- nalu_data points to the beginning of the nalu, instead of
beginning of the slice header which excluded the nalu
header.
- nalu_size is the size of the whole nalu.
- header_bit_size calculation is corrected. The size used to exclude
emulation prevention bytes.
Change-Id: Ic00f42caeddf7b4701f3948e6ef8a3537fd7f770
- If OnEncryptionStart() is called OnMediaStart(), someone should be
calling NotifyEncrytionStart().
Fixes#169
Change-Id: I597f317d2ddeb3091b7e9d238eb9695b4cc9c69d
Three options are supported right now:
- reuse=1|0
Allow or disallow reusing UDP sockets. Default 0.
- interface=a.b.c.d
Address of the interface over which to receive UDP multicast
streams.
- timeout=microseconds
Timeout in microseconds. Default to unlimited.
A UDP url should be of the form udp://ip:port[?options], here
is an example:
udp://224.1.2.30:88?reuse=1&interface=10.11.12.13&timeout=12345
Also deprecate --udp_interface_address flag in favor udp options.
Closes#133
Change-Id: I962d35bfedc1779d67ba20ed910207c66b7c1a15
1. Allow encryption pattern of 0:0, which is treated as 1:0;
2. Remove the special handling of pattern 1:0 in pattern cryptor
which may not always be correct;
3. Allow senc/saio/saiz boxes to be absent.
Change-Id: I372e61182ec577107e39cb601c3aed80616b036d
The original code creates temporary file in the current directory,
which may not always be writable.
Change-Id: Icc278dd5db6be6206ae29defbb7423bae39cc978
- Also import the version of the protobuf bundled in packager first,
this avoids importing the installed version of the protobuf, which
may not be compatible with this script.
- Print help if no argument is supplied.
Fixes#162
Change-Id: I1b5e87ba7fb51e81b0d4dd3791aaeb37ee0fd6ce
Cues used to be generated in the end of the file; if http range
request is not supported, clients have to download the whole
file to get to the cues.
This CL updated TwoPassSingleSegmentSegmenter to write cues
after writing webm header.
This CL also updates libwebm dependency to latest.
Closes#159
Change-Id: Ic73548e1b872e6b13a37627707e7d0ff3e556877
The original code accumulates sample durations in seconds (double)
and then generates new segment / cluster by comparing the accumulated
value with configured value.
There may be loss of precision when accumulating values in double.
For example, with a GOP of 96 frames and frame rate of 24 fps; the
accumulated frame duration for 96 frames is 3.999999999999, which is
very close to 4.0 but not 4.0. Problem would arise if segment
duration is set to 4. The created segments would have a duration of
8 seconds instead of 4 seconds.
The new code accumulates sample durations in uint64_t relative to
input time scale; the configured segment duration will be converted to
timescale for comparison. This avoids loss of precision.
Change-Id: I3ae24be82a7ce45f923a6f90fea495b8b6b2e7ef
Some subtitle files use .webvtt instead of .vtt, probably because
ffmpeg uses -f webvtt when converting from some other format.
Change-Id: If88e8d2b90e5dea6751409568d5191e923dec4aa
- Also regenerated test content to insert an iframe every one
second: ffmpeg -i source.webm -auto-alt-ref 1 -g 30 out.webm
This makes sure the content is actually encrypted with one
second clear lead in end to end test.
Change-Id: I488143c148e2d6c45ba1586f6d0d835dc46db86e
- Add decrypt_config in media sample and stream.
- Update subsamples when converting NAL unit to bytestream.
Change-Id: I7b8975a453f81b22cf74bee3c9a58b7e458cbaae
1. Replace STLDeleter with unique_ptr in container, which is
supported in C++11
2. Replace string_as_array with &string[0] which is guaranteed
to work in C++11
Change-Id: I7f39c0e51fc8a3fcbb41313094a0ca6b33db7bf3
The current behavior of logging to a file in the same directory
as the binary will break if the binary does not have write access
to that directory.
Fixes Issue #139
Change-Id: I11adfaec676fc9bbef2a5caa3261889d1fba3b88
In H264, there may be multiple consecutive video slice NAL units
in the same frame. The original code assigns a new access unit
for every video slice NAL unit, which is incorrect.
Fixes#134.
Change-Id: I4d44271df48cb08867ddd02f7494fb3573af3356
Mimic iso-bmff behavior: either all the samples in a segment are encrypted
or all the samples are clear.
Change-Id: I03bdbbf5a4b690f4d87c4dceb0f8155e6fae941e
The right way to detect the presence of a keyframe in a BlockGroup
is to look for the absence of the ReferenceBlock element [1].
Closes b/30433206
[1] https://matroska.org/technical/specs/index.html#ReferenceBlock
Change-Id: I2b3c8704cbabcd5cbee38448e5528425865561a4
Also updated packager_test not to fill in output_format by default,
which will help catch these kinds of bugs.
Closes#130
Change-Id: I77157317de822d3f543f7e27d94bb4df7a1649d2
This flag is needed to workaround the Chromium bug
https://crbug.com/398130, which uses decoding timestamp
in buffered range.
Closes#113
Change-Id: Ib8f18be7165dd968bdc36c18ce29f694235c0c26
Packager should not care about this flag, whether it is supported
is up to the decoder.
Closes#126
Change-Id: I5e05d291eab01375f7f11c951b9dc93c1358c38a
- Add MuxerListener::OnEncryptionStart() for notifying that further
segments are encrypted.
b/29621230
Change-Id: I881b29d55baaf3d04e005a3b95d898071c3f272b
- Cannot include PMT for following encrypted segments in the clear lead.
Some players consider them as conflicting codecs.
- Add EXT-X-DISCONTINUITY in front of first EXT-X-KEY to notify that the
codec is switching from e.g. "avc1" to "zavc".
b/29621230
Change-Id: I45c74813630c229d66245e992eb3a5117326bb14
Before, we converted the WebM configuration to MP4 in the video
client, however this lead to a bug when fields were missing. So
now don't convert until the cluster parser so the extra info from
the stream can be added.
This also fixes a bug where the value was not printed in the warning
logs.
b/29580732
Change-Id: If0a1a4d135f98292cdaae15a11027f42d844e85d
Since the |extra_data| field contains codec-specific configuration
data, it makes sense to call it |codec_config|.
Change-Id: If9e35165a00fe82628cf931df397a8ef06505b0d
Although superframe index is not encrypted, it should still be inserted
into subsamples list (with cipher_bytes as 0).
Change-Id: I06b38f8333a22a31a71cd67e0412218dd3aaa5c3
- Add flags and stream descriptor fields for HLS.
- Remove fields from MuxerOptions. Instead pass them directly to
HlsNotifyMuxerListener.
- Rebase segment names to the master playlist's path where it makes
sense.
Change-Id: If4f54bc56ff46dc6140859a79ed66f7b99112ed7
- Tracks other than video are protected using whole-block full-sample
encryption as specified in ISO/IEC 23001-7:2016(E) 9.7, which is
equivalent to a pattern of 1:0. This is different to the non pattern
encryption counterparts.
- Also updated the code to allow the existence of other protection
schemes in the original content, which will simply be ignored.
- The internal cryptor used by AesPatternCryptor should not use
constant iv, add a DCHECK for that.
- Optimize AesPatternCryptor handling on the special pattern 1:0.
Change-Id: Idc704e7bc6b347741336f38c6d3620fc19392960
This is part of the effort to support Opus in iso-bmff #83.
Changes in this CL:
- Add support for multiple SampleGroupDescription and SampleToGroup
boxes in TrackFragment box;
- Add support for SampleGroupDescription and SampleToGroup boxes
in SampleTable box;
- Add support for AudioRollRecoveryEntry in Sample Group and 'roll'
sample grouping type;
- Also fix a bug that default length was not set correctly in
SampleGroupDescription when constant iv is used.
Change-Id: I7e31386ea6cd17a8ee5e1dca4c1a90937d51368f
- For encrypted segments, PMT specified by SAMPLE-AES specification is
generated.
- Remove time_scale_ field from TsWriter. It is not used.
- Move ContinuityCounter to a separate file.
- Add ProgramMapTableWriter and implementations.
- continuity_counter is incremented for PAT and PMT.
Change-Id: If0dd0990203cb6990f39a6832048bdc3ff08decd
This add several unit tests for EsParserH26x to test the various
NAL unit orders and access unit contents. Some tests are disabled
and will be fixed in another patch.
Change-Id: Id5e3291e22f1fe17ada2c03c42e2cdfe226abcb2
- BytesOfProtectedData in 'cens' SHALL also be 16-byte aligned
- Fix an incorrect box definition bug w.r.t to 'cbcs' and 'cens'
- Also add various protection scheme tests
Close#77Close#78
Change-Id: I63c8d8b01ce16ed60affa97ec95fc62bc2da06df
- These warning messages are not useful since the code needs to
loop through various container types to find a matching one.
Change-Id: I1d8eca563faf24e485ac71cce32e09515c174bf2
Replaces the InitializeFromH264 and InitializeFromH265 methods with
a single Initialize method that accepts a CodecType. Also moves the
CodecType enum from NaluReader to Nalu.
Change-Id: Ie33aa9c0d772a7f3c6a2e9c867e25be3edfe7828
- CBC cryptors should accept IV of size 8 bytes - it will be zero
extended to 16 bytes.
- Fixed iv() not updated problem in AesPatternCryptor.
- Replace kChainAcrossCalls with ConstantIvFlag enum flags.
Change-Id: I3fb4de0e8abbe891e6271e779373ba53f8df660d
- Sample duration wasn't scaled in TsSegmenter to calculate the current
segment's length. So segmenting length did not always respect
segment_duration.
Change-Id: I1ef4747dbd12bde7852ffcbceb971f2775aa18b3
Parsing vui_parameters in the SPS is required to be able to extract
the resolution of the video. This also adds a method to extract
the resolution to the H.265 parser.
Issue #46
Change-Id: Idf498d2afdb36a689490151a4ae6baef0b6b73f6
Now Finalize() will close all the files used by the segmenters. This
is important to allow WebMMuxer::FireOnMediaEndEvent to get the
correct size of the media file.
This also changes the WebM muxer to use 64-bit numbers for the init
and index ranges to correctly support >4GB files.
b/28194272
Change-Id: Ia84e4a4b0756f89644efea99a1a51968b22a1338
- Add hls_name and hls_group_id fields to MuxerOptions. This is used to
pass the NAME and GROUP-ID values for EXT-X-MEDIA tag to
MuxerListener.
- Change MuxerListener::OnEncryptionInfoReady() to take an
initialization vector.
- Change MuxerListener::OnNewSegment() to take segment name.
- Reworded and formatted MuxerListener comments to Doxygen style.
Issue #85
Change-Id: Iea06e68552a56ae180177ffd6ca315a7cf39456c
- crypt_byte_block and skip_byte_block for pattern-based encryption.
- constant_iv for constant iv (used by 'cbcs' protection scheme).
- Also renamed iv_size to per_sample_iv_size.
- Also changed "bool is_encrypted" to "uint8_t is_protected" to align
with CENC spec.
Issue #78
Change-Id: I2878a91e0ebe536a08a3e3109daf157fe4440e27
- Remove EncryptionMode enums
- Remove AesEncryptor::InitializeWithRandomIv, replaced with
a static function AesCryptor::GenerateRandomIv, which should
be called to generate the iv if the iv is empty.
This change is to prepare support for CBCS and CENS pattern-based
protection schemes.
Issue #77
Change-Id: Icba35089d6e451cbea7ebbf5dd5674079f206390
- FOURCC is not a mp4 only concept. It is also used elsewhere.
- RCHECK has been used outside formats/mp4.
Also updated the FOURCC enum names to match the actual fourcc code, e.g.
FOURCC_mdat for "mdat".
Change-Id: I5be02f12695882c0fb41d359305fb8ec01303a06
- Create AesCryptor class as the common base
- AesCryptor::Crypt function will serve as an Encrypt function for
encryptor and a Decrypt function for Decryptor.
Change-Id: Ie91fb14964b5091786705bf510656f40d73af160
- Simple implementation of MPEG2 TS muxer.
- This does not take MuxerListener so a manifest cannot be generated.
- Encryption is not supported.
Issue #84
Change-Id: I117b772dbbce5437398defbd564883ad758916d5
- Segmenter should not finish a segment unless the next sample is a key
frame.
- Renamed PesPacketGenerator::Finalize() to Flush().
- Use duration from the sample instead of the one copied to PesPacket.
- Remove duration field from PesPacket.
Issue #84
Change-Id: Icd90e65fd63fdeb955e7abac3473b0b54db6ac4a
- Multi-file segmenter implementation.
- The samples are passed to PesPacketGenerator to generate PesPackets.
PesPackets are passed to TsWriter to write them to file.
Issue #84
Change-Id: Ia4cae2abe2e7df46016dcdb791baaab2818aea03
Rintaro Kuroiwa
Kyle Alexander
Kongqun Yang
sammirata
Joey Parrish
Haoming Chen
Thomas Inskip
Gabe Kopley
Jacob Trimble