- WebVttMediaParser uses WebVttSampleConverter to generate non
overlapping media samples.
- The media samples contains ISO BMFF boxes.
- Add kCodecWebVtt to signal that the media is webvtt and
the samples will be in ISO BMFF boxes.
Change-Id: I639902cdba7b04af75428bc20622e26b8203cfb2
- Also sets up the packaging and verify it works.
Some of the changes are temporary to get the integration going.
Change-Id: I0cf6c379d185e157808acabb9ef58ff93d4a39ae
The spec actually requires all NAL units to be escaped, so there
is no need to escape it again.
NAL byte stream is one demarcation method; NAL unit stream is another
demarcation method. Regardless of the demarcation method used, the
requirement for NAL unit is the same. See the last paragraph of
7.4.1 NAL unit semantics on the requirement on emulation prevention bytes.
Change-Id: Icc63fcc5cf965632e331f5af5f673164c7c1663a
CENCv3 recommends only encrypting video data in slice NALs. Slice
data partition NALs should not be encrypted.
In the code, differentiate is_vcl and is_video_slice. They are the
same for H265; for H264, vcl NALs include slice data partition NALs
but video_slice NALs do not.
Change-Id: I91f4bdd76d25f0eac50e39aed350ebce3f667121
- Logic for splitting up WebVTT cues into MP4 samples.
- For any cue intervals that overlap, a new sample must be created.
Change-Id: Icf7478f42d8c5790bf6f404d512c1251dd34c405
- Deprecated command line flags --profile and --single_segment.
'segment_template' in stream descriptors implies live profile
and non-single segment.
- Added flag --generate_static_mpd_for_live_profile to generate
static mpd for live profile; if not set, dynamic mpd will be
generated.
Close#142
Change-Id: I78879297ed118f0f246c4753a16ad125bd6b5e4f
1. Allow encryption pattern of 0:0, which is treated as 1:0;
2. Remove the special handling of pattern 1:0 in pattern cryptor
which may not always be correct;
3. Allow senc/saio/saiz boxes to be absent.
Change-Id: I372e61182ec577107e39cb601c3aed80616b036d
The original code creates temporary file in the current directory,
which may not always be writable.
Change-Id: Icc278dd5db6be6206ae29defbb7423bae39cc978
Cues used to be generated in the end of the file; if http range
request is not supported, clients have to download the whole
file to get to the cues.
This CL updated TwoPassSingleSegmentSegmenter to write cues
after writing webm header.
This CL also updates libwebm dependency to latest.
Closes#159
Change-Id: Ic73548e1b872e6b13a37627707e7d0ff3e556877
The original code accumulates sample durations in seconds (double)
and then generates new segment / cluster by comparing the accumulated
value with configured value.
There may be loss of precision when accumulating values in double.
For example, with a GOP of 96 frames and frame rate of 24 fps; the
accumulated frame duration for 96 frames is 3.999999999999, which is
very close to 4.0 but not 4.0. Problem would arise if segment
duration is set to 4. The created segments would have a duration of
8 seconds instead of 4 seconds.
The new code accumulates sample durations in uint64_t relative to
input time scale; the configured segment duration will be converted to
timescale for comparison. This avoids loss of precision.
Change-Id: I3ae24be82a7ce45f923a6f90fea495b8b6b2e7ef
- Also regenerated test content to insert an iframe every one
second: ffmpeg -i source.webm -auto-alt-ref 1 -g 30 out.webm
This makes sure the content is actually encrypted with one
second clear lead in end to end test.
Change-Id: I488143c148e2d6c45ba1586f6d0d835dc46db86e
- Add decrypt_config in media sample and stream.
- Update subsamples when converting NAL unit to bytestream.
Change-Id: I7b8975a453f81b22cf74bee3c9a58b7e458cbaae
1. Replace STLDeleter with unique_ptr in container, which is
supported in C++11
2. Replace string_as_array with &string[0] which is guaranteed
to work in C++11
Change-Id: I7f39c0e51fc8a3fcbb41313094a0ca6b33db7bf3
In H264, there may be multiple consecutive video slice NAL units
in the same frame. The original code assigns a new access unit
for every video slice NAL unit, which is incorrect.
Fixes#134.
Change-Id: I4d44271df48cb08867ddd02f7494fb3573af3356
Mimic iso-bmff behavior: either all the samples in a segment are encrypted
or all the samples are clear.
Change-Id: I03bdbbf5a4b690f4d87c4dceb0f8155e6fae941e
The right way to detect the presence of a keyframe in a BlockGroup
is to look for the absence of the ReferenceBlock element [1].
Closes b/30433206
[1] https://matroska.org/technical/specs/index.html#ReferenceBlock
Change-Id: I2b3c8704cbabcd5cbee38448e5528425865561a4
This flag is needed to workaround the Chromium bug
https://crbug.com/398130, which uses decoding timestamp
in buffered range.
Closes#113
Change-Id: Ib8f18be7165dd968bdc36c18ce29f694235c0c26
- Add MuxerListener::OnEncryptionStart() for notifying that further
segments are encrypted.
b/29621230
Change-Id: I881b29d55baaf3d04e005a3b95d898071c3f272b
- Cannot include PMT for following encrypted segments in the clear lead.
Some players consider them as conflicting codecs.
- Add EXT-X-DISCONTINUITY in front of first EXT-X-KEY to notify that the
codec is switching from e.g. "avc1" to "zavc".
b/29621230
Change-Id: I45c74813630c229d66245e992eb3a5117326bb14
Before, we converted the WebM configuration to MP4 in the video
client, however this lead to a bug when fields were missing. So
now don't convert until the cluster parser so the extra info from
the stream can be added.
This also fixes a bug where the value was not printed in the warning
logs.
b/29580732
Change-Id: If0a1a4d135f98292cdaae15a11027f42d844e85d
Since the |extra_data| field contains codec-specific configuration
data, it makes sense to call it |codec_config|.
Change-Id: If9e35165a00fe82628cf931df397a8ef06505b0d
Although superframe index is not encrypted, it should still be inserted
into subsamples list (with cipher_bytes as 0).
Change-Id: I06b38f8333a22a31a71cd67e0412218dd3aaa5c3
- Tracks other than video are protected using whole-block full-sample
encryption as specified in ISO/IEC 23001-7:2016(E) 9.7, which is
equivalent to a pattern of 1:0. This is different to the non pattern
encryption counterparts.
- Also updated the code to allow the existence of other protection
schemes in the original content, which will simply be ignored.
- The internal cryptor used by AesPatternCryptor should not use
constant iv, add a DCHECK for that.
- Optimize AesPatternCryptor handling on the special pattern 1:0.
Change-Id: Idc704e7bc6b347741336f38c6d3620fc19392960
This is part of the effort to support Opus in iso-bmff #83.
Changes in this CL:
- Add support for multiple SampleGroupDescription and SampleToGroup
boxes in TrackFragment box;
- Add support for SampleGroupDescription and SampleToGroup boxes
in SampleTable box;
- Add support for AudioRollRecoveryEntry in Sample Group and 'roll'
sample grouping type;
- Also fix a bug that default length was not set correctly in
SampleGroupDescription when constant iv is used.
Change-Id: I7e31386ea6cd17a8ee5e1dca4c1a90937d51368f
- For encrypted segments, PMT specified by SAMPLE-AES specification is
generated.
- Remove time_scale_ field from TsWriter. It is not used.
- Move ContinuityCounter to a separate file.
- Add ProgramMapTableWriter and implementations.
- continuity_counter is incremented for PAT and PMT.
Change-Id: If0dd0990203cb6990f39a6832048bdc3ff08decd
This add several unit tests for EsParserH26x to test the various
NAL unit orders and access unit contents. Some tests are disabled
and will be fixed in another patch.
Change-Id: Id5e3291e22f1fe17ada2c03c42e2cdfe226abcb2
- BytesOfProtectedData in 'cens' SHALL also be 16-byte aligned
- Fix an incorrect box definition bug w.r.t to 'cbcs' and 'cens'
- Also add various protection scheme tests
Close#77Close#78
Change-Id: I63c8d8b01ce16ed60affa97ec95fc62bc2da06df
Replaces the InitializeFromH264 and InitializeFromH265 methods with
a single Initialize method that accepts a CodecType. Also moves the
CodecType enum from NaluReader to Nalu.
Change-Id: Ie33aa9c0d772a7f3c6a2e9c867e25be3edfe7828
- CBC cryptors should accept IV of size 8 bytes - it will be zero
extended to 16 bytes.
- Fixed iv() not updated problem in AesPatternCryptor.
- Replace kChainAcrossCalls with ConstantIvFlag enum flags.
Change-Id: I3fb4de0e8abbe891e6271e779373ba53f8df660d
- Sample duration wasn't scaled in TsSegmenter to calculate the current
segment's length. So segmenting length did not always respect
segment_duration.
Change-Id: I1ef4747dbd12bde7852ffcbceb971f2775aa18b3
Now Finalize() will close all the files used by the segmenters. This
is important to allow WebMMuxer::FireOnMediaEndEvent to get the
correct size of the media file.
This also changes the WebM muxer to use 64-bit numbers for the init
and index ranges to correctly support >4GB files.
b/28194272
Change-Id: Ia84e4a4b0756f89644efea99a1a51968b22a1338
- Add hls_name and hls_group_id fields to MuxerOptions. This is used to
pass the NAME and GROUP-ID values for EXT-X-MEDIA tag to
MuxerListener.
- Change MuxerListener::OnEncryptionInfoReady() to take an
initialization vector.
- Change MuxerListener::OnNewSegment() to take segment name.
- Reworded and formatted MuxerListener comments to Doxygen style.
Issue #85
Change-Id: Iea06e68552a56ae180177ffd6ca315a7cf39456c
- crypt_byte_block and skip_byte_block for pattern-based encryption.
- constant_iv for constant iv (used by 'cbcs' protection scheme).
- Also renamed iv_size to per_sample_iv_size.
- Also changed "bool is_encrypted" to "uint8_t is_protected" to align
with CENC spec.
Issue #78
Change-Id: I2878a91e0ebe536a08a3e3109daf157fe4440e27
- Remove EncryptionMode enums
- Remove AesEncryptor::InitializeWithRandomIv, replaced with
a static function AesCryptor::GenerateRandomIv, which should
be called to generate the iv if the iv is empty.
This change is to prepare support for CBCS and CENS pattern-based
protection schemes.
Issue #77
Change-Id: Icba35089d6e451cbea7ebbf5dd5674079f206390
- FOURCC is not a mp4 only concept. It is also used elsewhere.
- RCHECK has been used outside formats/mp4.
Also updated the FOURCC enum names to match the actual fourcc code, e.g.
FOURCC_mdat for "mdat".
Change-Id: I5be02f12695882c0fb41d359305fb8ec01303a06
- Create AesCryptor class as the common base
- AesCryptor::Crypt function will serve as an Encrypt function for
encryptor and a Decrypt function for Decryptor.
Change-Id: Ie91fb14964b5091786705bf510656f40d73af160
- Simple implementation of MPEG2 TS muxer.
- This does not take MuxerListener so a manifest cannot be generated.
- Encryption is not supported.
Issue #84
Change-Id: I117b772dbbce5437398defbd564883ad758916d5
- Segmenter should not finish a segment unless the next sample is a key
frame.
- Renamed PesPacketGenerator::Finalize() to Flush().
- Use duration from the sample instead of the one copied to PesPacket.
- Remove duration field from PesPacket.
Issue #84
Change-Id: Icd90e65fd63fdeb955e7abac3473b0b54db6ac4a
- Multi-file segmenter implementation.
- The samples are passed to PesPacketGenerator to generate PesPackets.
PesPackets are passed to TsWriter to write them to file.
Issue #84
Change-Id: Ia4cae2abe2e7df46016dcdb791baaab2818aea03
The positions in the SeekHead element should be relative to the
Segment payload, not the start of the file. Also added entries for
Tracks and SegmentInfo.
Change-Id: Id692da25fffc27d78e9f1a06d061431aeb6f1e7c
- Optimize and clean up encryption and decryption code.
- Consolidate various CBC encryption/decryption schemes into a
common class.
- Make it a constructor argument whether cipher block chain is
continuous across Encrypt/Decrypt calls.
- Also align protected region size as required in CENC spec.
Issue #77
Change-Id: I533d92ada3cd80933b532b9c3a1cca105ba66f8e
This adds a preliminary H.265 parser. The parser only support
reading the slice header. This also attaches the H.265 parser to the
VideoSliceHeaderReader so H.265 frames can have unencrypted headers.
Issue #46Closes#40
Change-Id: I8b98e1f8bb04e359d9bf896fd5b2939c326b196b
The new algorithm will parse NAL unit header and only starts a new
NAL unit if it is valid, otherwise it will be considered part of
the previous NAL unit.
Closes#96
Change-Id: I45f2a0f37d51841ee8345d6d0d38fcda57e0a009
KeySource is now an abstract class that is implemented in two
types WidevineKeySource and FixedKeySource. This also updates
fixed key encryption to use v1 PSSH boxes with the common system
ID.
This also updates the --pssh argument. Now it accepts full PSSH
boxes rather than data. Multiple PSSH boxes can be concatenated
together.
Issue #88
Change-Id: I4bd0290f6d8b965f7d118f075c96e0f267d7e831
- Part 1.
- Add packager command line argument "protection_scheme" to specify
protection scheme. Plumb through packager code to enable CBC
encryption/decryption.
- Add scheme type "cbc1" to sinf.
- Refactor AES encryptor and decryptor.
- Need more work in the subsample handling.
Issue #77
Change-Id: I3a9304d89adf5efbfb226b6e805a3077b6cb8c68
* EncryptionKey now contains them rather than a PSSH box.
* Outputs PSSH boxes for each entry.
* Outputs a ContentProtection element for each entry.
* Removed SystemName and UUID from KeySource.
* Removed --scheme_id_uri packager argument.
Issue #88
Change-Id: I2651784c3220fd64f5b1773fdcd70285690cf8c0
When normalizing language tags to their shortest form, we need to
split off subtags and treat them as separate components that do not
get changed.
Furthermore, MP4 can only store language tags without subtags. So
only store the main language in MP4 output.
Fixes b/27533973
Change-Id: I96049e274aae9841e321c53039ef6464a2e61574
Add another overload to fetch by key ID directly, used by WebM.
Changed the one using PSSH data in favor of the entire PSSH box.
This also moves the Widevine proto to media base. Now, the
Widevine key source handles creating the Widevine specific PSSH
data.
Change-Id: I6f4633facad39207809ffbad970635d1f9d70983
This moves pssh parsing to its own class in media base. This type
can be used to parse and generate pssh boxes. This new type also
supports both v0 an v1 boxes.
This also modifies the pssh box definition to only have the |raw_box|
and moves all pssh parsing and handling into mp4 media parser.
A follow-up change will replace the remaining usages of 'raw' pssh
box data with the new type.
Issue #88
Change-Id: Ic2436ecb5df8b3558b81e600dc095b0efd122ab1
Now the AVCDecoderConfiguration and HEVCDecoderConfiguration classes
will read the Nalu from the blocks, meaning they will store a
vector of Nalu objects for the data.
Also added H.265 to the Nalu class and added argument to NaluReader
to read H.264 vs H.265 Nalus.
Change-Id: I8d8194a90fd72a30af66e9776e01379f8428542c
This member refers to the size of the payload (the data after the
header). Since the pointer is called |data|, calling this size
|data_size| is confusing.
Change-Id: I9174cf6c5c402beddaebbce7c16514470ba0c3da
Now the Nalu data pointer points to the start of the NALU header
rather than pointing to the start code. Added a new method on
NaluReader to check whether the stream starts with a start code.
Change-Id: Ifaecbe0c911aa5cffdf0a966028e6cada8621cc3
For non-video slices, the data is not encrypted. This also skips the
frame headers for H.264; support for H.265 will be added later.
Issue #40
Change-Id: Id0cb0fb9ddb6adedf63ef4aef6b3a26260a21654
Removed the code for NALU splitting in the H.264 parser and moved
it to its own class. Also added support for length-prefixed
NALU splitting for use with the encrypting fragmenter.
Change-Id: I1e91266681f1b117fb2382cf80590651efc06619
Parse channel layout value from dec3 box. Pass it through audio stream
info. MPD builder forms audio channel configuration to signal ec-3
codec.
Specs: 1) ETSI TS 102 366 V1.3.1 Digital Audio Compression (AC-3,
Enhanced AC-3) Standard E.1.3.1.8.
2) DASH-IF Interoperability Points v3.0 9.2.1.2.
Issue #64
Change-Id: Ia2c22dd3d82e757ba5a88ba1de35c5d593f5005e
Before this change, the media file will fail to be parsed if it contains
non-wvtt text streams. This change allows demuxing of video and audio
streams in these media files even though the text stream is ignored.
Fixes#74.
Change-Id: I7ef108a51125c4965fe48c39efe9638f3a0e4759
This also changes the way frames are written in the WebM muxer. Now,
frames are stored and written on the next call to AddSample. So each
call to AddSample will write the previous frame. This is needed to
determine whether the given frame is the last one in the cluster.
Closes#70
Change-Id: Ic69ebad3c4729cdaa2017c9c7f497048501ac907
When generating ninja files we end up with two libwebm targets.
packager/media/formats/webm/webm.gyp:webm -> becomes target libwebm
packager/third_party/libwebm/libwebm.gyp:libwebm -> becomes target libwebm
Solve this conflict by renaming libwebm.gyp:libwebm to mkvmuxer.
On Linux the generated ninja files use path/libbase.a as target name.
In the Mac ninja file the target is just libbase.a.
As we have two libbase.a (base/base.gyp and media/base/media_base.gyp) the linking stage fails to include both libs.
Solve by renaming media_base.gyp's base target to media_base
For WebM contents, it is possible that we may receive some NewSampleEvent
before receiving ParserInitEvent. This is because init event is fired
after analyzing a video block which could come after an audio block.
Also modified Flush() function to return a bool to indicate whether the
the flush is successful and whether the samples are handled correctly.
And added macro to ensure Flush() and Parse() results are handled.
Fixes#71
Change-Id: I2294d6f529f54e4578344916559bb1bc116c745a
- Also refactor decryptor management code out of mp4_media_parser.cc
- Move decryptor managment logic to DecryptorSource class to make it
available for webm as well
- Remove data_offset member from DecryptConfig which is not useful
- Add widevine_pssh_data.proto file
Closes#72
Change-Id: I1d32baf4013ebd3382b5372c7433fae5033a260e
- dts was not set earlier, although for WebM, we could assume that
dts is the same as pts.
- Calculate block duration with the difference with the next block
if duration is not encoded, even if track default_duration is set.
- Use track default_duration as a duration estimate for the last
block.
- This also removes opus duration computation from encoded data.
Issues #67, #68
Change-Id: Icaa2769dcb2a89269ae014f44ad6a9262770aed2
- Box definitions for box type DEC3.
- Parser/muxer changes to support Enhanced-AC3 audio codecs.
- MPD signaling will come in Part 3.
Issue #64
Change-Id: Ifcd5efa1f61b470ec225127925631e4329853259
This does not support key-rotation and will give an error. This is
because WebM does not have a way to indicate a change in key ID using
media segments.
b/22463551
Change-Id: I9b3dac818dc370302a5afc0d25d8a060b64d30cd
Added packager tests for WebM audio. Also now only outputs the
language if it's not empty. Fixed the packager tests for that.
b/26540606
Change-Id: Ica804bd710055bcaa2113f948d723dedd78ef909
- Box definitions for box type DAC3.
- Parser/muxer changes to support AC3 audio codecs.
- EC3 audio sample entry will come in Part 2.
- MPD signaling will come in Part 3.
Issue #64
Change-Id: I790b46ae8179b933bb8f7da9cdd38591fe8da43d
For mp4 outputs, a metadata box with version information is added to
moov box.
For mpd outputs, a text comment with version information is added in
the beginning of mpd file.
Issue #60
Change-Id: I783ba370781c0a8f77c910ff1172bad2e7edff75
- Another minor change in segmenter_test_base: scoped_refptr can
be passed by value, remove ".Pass".
Change-Id: I31f0cf74c5ad0aba8890d3b1845155d63d7326a0
* Changed Segmenters to accept StreamInfo rather than MediaStream
to help in testing.
* Changed MemoryFile behavior to mirror local file:
* Read non-existent file is an error.
* Write deletes any existing file.
* Fixed a bug in SingleSegmentSegmenter.
Change-Id: I339e35597ca4661b7a26c6fdbbfa2f9f511c7da0
- Parse vp9 bitstream to get vpx codec configuration
- Add subsample encryption for vp9
- Also fixed a bug in VP9 parser if segmentation update_map is enabled
Change-Id: I69dc97088aa38c94c6d37fdbcf3d9cfc942a3df6
- Add Box::WriteHeader and Box::HeaderSize methods. The concrete
box implementations should not need care about whether it is a
Box or FullBox normally.
- Rename Box::ReadWrite to Box::ReadWriteInternal to make it clear
that it is an internal methods. Make it private so it cannot be
incorrectly called in box implementions.
- Make an internal implementation of ComputeSizeInternal to compute
box size. |atom_size| is updated in ComputeSize, which wraps
ComputeSizeInternal.
Change-Id: I3fbcf8c527581b676d9d13f1ac1dd798da7c4d5f
* Added WebM muxer that supports both single and multi-segment modes.
* WebM muxer supports MPD generation.
* Enabled WebM muxer and demuxer in packager.
b/22463220
b/25089245
b/25089714
Change-Id: I9f6e8fc51e08fbb1d685229c5cb54ea60f7bed8f
Also update the code to generate CompressorName in VideoSampleEntry
for both AVC1 and various VP codecs.
Change-Id: I2355f8008a72806e852aa1ec6c80e9141b97d963
Rintaro Kuroiwa
KongQun Yang
Haoming Chen
Haoming Chen
Kyle Alexander
Thomas Inskip
Jacob Trimble
Bei Li
Joey Parrish
Anders Hasselqvist