An updated version of PR #1027
That previous PR was done using 2021 code, and there were many changes
in the codebase from there, so a rebase was needed and also some minor
tweak here and there. But it's the same code, just reimplemented on a
newer codebase.
If you want to take a look at this in action, after building shaka
packager with this PR's code included, try this commands in 3 different
simultaneous bash sessions:
1. Video UDP input: `ffmpeg -f lavfi -re -i
"testsrc=s=320x240:r=30,format=yuv420p" -c:v h264 -sc_threshold 0 -g 30
-keyint_min 30 -r 30 -a53cc 1 -b:v 150k -preset ultrafast -r 30 -f
mpegts "udp://127.0.0.1:10000?pkt_size=1316"`
2. WebVTT UDP input: `for sec in $(seq 0 9999) ; do printf
"%02d:%02d.000 --> %02d:%02d.000\ntest second ${sec}\n\n" "$(( ${sec} /
60 ))" "$(( ${sec} % 60 ))" "$(( (${sec} + 1) / 60 ))" "$(( (${sec} + 1)
% 60 ))" ; sleep 1 ; done > /dev/udp/127.0.0.1/12345`
3. shaka packager command line: `timeout 60
path/to/build/packager/packager
'in=udp://127.0.0.1:10000?timeout=8000000,stream_selector=0,init_segment=240_init.m4s,segment_template=240_$Number%09d$.m4s,bandwidth=150000'
'in=udp://127.0.0.1:12345?timeout=8000000,stream_selector=0,input_format=webvtt,format=webvtt+mp4,init_segment=text_init.m4s,segment_template=text_$Number%09d$.m4s,language=eng,dash_roles=subtitle'
--mpd_output ./manifest.mpd --segment_duration 3.2
--suggested_presentation_delay 3.2 --min_buffer_time 3.2
--minimum_update_period 3.2 --time_shift_buffer_depth 60
--preserved_segments_outside_live_window 1 --default_language=eng
--dump_stream_info 2>&1`
Note the added `input_format=webvtt` to the shaka packager command's
second selector. That's new from this PR. If you don't use that, shaka's
format autodetection will not detect the webvtt format from the input,
as explained in
https://github.com/shaka-project/shaka-packager/issues/685#issuecomment-1029407191.
Try the command without it if you want to.
Fixes#685Fixes#1017
---------
Co-authored-by: Daniel Cantarín <canta@canta.com.ar>
Replaces #1181
* Add support for EBU Teletext input following Level 1.5 of the core
specification ETSI EN 300 706 V1.2.1 (2003-04).
* Add support for webvtt in MP4 segments output.
Closes#272
---------
Co-authored-by: Marcus Spangenberg <marcus.spangenberg@eyevinn.se>
This is based on comments at
https://github.com/google/shaka-packager/pull/891. The muxer is deciding
whether to write to a single file or a segment file based on the
configuration.
Example:
```
../packager 'in=TOS.ts,stream=video,output=tos_video.ts,playlist_name=tos_video.m3u8' \
'in=TOS.ts,stream=audio,output=tos_audio.ts,playlist_name=tos_audio.m3u8' \
--hls_master_playlist_output tos.m3u8
```
Tested the content using Exoplayer.
---------
Co-authored-by: Cosmin Stejerean <cstejerean@meta.com>
feat: Added audio specific configuration udts box to AudioSampleEntry
for MP4 input/output. DASH tags for DTS audio as specified in ETSI TS
103 491 and ETSI TS 102 114.
Closes#1301
---------
Co-authored-by: Cosmin Stejerean <cstejerean@meta.com>
Part of https://github.com/shaka-project/shaka-packager/issues/369
This adds read support for some MPEG-TS PMT elementary stream
descriptors:
- ISO639 Language Descriptor providing language code and audio type
- Maximum Bitrate Descriptor providing peak stream bandwidth
Those metadata are propagated to StreamInfo structures:
- StreamInfo.language field
- AudioStreamMetadata.max_bitrate field for audio streams
- audio type is currently not propagated - corresponding field has to be
added to AudioStreamMetadata
Test vector file containing those descriptors is provided.
A positive value, in milliseconds. It is the threshold used to determine
if we should assume that the text stream actually starts at time zero.
If the first sample comes before default_text_zero_bias_ms, then the
start will be padded as the stream is assumed to start at zero. If the
first sample comes after default_text_zero_bias_ms then the start of the
stream will not be padded as we cannot assume the start time of the
stream.
The fix in #1289 was not complete and left the fake clock as null which
didn't have any effect. This was revealed by integration tests showing
mismatches in the timestamps in MP4.
This work was done over ~80 individual commits in the `cmake` branch,
which are now being merged back into `main`. As a roll-up commit, it is
too big to be reviewable, but each change was reviewed individually in
context of the `cmake` branch. After this, the `cmake` branch will be
renamed `cmake-porting-history` and preserved.
---------
Co-authored-by: Geoff Jukes <geoffjukes@users.noreply.github.com>
Co-authored-by: Bartek Zdanowski <bartek.zdanowski@gmail.com>
Co-authored-by: Carlos Bentzen <cadubentzen@gmail.com>
Co-authored-by: Dennis E. Mungai <2356871+Brainiarc7@users.noreply.github.com>
Co-authored-by: Cosmin Stejerean <cstejerean@gmail.com>
Co-authored-by: Carlos Bentzen <carlos.bentzen@bitmovin.com>
Co-authored-by: Cosmin Stejerean <cstejerean@meta.com>
Co-authored-by: Cosmin Stejerean <cosmin@offbytwo.com>
As per the AV1 spec, the codec string may contain optional color values.
This extracts the missing color information from the mp4 `colr` atom, if
present, and generates the full AV1 codec string.
Closes#1007
In many places, we used std::numeric_limits without including the
proper header. This would build on some Linux distributions, but not
others.
This adds the missing includes, fixing the build on Fedora, among
other distros.
Change-Id: I63e9e37e5973fe23bbdf9868552db51062b1dae4
## The issue
- With LL-DASH mode enabled, the gap size warning was hit and printed to the console every time a new segment was registered to the manifest.
- This occurred because the first chunk's size and duration were being stored for each segment, rather than the full segment size and duration. Note, only the first chunk's metrics are known at first because in low latency mode, the segment is registered to the manifest before it is finished being processed and written.
- Because of this, the gap size check was comparing the end time of the first chunk in the previous segment to the beginning time of the current segment, causing the check to fail every time.
## The Fix
- Update a low latency segment's duration and size once the segment file has been fully written.
- The full segment size and duration will be used to update the bandwidth estimator and the segment info list.
- Updating the segment info list to hold the full duration is necessary for satisfying [the gap size check found in Represenation.cc](https://github.com/google/shaka-packager/blob/master/packager/mpd/base/representation.cc#L391).
- NOTE: bandwidth estimation is currently only used in HLS
# LL-DASH Support
These changes add support for LL-DASH streaming.
**NOTE:** LL-HLS support is still in progress, but it's coming. :)
## Testing
`./chunking_unittest --gtest_filter="ChunkingHandlerTest.LowLatencyDash"`
`./media_event_unittest --gtest_filter="MpdNotifyMuxerListenerTest.LowLatencyDash"`
`./mpd_unittest --gtest_filter="PeriodTest.LowLatencyDashMpdGetXml"`
`./mpd_unittest --gtest_filter="SimpleMpdNotifierTest.NotifyAvailabilityTimeOffset"`
`./mpd_unittest --gtest_filter="SimpleMpdNotifierTest.NotifySegmentDuration"`
`./mpd_unittest --gtest_filter="LowLatencySegmentTest.LowLatencySegmentTemplate"`
Note, packager_test must be run from the main project directory
`./out/Release/packager_test --gtest_filter="PackagerTest.LowLatencyDashEnabledAndUtcTimingNotSet"`
`./out/Release/packager_test --gtest_filter="PackagerTest.LowLatencyDashEnabledAndUtcTimingNotSet"`
This converts all time parameters to signed, finishing a cleanup that
was started in 2018 in b4256bf0. This changes the type of:
- timestamps
- PTS specifically
- timestamp offsets
- timescales
- durations
This excludes:
- MP4 box definitions
- DTS specifically
This is meant to address signed/unsigned conversion issues on arm64
that caused some test cases to fail.
Change-Id: Ic752a20cbc6e31fea6bc0894d1771833171e7cbe
It is not working correctly in gcc 4.8 or earlier, which is still
popular (bundled by default in CentOS 7).
Issue #865, #929.
Change-Id: I136446a70831bd0237cd29646dd349fe7558176b
Legacy players, e.g. older versions of ExoPlayer, do not handle default webvtt text alignment correctly. Need to specify `align:center` explicitly cues without text alignment for backwards compatibility.
Fixes#925.
It is not working correctly in gcc 4.8 or earlier, which is still
popular (e.g. bundled by default in CentOS 7).
Fixes#865, #929.
Change-Id: I55a42428dbd2a12fc2c3b1e6a49fdd662a295dca
This also allows setting the language of different text streams from
the same input. Multiple streams can use the same input stream
using different cc_index values and can each use a different language.
This also will try to pull the language from the input if not
specified.
Change-Id: I7078710b509b7d77dad8cb4299a82f954af7e9e7
Note that this only supports a single page within the DVB-sub stream.
Multiple pages will be merged together. A follow-up will allow
selecting a specific page.
This only supports outputting using TTML or MP4+TTML; you cannot have
DVB-sub output nor can you output it in WebVTT. Since DVB-sub
uses images, it is hard to impossible to do this with WebVTT.
This also only supports interlaced images, not progressive images
nor text.
Closes#832
Change-Id: Id6dbb6393c7b9a05722e61c6bd255bef5e69a7d8
Issue #149
Co-authored-by: Andreas Motl <andreas.motl@elmyra.de>
Co-authored-by: Rintaro Kuroiwa <rkuroiwa@google.com>
Co-authored-by: Ole Andre Birkedal <o.birkedal@sportradar.com>
I.e. the flag --generate_sidx_in_media_segments,
--nogenerate_sidx_in_media_segments work for both single-segment
and multi-segment mode with this change.
Related to #862.
Change-Id: Icd27fd00e8e036ba0c4709b48650372429cc0351
The reference count in 'sidx' box is a uint16 field, which allows at
most 0xFFFF entries, i.e. at most 0xFFFF subsegments, which is roughly
18 hours for one second segments.
Do not fail packaging when it happens. Instead, generate a warning and
truncate the number of references to 0xFFFF instead.
Note that the actual number of mp4 fragments in the mp4 file can still
be more than 0xFFFF. The stream will not play to the end in DASH, but
it will play successfully in HLS.
Workarounds #862.
Change-Id: Ib3930418d1528df1f9ea64cda0d0ebaa78d26abb
This also changes the callbacks a bit to (a) avoid passing references
for already ref-counted types, and (b) don't pass PID since the
parent knows this and gives it to the child parser.
Issue #832
Change-Id: I7dd44436c8d1ad81d42a813d16f850175b85ad1a
Cosmin Stejerean
wjywbs
Daniel Cantarín
sr90
Roy-Funderburk
modernletter
SteveR-PMP
Joey Parrish
Caitlin O'Callaghan
Prakash Duggaraju
Marcus Spangenberg
Bartek Zdanowski
Vishal Shah
Joey Parrish
nvincen
Mattias Wadman
KongQun Yang
Jacob Trimble
Sergio Garcia Murillo
JPeMu
Ole Andre Birkedal