Opening a named pipe can block until both ends are open, and we cannot
control when the other end will be open. Ideally, we would always
open files in a thread so that Packager can be used with piped inputs
from naive applications without a potential deadlock.
This change will defer opening WebVTT files until the parser Run()
method is called from a thread. This way, WebVTT files being sent in
from a pipe will never be able to block the main thread.
Previously, files were opened on the main thread before calling the
parser constructor, passing the open file to the constructor as an
argument. I also tried doing it in the parser's InitializeInternal()
method, but that is also called from the main thread.
Change-Id: I54cc68ed9d48a8dc697829119be84d4065b1ae1c
Note that STYLE and REGION are not supported in mp4 container due to
spec limitation as 14496-30:2014 does not specify a way to signal
styles/regions inside mp4.
Closes#344.
Change-Id: I05c14df916f7b2c7ca4364ee9407e0eda4dc7a3f
Configurable with --transport_stream_offset_ms.
This is needed to compensate for possible negative timestamps in
inputs, which could happen on ISO-BMFF with EditLists.
Issue #112.
Change-Id: I0fce8766c9df2911b9bb859c1e54052a8ed2abfb
WebVTT cues without payload may not carry meaningful information, but it
is allowed by WebVTT specification [1]. It could also be useful
sometimes, e.g. to signal the time progression in live case.
Fixes#433.
[1] https://www.w3.org/TR/webvtt1/#types-of-webvtt-cue-payload
Change-Id: I9e31f4a3789cbdafb7667b64f4019834190ecfc0
Before we had an assert that would catch if a sample had an
invalid times, however input may have bad times.
We did have a message if we saw a sample with a duration equal to
zero. This expands that check to check if the time is valid in
general and will ignore any sample that is not valid.
Fixes#425
Change-Id: I9774bfbdbd401f3016d2c345665b9973d1889db7
Previously, the text padder media handler would assume that text always
started at time zero. This would work for VOD but would result with a
large pad at the start of LIVE content.
To avoid this, the text padder will use a bias to test whether or not it
thinks the content starts at zero. Right now the bias is set to be 10
minutes, but will later be configurable with a command line flag.
10 minutes was used as LIVE content will have much larger values and VOD
content should have much lower values.
Issue: #416
Change-Id: I07af15a577392fb030e36f052085cd4e667700e8
Added the key frame field to the IsMediaSample mather. All
tests that do not care about a sample being a keyframe (or not)
have been updated to use "_".
Change-Id: I44180687c58c260b6856e683d647f532227b14d5
Updated all the stream data matcher we use in our unit tests
to allow us to use matchers in them. We are now able to use "_"
to ignore specific parameters.
With this we were able to replace the different version of
matchers for each stream data type with a single instance for
each type.
Includes updates to printing strings to the listener. Strings
now go through a "pretty" function to help make it easier to
read them in the output.
Change-Id: I146351b54fccd63ab9ec936877e6c6b30f9aa9fc
Make the text stream info factory method in media_handler_test_base
require the caller to specify the time scale.
Issue: #399
Change-Id: Ibdfb183e0aa3f4ff50edf6b58c4e9b966006c6d2
Text Samples with no payload should be ignored, so this adds a
test to check that samples with no payload get treated the
same as a gap.
As long as this case is true, using gaps in our other tests should
functionally be the same as using samples with no payload.
Change-Id: Ic16b240c43eda2514b537a2d938d4135638adc4e
Before we used the sample payload for each text sample as we were
focusing on the times rather than the contents.
As we look to add tests that rely on specific sample payloads, we
need to change the tests to explicitly set the payload for each
sample.
Change-Id: I24174686f46535cf6c2d59a18308101a3bb51c87
In our text to mp4 tests, we were only checking if the times on
the samples lined-up with what we were expecting.
We want to check that text sample contents (ids, settings, and
payloads) were correctly merged into a single media sample. To
verify this, we now check if the sample ids appear in the
media sample.
Change-Id: Ica1a85a14e7b116275e3571332b2e90d7bc44c45
In our text to mp4 tests, we used the same sample id for each sample,
this changes it so that each sample (within a single test) has a
unique id.
This is done in preparation to look for the ids in the created
media samples.
Change-Id: I3215a6f09279af8f40e1ce8a959e0a522a811173
The previous text to mp4 webvtt pipeline was incomplete. It
did not insert ad cues and it could only insert a segment
after a sample ended.
Now the pipeline supports ad cue insert and segment insertion
mid text sample. This required the pipeline to use the text
chunker (to split samples and insert segments) and required
a major overhaul of the text to mp4 converter.
Before the converter came before the chunker. This meant that
the converter only expected to see stream info and text samples.
Moving the converter after the cue aligner and chunker means
that the convert had to be aware of segments and cues.
The general approach is the same, however the converter will
convert the samples per-segment as the chunker will introduce
duplicate samples if a sample spans across segments.
Closes#362Closes#382
Change-Id: I0f54a40524c36a602ad3804a0da26e80851c92fd
Renamed all the files called "webvtt_output_handler*" to
"webvtt_text_output_handler*" to better reflect the class name
in them.
Change-Id: I977bab362076974a124f263bcefff716ed8b6a0f
We don't want to allow any handler to be copyable or assigned-over
so this change enforces that for the webvtt output handler.
Change-Id: Ie0d59d6dbfb7a5e00bb4dd1422cd696d1a2d6072
Before, the webvtt output handler was written so that it could
share code between a segmented and non-segmented handler. As
we are not worried about that right now, this change simplifies
the handler to just be about segmented output.
Change-Id: I29dbc4e3a4ffbeb7ea10e23db489ee74b398a6c4
The Cue class was from a previous WebVTT implementation and
is not used in the current implementation. It was missed when the
other classes were removed. This change removes it.
Change-Id: I661ab3fcd80b5e5ef98b5213746b341a4028d1a1
When originally implementing the webvtt parser, there was a
misunderstanding in what the BOM was suppose to be
(https://en.wikipedia.org/wiki/Byte_order_mark). This corrects the
misunderstanding.
Close#397
Change-Id: I250d392db228e5e9b86684614b57adc5d8a4e5fe
To ensure that we can parse content with style and region blocks,
this change updates the parser to skip those blocks so that we
can still parse the cues from a file.
Full style and region support will be added later this year.
Issue #380
Change-Id: I11b8fd862a108c27a5c67b15d4703532b44a1214
The WebVtt Output Handler did not recognize cue events. This change
allows the handler to accept the events and tell muxer listener
about them.
Issue #362
Change-Id: I7c3318b72e539adc19af587c8e213fdb0af8290b
Created a media handler to come after parsers that will handle filling
in gaps between text samples. The padder takes a min duration, and if
the samples do not cover the min duration when flushed, one last empty
sample will be injected so that the samples will go up to the min duration.
Change-Id: I88605059664d09279676edac418ff3d4990d7556
Move the webvtt segmenter to the chunking directory so that it
can be converted to a general purpose text chunker.
Change-Id: I9ecd7ee39cb73070dab07b64f65ef24af1404813
Now that we have the end-to-end tests, we no longer need the webvtt pipeline
tests to verify that it is working.
Change-Id: I4ebec34e66eda67c40999d8802b447e2551e1fa6
We have an assert that ensures that the end time is greater than
the start time for any cue. However we never checked that cues
had a non-zero duration when parsing them.
We will throw away cues with a duration of zero (and print a
warning message) as they are not spec compliant.
Closes: #335
Change-Id: I404e8f3a5a8d43eff75a2554db3e38e8d340f421
When a gap is found in the text stream, the WebVtt to Mp4 converter will
now output the special empty vtt cue.
Change-Id: I8be88c6b7589aa120a2215e1e4b8e98031fe326d
Closes: #324
Adding all the code needed to allow the webvtt to mp4 converter to
send empty vtt cues. This change does everything except writing the
mp4 box.
Bug: #324
Change-Id: I16188e6357632b2ed06f7e9bab7844f093266696
Instead of always tracking segments with an index, this change makes a struct
that will act as the segment and track which segments are in it. Each
segment will store all the samples in the order they were given, it will
avoid any sorting.
Closes: 72867775
Change-Id: Ic5829161510fe8f3320d960c3bc4a276c26ff3be
Create WebVtt test that shows that the current implementation of the
webvtt segmenter does not respect the input order of cues.
Bug: 72867775
Change-Id: I811b3a93c10650e0cf9290c9c0c1680f562deb30
According to the HLS+WebVTT spec, if there is no text in a segment
a webvtt file with no cues can be added to the manifest. By outputting
empty segments it allows the accumulated duration in the Master Playlist
to better represent the duration of the text stream.
Spec Reference: //tools.ietf.org/html/draft-pantos-http-live-streaming-23
Section 3.5. WebVTT
Bug: #205
Change-Id: I5de01200fd9fa99c57949c773e8ee926b0f6ba8a
Use a mock muxer listener so that we can verify that the webvtt
output handlers will write to a manifest correctly.
Change-Id: I0294a998bfaf06a6d8f7d4c287fb014839b38f73
Connected the WebVtt Pipeline together to test that the parser,
segmenter, and output all work together as expected.
Change-Id: I07138f7b5b1318f84c27c5b607d8df207c57ddb3
- Update curl to 7.57.0
- Roll clang, which is needed due to MacOS / XCode update
- Fixes and suppress compilation errors due to clang update
Fixes#285
Change-Id: Ibac3288c641861605c3c0500d34d27373e6eecfe
This change introduces handlers to output WebVtt text files. There is
only one output but there is a common base to support others.
WebVttOutputHandler which handles all communication with other handlers
and WebVttSegmentedOutputHandler is responsible for listening for events
and choosing when and where to write cues and headers.
Bug: 36138902
Change-Id: I2b13a94262554398e66fee8cf024aa21041ddbab
Instead of having multiple char readers, one for strings and
one for files, just have one for files and use memory files
when testing.
Change-Id: Id1a2230046ba540ddf69ca10edb3edc74d2419b6
To better align with the Chunking Handler, the Text Segmenter
now outputs the SegmentInfo at the end of the segment rather
than the start.
Change-Id: If69ab951947d00779b4b63a52c4b6662bbdc4c0d
Implemented a MediaHandler that takes text samples and creates
media samples. The data in each media sample is the MP4 box for
non-overlapping cues.
As per WebVtt in Mp4, all cues must be non-overlapping. This handler
takes care of grouping and dividing cues.
Bug: 36138902
Change-Id: I0c1d27964180c14a22cb200591f70e46e04a651f
This change creates the webvtt segmenter which will be used for
segmented text webvtt for HLS. It takes a stream of text samples
and injects segment info messages based on the segment duration.
It is possible for samples to extend between segments, if so the
sample will appear twice (once in each segment).
Change-Id: Iae0134ee61cf269948026086520b6d3f8ce3785b
Took the WebVTT Media Parser and created the WebVTT Parser
that will take in a file and output a stream of cues that
will later be passed to another Media Handler that takes in
cues and chunks them.
Bug: 36138902
Change-Id: Ic77813fe19678e85d500269e69f46917510ab7ec
Seeing some failures on some platforms when compiled with clang
disabled:
GYP_DEFINES="clang=0" gclient runhooks
Several changes to make it work:
1. Mark packager code with packager_code=1 in GYP definitions.
2. Disable a few checks in non-packager code, which we do not have
direct control: dangling-else, deprecated-declarations,
unused-function
3. Fix the relevant errors in packager code.
4. Revert HAVE_STROPTS_H in curl config which is not available in
all linux distributions.
Fixes#286Fixes#293
Change-Id: I729b41f99403c5ad9487c6cc4a7dc06f6323cef8
Implemented the other end of the webvtt timestamp parsing as it will
be needed when we write out WebVtt files. Also changed the name of
the parse function to be more inline with the writing function.
Change-Id: I1f36ddbbf80028732b4cb1b15e871dec17767f63
Joey Parrish
Aaron Vaage
KongQun Yang
Haoming Chen