# LL-DASH Support
These changes add support for LL-DASH streaming.
**NOTE:** LL-HLS support is still in progress, but it's coming. :)
## Testing
`./chunking_unittest --gtest_filter="ChunkingHandlerTest.LowLatencyDash"`
`./media_event_unittest --gtest_filter="MpdNotifyMuxerListenerTest.LowLatencyDash"`
`./mpd_unittest --gtest_filter="PeriodTest.LowLatencyDashMpdGetXml"`
`./mpd_unittest --gtest_filter="SimpleMpdNotifierTest.NotifyAvailabilityTimeOffset"`
`./mpd_unittest --gtest_filter="SimpleMpdNotifierTest.NotifySegmentDuration"`
`./mpd_unittest --gtest_filter="LowLatencySegmentTest.LowLatencySegmentTemplate"`
Note, packager_test must be run from the main project directory
`./out/Release/packager_test --gtest_filter="PackagerTest.LowLatencyDashEnabledAndUtcTimingNotSet"`
`./out/Release/packager_test --gtest_filter="PackagerTest.LowLatencyDashEnabledAndUtcTimingNotSet"`
This converts all time parameters to signed, finishing a cleanup that
was started in 2018 in b4256bf0. This changes the type of:
- timestamps
- PTS specifically
- timestamp offsets
- timescales
- durations
This excludes:
- MP4 box definitions
- DTS specifically
This is meant to address signed/unsigned conversion issues on arm64
that caused some test cases to fail.
Change-Id: Ic752a20cbc6e31fea6bc0894d1771833171e7cbe
This was introduced earlier to indicate FairPlay protection system. But
in fact, it is sufficient to just use the system id for the indication.
- Also updated various parts of the pipeline to support empty PSSH.
- Added an additional FairPlay end to end test using fMP4.
Change-Id: Ica48b7b5235e9a2b5a7f722bcd0fc1ef2073ac13
- EditLists in input files are parsed and applied to sample timestamps.
- An EditList will be inserted in the ISO-BMFF output if
- There is an offset between the initial presentation timestamp (pts)
and decoding timestamp (dts). Chrome, as of M67, still uses dts in
buffered range API [1], which creates various problems when buffered
range by pts does not align with buffered range by dts. There is
another bug in Chrome that applies EditList to pts only [2]. This
means that we can insert an EditList to align pts range and dts range.
- MediaSamples have negative timestamps (e.g. for Audio Priming).
You may notice the below change on some contents:
- Some media duration is reduced by one or two frames. This is because
EditList in the input file was ignored in the previous code, so video
streams start with a zero dts and a non-zero pts; the smaller of dts
and pts was used as the starting timestamp (related to the earlier
workaround for Chrome's dts bug), so the calculated duration was
actually a bit larger than the actual duration. Now with EditList
applied, the initial pts is reduced to zero, so the media duration is
also reduced to reflect the actual and correct media duration.
It may also result in negative timestamps in TS/HLS Packed Audio, which
will be addressed in a follow up CL.
Fixes#112.
Partially address b/110782437.
[1] https://crbug.com/718641, fixed but behind MseBufferByPts.
[2] https://crbug.com/354518. Chrome is planning to enable the fix for
[1] before addressing this bug, so we are safe.
Change-Id: I59317740ad3807ca66fa74b3a18fdf7f32c96aeb
It was implemented to workaround Chromium's DTS
https://crbug.com/398130, but the workaround does not really work in
all situations.
Remove it now as we already have another workaround available.
Change-Id: I291f559d78120fb743a6679b7d927e5bbc5b6b4e
EPT (earliest presentation time) may be adjusted not to be lower than
the decoding timestamp (dts), but the adjustment should only be done
on the first file when there is one file per Representation per Period.
The second file and onwards should not be adjusted otherwise a GAP
would be created.
Closes#384
Closes b/78517422
Change-Id: I56771ad8fbbe6a87b832ec58854cfbf37d5f1817
This is in preparation of supporting entitlement license API, where
common encryption server may return concatenated PSSHs directly.
Refactored ProtectionSystemSpecificInfo into a struct containing
concatenated PSSHs. This will make it easier to pass PSSHs around.
Also, most of the time, users of ProtectionSystemSpecificInfo do
not care what is in PSSH; so moved PSSH box parsing and building out
of ProtectionSystemSpecificInfo.
b/78171767
Change-Id: I1c4d5e7e23efd2f7d4b2b9704378323112e47f00
This is called when reaching end of the file of the media. The duration
of the media is updated.
Fixes#340.
Change-Id: I446f2d341b02125d4a7d8c958bda269b5403cb9c
- Add empty lines between different types of renditions to improve
readability.
- Group variants with the same audio/text group together, as it is
where the Adaptation occurs.
- Write master playlist after writing media playlists. This makes
more sense and it is also necessary to have the bandwidth of
the last iframe playist segment correctly computed.
- For fMP4, I-Frame segment must include the 'moof' header.
- Fix a problem that hls_iframe_playlist_name is not passed to
MuxerListenerFactory.
Issue: #287
Change-Id: Icf37c5de1dc29f85ae3f419cbc3264d04ca491a4
In prep for changes to Trick Play, we want to make all messages
copy on write so that if the same message is sent to multiple
handlers, it is not possible for one handler to change the data
another handler is using.
Change-Id: I554166ca11c532412e4dfced5603972ca24dc2bb
- Added flag --mp4_include_pssh_in_stream, default to true. If it is
set to false, the encrypted mp4 stream will not include pssh.
- Align BytesOfProtectedData to multiple of 16 bytes for cenc.
- Set TrackHeader flag to kTrackEnabled | kTrackInMovie |
kTrackInPreview
- Move mvex to after trak, required by HLS
- Add cmfc/cmfs compatible brands except for avc3/hev1, where CMAF
requires single initialization switching set which is not supported.
- Set duration to 0 in tkhd, mdhd, mvhd.
Also updated major_brand and compatible brands:
- Set major_brand to isom (iso-bmff media file format) and made dash
a compatible brand
- Replaced compatible brand iso6 with iso8 since we use sthd for text
tracks
Fixes b/36278260
Change-Id: I3cc5dd5aa1621714d517fe02fe3841d19a1a07f6
Also moved MediaHandler output validation to Initialize instead.
This CL also addresses #122 with consistent chunking.
Change-Id: I60c0da6d1b33421d7828bcb827d18899e71884ce
- Also sets up the packaging and verify it works.
Some of the changes are temporary to get the integration going.
Change-Id: I0cf6c379d185e157808acabb9ef58ff93d4a39ae
1. Replace STLDeleter with unique_ptr in container, which is
supported in C++11
2. Replace string_as_array with &string[0] which is guaranteed
to work in C++11
Change-Id: I7f39c0e51fc8a3fcbb41313094a0ca6b33db7bf3
This flag is needed to workaround the Chromium bug
https://crbug.com/398130, which uses decoding timestamp
in buffered range.
Closes#113
Change-Id: Ib8f18be7165dd968bdc36c18ce29f694235c0c26
- Add MuxerListener::OnEncryptionStart() for notifying that further
segments are encrypted.
b/29621230
Change-Id: I881b29d55baaf3d04e005a3b95d898071c3f272b
- Tracks other than video are protected using whole-block full-sample
encryption as specified in ISO/IEC 23001-7:2016(E) 9.7, which is
equivalent to a pattern of 1:0. This is different to the non pattern
encryption counterparts.
- Also updated the code to allow the existence of other protection
schemes in the original content, which will simply be ignored.
- The internal cryptor used by AesPatternCryptor should not use
constant iv, add a DCHECK for that.
- Optimize AesPatternCryptor handling on the special pattern 1:0.
Change-Id: Idc704e7bc6b347741336f38c6d3620fc19392960
This is part of the effort to support Opus in iso-bmff #83.
Changes in this CL:
- Add support for multiple SampleGroupDescription and SampleToGroup
boxes in TrackFragment box;
- Add support for SampleGroupDescription and SampleToGroup boxes
in SampleTable box;
- Add support for AudioRollRecoveryEntry in Sample Group and 'roll'
sample grouping type;
- Also fix a bug that default length was not set correctly in
SampleGroupDescription when constant iv is used.
Change-Id: I7e31386ea6cd17a8ee5e1dca4c1a90937d51368f
- Add hls_name and hls_group_id fields to MuxerOptions. This is used to
pass the NAME and GROUP-ID values for EXT-X-MEDIA tag to
MuxerListener.
- Change MuxerListener::OnEncryptionInfoReady() to take an
initialization vector.
- Change MuxerListener::OnNewSegment() to take segment name.
- Reworded and formatted MuxerListener comments to Doxygen style.
Issue #85
Change-Id: Iea06e68552a56ae180177ffd6ca315a7cf39456c
- crypt_byte_block and skip_byte_block for pattern-based encryption.
- constant_iv for constant iv (used by 'cbcs' protection scheme).
- Also renamed iv_size to per_sample_iv_size.
- Also changed "bool is_encrypted" to "uint8_t is_protected" to align
with CENC spec.
Issue #78
Change-Id: I2878a91e0ebe536a08a3e3109daf157fe4440e27
- Remove EncryptionMode enums
- Remove AesEncryptor::InitializeWithRandomIv, replaced with
a static function AesCryptor::GenerateRandomIv, which should
be called to generate the iv if the iv is empty.
This change is to prepare support for CBCS and CENS pattern-based
protection schemes.
Issue #77
Change-Id: Icba35089d6e451cbea7ebbf5dd5674079f206390
- FOURCC is not a mp4 only concept. It is also used elsewhere.
- RCHECK has been used outside formats/mp4.
Also updated the FOURCC enum names to match the actual fourcc code, e.g.
FOURCC_mdat for "mdat".
Change-Id: I5be02f12695882c0fb41d359305fb8ec01303a06
- Part 1.
- Add packager command line argument "protection_scheme" to specify
protection scheme. Plumb through packager code to enable CBC
encryption/decryption.
- Add scheme type "cbc1" to sinf.
- Refactor AES encryptor and decryptor.
- Need more work in the subsample handling.
Issue #77
Change-Id: I3a9304d89adf5efbfb226b6e805a3077b6cb8c68
* EncryptionKey now contains them rather than a PSSH box.
* Outputs PSSH boxes for each entry.
* Outputs a ContentProtection element for each entry.
* Removed SystemName and UUID from KeySource.
* Removed --scheme_id_uri packager argument.
Issue #88
Change-Id: I2651784c3220fd64f5b1773fdcd70285690cf8c0
For non-video slices, the data is not encrypted. This also skips the
frame headers for H.264; support for H.265 will be added later.
Issue #40
Change-Id: Id0cb0fb9ddb6adedf63ef4aef6b3a26260a21654
For mp4 outputs, a metadata box with version information is added to
moov box.
For mpd outputs, a text comment with version information is added in
the beginning of mpd file.
Issue #60
Change-Id: I783ba370781c0a8f77c910ff1172bad2e7edff75
- Parse vp9 bitstream to get vpx codec configuration
- Add subsample encryption for vp9
- Also fixed a bug in VP9 parser if segmentation update_map is enabled
Change-Id: I69dc97088aa38c94c6d37fdbcf3d9cfc942a3df6
- Add Box::WriteHeader and Box::HeaderSize methods. The concrete
box implementations should not need care about whether it is a
Box or FullBox normally.
- Rename Box::ReadWrite to Box::ReadWriteInternal to make it clear
that it is an internal methods. Make it private so it cannot be
incorrectly called in box implementions.
- Make an internal implementation of ComputeSizeInternal to compute
box size. |atom_size| is updated in ComputeSize, which wraps
ComputeSizeInternal.
Change-Id: I3fbcf8c527581b676d9d13f1ac1dd798da7c4d5f
- Neither live with or without key rotation did not output the right
result.
- No key rotation: did not produce any ContentProtection element.
- With key rotation: did not have DRM specific ContentProtection.
- To get key rotation working with shaka player, <cenc:pssh> elements
are removed.
Change-Id: I1f34d303ae1f3ea81820e3368ab66b8420498372
- Because MpdBuilder no longer sets ContentProtection, live was broken.
- For key-rotation, <cenc:pssh> element is updated.
Change-Id: I45bb80a12faff39ccf5deb82439c0732ed9cea59
The segment duration was not reset after segment was finalized. It
was reset after adding one sample. This new sample was added to the
new fragment but was not recorded in the new segment, which resulted
in off-by-one error in the segment generation.
Change-Id: I1f9e00591be6b897773bf6caf94409b4bcd2277f
Joey Parrish
Caitlin O'Callaghan
Joey Parrish
KongQun Yang
Aaron Vaage
Haoming Chen
Kyle Alexander
Thomas Inskip
Rintaro Kuroiwa
Bei Li
Jacob Trimble