINES="clang=0" gclient runhooks
Several changes to make it work:
1. Mark packager code with packager_code=1 in GYP definitions.
2. Disable a few checks in non-packager code, which we do not have
direct control: dangling-else, deprecated-declarations,
unused-function
3. Fix the relevant errors in packager code.
4. Revert HAVE_STROPTS_H in curl config which is not available in
all linux distributions.
Fixes#286Fixes#293
Change-Id: I729b41f99403c5ad9487c6cc4a7dc06f6323cef8
Derive file size from media ranges instead.
Also fix subsegment range reporting for WebM (internal variable,
no output affected).
Change-Id: I5f8152dff4c2cd5fbae5550992b86a669e278f7b
- Use byte range format if segment_template is not set in MediaInfo.
- Change HlsNotifier::NotifyNewSegment() to take start byte offset.
- Change HlsNotifyMuxerListener to cache the segment information if
MuxerOptions::segment_template is set.
Change-Id: Ida1b8b9198acc5c43e3a5d9a641c78c81bc9a6ac
- Changed OnMediaEnd() to take (sub)segment ranges.
- Define a structure to pass the ranges.
- This requires muxers to "cache" the segment ranges but in most cases,
they already do it, e.g. 'sidx' for mp4.
Change-Id: I16b974c1f0f54ca658cc6dbe605efff84a3f52eb
- Remove the TS key rotation not supported check as there is nothing
to be done for key rotation in TS for SAMPLE-AES.
- Fix IV updated problem in new segments even if crypto period does
not change.
- Avoid duplicate EXT-X-KEY tags if it does not change.
- Make EXT-X-DISCONTINUITY-SEQUENCE match with number of removed
EXT-X-DISCONTINUITY.
- Added end to end test for HLS with key rotation.
Change-Id: I73cb82e9f5575fcdf63ee643228efe78e6766302
Joey Parrish
Caitlin O'Callaghan
Joey Parrish
Samidh
Jacob Trimble
Weiguo Shao
Tim Lansen
sr90
KongQun Yang
Aaron Vaage
Haoming Chen
Ivan L. Isaev
Rintaro Kuroiwa
Haoming Chen