Also added a few more command line flags for end to end test:
- no-remove_temp_files_after_test: do not remove test artifacts after
test
- encryption_key, encryption_iv: allow injecting encryption key/iv from
command line
Change-Id: I62084790e10fe6a385b90cb96d9515d8436b2a49
- The flags were overwritten in a loop and therefore only stored the
last value of the flag.
- Change the fields into arrays so that the flags are not overwritten.
Change-Id: I59762d7c84bc3d81bf3b0b5e85ffe689260d970a
Added a flag --strip_parameter_set_nalus. When enabled, parameter
set NAL units, SPS/PPS for H264 and SPS/PPS/VPS for H265, are stripped
from frames when converting NAL byte stream (AnnexB stream) to NAL
unit stream, which generates avc1/hvc1; otherwise they are not
stripped, and avc3/hev1 is generated.
Parameter set NAL units should not be stripped if they are varying
in the frames otherwise the frames may fail to be decoded.
The flag is enabled by default as we don't usually see varying
SPS/PPS/VPS and it is more space efficient with them stripped.
Set --strip_parameter_set_nalus=false to disable the flag if there
are varying SPS/PPS/VPS in the frames. This addresses #206.
Change-Id: I34bde6f33069f9f77d51a510b39f58a0f0e141aa
The issue could lead to the MPD attribute mediaPresentationDuration being
wrongly generated for WebM streams with a duration longer than INT32_MAX.
The root-cause was that StreamInfo::set_duration() accepted an int instead of a
uint64_t. This seems like a pure typo, since StreamInfo already uses a uint64_t
internally for representing duration.
This CL also removes EncryptionConfig stream data type and merges it
into StreamInfo/SegmentInfo instead.
Change-Id: Idb70ce503e61d3c951225cc78b6b15c084e16dcd
- Disable subsample encryption for VP8 in ISO-BMFF
- Apply block alignment to all subsamples for VP9 in ISO-BMFF,
instead of just superframes.
Change-Id: I8dd31cc16e87abc4d538330eaff9acb0509497df
- luma_weight_l0_flag, luma_weight_l1_flag,
chroma_weight_l0_flag, chroma_weight_l1_flag were there but not set.
- The user should use the values in pred_weight_table_l0 and
pred_weight_table_l1 instead which are set.
Change-Id: Ic9c44fb113717346938a339faf074daa32d4c2d2
Also moved MediaHandler output validation to Initialize instead.
This CL also addresses #122 with consistent chunking.
Change-Id: I60c0da6d1b33421d7828bcb827d18899e71884ce
- WebVttMediaParser uses WebVttSampleConverter to generate non
overlapping media samples.
- The media samples contains ISO BMFF boxes.
- Add kCodecWebVtt to signal that the media is webvtt and
the samples will be in ISO BMFF boxes.
Change-Id: I639902cdba7b04af75428bc20622e26b8203cfb2
Before this, HLS output did not contain language information.
Now, media playlists are properly tagged with a language in the
master playlist.
b/36134267
Change-Id: I172e946dbedd096a44cb2f917b007cc004756228
- Also sets up the packaging and verify it works.
Some of the changes are temporary to get the integration going.
Change-Id: I0cf6c379d185e157808acabb9ef58ff93d4a39ae
The spec actually requires all NAL units to be escaped, so there
is no need to escape it again.
NAL byte stream is one demarcation method; NAL unit stream is another
demarcation method. Regardless of the demarcation method used, the
requirement for NAL unit is the same. See the last paragraph of
7.4.1 NAL unit semantics on the requirement on emulation prevention bytes.
Change-Id: Icc63fcc5cf965632e331f5af5f673164c7c1663a
CENCv3 recommends only encrypting video data in slice NALs. Slice
data partition NALs should not be encrypted.
In the code, differentiate is_vcl and is_video_slice. They are the
same for H265; for H264, vcl NALs include slice data partition NALs
but video_slice NALs do not.
Change-Id: I91f4bdd76d25f0eac50e39aed350ebce3f667121
- Logic for splitting up WebVTT cues into MP4 samples.
- For any cue intervals that overlap, a new sample must be created.
Change-Id: Icf7478f42d8c5790bf6f404d512c1251dd34c405
This handler is a multi-in multi-out handler. If more than one input is
provided, there should be one and only one video stream; also, all inputs
should come from the same thread and are synchronized.
There can be multiple chunking handler running in different threads or even
different processes, we use the "consistent chunking algorithm" to make sure
the chunks in different streams are aligned without explicit communcating
with each other - which is not efficient and often difficult.
Consistent Chunking Algorithm:
1. Find the consistent chunkable boundary
Let the timestamps for video frames be (t1, t2, t3, ...). Then a
consistent chunkable boundary is simply the first chunkable boundary after
(tk / N) != (tk-1 / N), where '/' denotes integer division, and N is the
intended chunk duration.
2. Chunk only at the consistent chunkable boundary
This algorithm will make sure the chunks from different video streams are
aligned if they have aligned GoPs. However, this algorithm will only work
for video streams. To be able to chunk non video streams at similar
positions as video streams, ChunkingHandler is designed to accept one video
input and multiple non video inputs, the non video inputs are chunked when
the video input is chunked. If the inputs are synchronized - which is true
if the inputs come from the same demuxer, the video and non video chunks
are aligned.
Change-Id: Id3bad51ab14f311efdb8713b6cd36d36cf9e4639
- Deprecated command line flags --profile and --single_segment.
'segment_template' in stream descriptors implies live profile
and non-single segment.
- Added flag --generate_static_mpd_for_live_profile to generate
static mpd for live profile; if not set, dynamic mpd will be
generated.
Close#142
Change-Id: I78879297ed118f0f246c4753a16ad125bd6b5e4f
- Added two new fields in MpdOptions: dash_profile and mpd_type
- Updated MpdBuilder to support LiveProfile with static mpd
- Command line arguments will be updated in the next CL
Issue #142
Change-Id: Ibd35e5c9e1b1ef98043392e3f04a0af4700135c1
- Add MSVS related patterns to gitignore.
- Removed encryption_modes.h from media_base.gyp. It doesn't exist.
Change-Id: I44bc86ff7e79daf6f7bc61c21a558937530d8e66
- nalu_data points to the beginning of the nalu, instead of
beginning of the slice header which excluded the nalu
header.
- nalu_size is the size of the whole nalu.
- header_bit_size calculation is corrected. The size used to exclude
emulation prevention bytes.
Change-Id: Ic00f42caeddf7b4701f3948e6ef8a3537fd7f770
- If OnEncryptionStart() is called OnMediaStart(), someone should be
calling NotifyEncrytionStart().
Fixes#169
Change-Id: I597f317d2ddeb3091b7e9d238eb9695b4cc9c69d
Three options are supported right now:
- reuse=1|0
Allow or disallow reusing UDP sockets. Default 0.
- interface=a.b.c.d
Address of the interface over which to receive UDP multicast
streams.
- timeout=microseconds
Timeout in microseconds. Default to unlimited.
A UDP url should be of the form udp://ip:port[?options], here
is an example:
udp://224.1.2.30:88?reuse=1&interface=10.11.12.13&timeout=12345
Also deprecate --udp_interface_address flag in favor udp options.
Closes#133
Change-Id: I962d35bfedc1779d67ba20ed910207c66b7c1a15
1. Allow encryption pattern of 0:0, which is treated as 1:0;
2. Remove the special handling of pattern 1:0 in pattern cryptor
which may not always be correct;
3. Allow senc/saio/saiz boxes to be absent.
Change-Id: I372e61182ec577107e39cb601c3aed80616b036d
The original code creates temporary file in the current directory,
which may not always be writable.
Change-Id: Icc278dd5db6be6206ae29defbb7423bae39cc978
- Also import the version of the protobuf bundled in packager first,
this avoids importing the installed version of the protobuf, which
may not be compatible with this script.
- Print help if no argument is supplied.
Fixes#162
Change-Id: I1b5e87ba7fb51e81b0d4dd3791aaeb37ee0fd6ce
Cues used to be generated in the end of the file; if http range
request is not supported, clients have to download the whole
file to get to the cues.
This CL updated TwoPassSingleSegmentSegmenter to write cues
after writing webm header.
This CL also updates libwebm dependency to latest.
Closes#159
Change-Id: Ic73548e1b872e6b13a37627707e7d0ff3e556877
The original code accumulates sample durations in seconds (double)
and then generates new segment / cluster by comparing the accumulated
value with configured value.
There may be loss of precision when accumulating values in double.
For example, with a GOP of 96 frames and frame rate of 24 fps; the
accumulated frame duration for 96 frames is 3.999999999999, which is
very close to 4.0 but not 4.0. Problem would arise if segment
duration is set to 4. The created segments would have a duration of
8 seconds instead of 4 seconds.
The new code accumulates sample durations in uint64_t relative to
input time scale; the configured segment duration will be converted to
timescale for comparison. This avoids loss of precision.
Change-Id: I3ae24be82a7ce45f923a6f90fea495b8b6b2e7ef
Some subtitle files use .webvtt instead of .vtt, probably because
ffmpeg uses -f webvtt when converting from some other format.
Change-Id: If88e8d2b90e5dea6751409568d5191e923dec4aa
- Also regenerated test content to insert an iframe every one
second: ffmpeg -i source.webm -auto-alt-ref 1 -g 30 out.webm
This makes sure the content is actually encrypted with one
second clear lead in end to end test.
Change-Id: I488143c148e2d6c45ba1586f6d0d835dc46db86e
- Add decrypt_config in media sample and stream.
- Update subsamples when converting NAL unit to bytestream.
Change-Id: I7b8975a453f81b22cf74bee3c9a58b7e458cbaae
1. Replace STLDeleter with unique_ptr in container, which is
supported in C++11
2. Replace string_as_array with &string[0] which is guaranteed
to work in C++11
Change-Id: I7f39c0e51fc8a3fcbb41313094a0ca6b33db7bf3
The current behavior of logging to a file in the same directory
as the binary will break if the binary does not have write access
to that directory.
Fixes Issue #139
Change-Id: I11adfaec676fc9bbef2a5caa3261889d1fba3b88
In H264, there may be multiple consecutive video slice NAL units
in the same frame. The original code assigns a new access unit
for every video slice NAL unit, which is incorrect.
Fixes#134.
Change-Id: I4d44271df48cb08867ddd02f7494fb3573af3356
Mimic iso-bmff behavior: either all the samples in a segment are encrypted
or all the samples are clear.
Change-Id: I03bdbbf5a4b690f4d87c4dceb0f8155e6fae941e
The right way to detect the presence of a keyframe in a BlockGroup
is to look for the absence of the ReferenceBlock element [1].
Closes b/30433206
[1] https://matroska.org/technical/specs/index.html#ReferenceBlock
Change-Id: I2b3c8704cbabcd5cbee38448e5528425865561a4
Also updated packager_test not to fill in output_format by default,
which will help catch these kinds of bugs.
Closes#130
Change-Id: I77157317de822d3f543f7e27d94bb4df7a1649d2
This flag is needed to workaround the Chromium bug
https://crbug.com/398130, which uses decoding timestamp
in buffered range.
Closes#113
Change-Id: Ib8f18be7165dd968bdc36c18ce29f694235c0c26
Packager should not care about this flag, whether it is supported
is up to the decoder.
Closes#126
Change-Id: I5e05d291eab01375f7f11c951b9dc93c1358c38a
- Add MuxerListener::OnEncryptionStart() for notifying that further
segments are encrypted.
b/29621230
Change-Id: I881b29d55baaf3d04e005a3b95d898071c3f272b
- Cannot include PMT for following encrypted segments in the clear lead.
Some players consider them as conflicting codecs.
- Add EXT-X-DISCONTINUITY in front of first EXT-X-KEY to notify that the
codec is switching from e.g. "avc1" to "zavc".
b/29621230
Change-Id: I45c74813630c229d66245e992eb3a5117326bb14
Before, we converted the WebM configuration to MP4 in the video
client, however this lead to a bug when fields were missing. So
now don't convert until the cluster parser so the extra info from
the stream can be added.
This also fixes a bug where the value was not printed in the warning
logs.
b/29580732
Change-Id: If0a1a4d135f98292cdaae15a11027f42d844e85d
Since the |extra_data| field contains codec-specific configuration
data, it makes sense to call it |codec_config|.
Change-Id: If9e35165a00fe82628cf931df397a8ef06505b0d
Although superframe index is not encrypted, it should still be inserted
into subsamples list (with cipher_bytes as 0).
Change-Id: I06b38f8333a22a31a71cd67e0412218dd3aaa5c3
- Add flags and stream descriptor fields for HLS.
- Remove fields from MuxerOptions. Instead pass them directly to
HlsNotifyMuxerListener.
- Rebase segment names to the master playlist's path where it makes
sense.
Change-Id: If4f54bc56ff46dc6140859a79ed66f7b99112ed7
- Tracks other than video are protected using whole-block full-sample
encryption as specified in ISO/IEC 23001-7:2016(E) 9.7, which is
equivalent to a pattern of 1:0. This is different to the non pattern
encryption counterparts.
- Also updated the code to allow the existence of other protection
schemes in the original content, which will simply be ignored.
- The internal cryptor used by AesPatternCryptor should not use
constant iv, add a DCHECK for that.
- Optimize AesPatternCryptor handling on the special pattern 1:0.
Change-Id: Idc704e7bc6b347741336f38c6d3620fc19392960
This is part of the effort to support Opus in iso-bmff #83.
Changes in this CL:
- Add support for multiple SampleGroupDescription and SampleToGroup
boxes in TrackFragment box;
- Add support for SampleGroupDescription and SampleToGroup boxes
in SampleTable box;
- Add support for AudioRollRecoveryEntry in Sample Group and 'roll'
sample grouping type;
- Also fix a bug that default length was not set correctly in
SampleGroupDescription when constant iv is used.
Change-Id: I7e31386ea6cd17a8ee5e1dca4c1a90937d51368f
- For encrypted segments, PMT specified by SAMPLE-AES specification is
generated.
- Remove time_scale_ field from TsWriter. It is not used.
- Move ContinuityCounter to a separate file.
- Add ProgramMapTableWriter and implementations.
- continuity_counter is incremented for PAT and PMT.
Change-Id: If0dd0990203cb6990f39a6832048bdc3ff08decd
This add several unit tests for EsParserH26x to test the various
NAL unit orders and access unit contents. Some tests are disabled
and will be fixed in another patch.
Change-Id: Id5e3291e22f1fe17ada2c03c42e2cdfe226abcb2
- BytesOfProtectedData in 'cens' SHALL also be 16-byte aligned
- Fix an incorrect box definition bug w.r.t to 'cbcs' and 'cens'
- Also add various protection scheme tests
Close#77Close#78
Change-Id: I63c8d8b01ce16ed60affa97ec95fc62bc2da06df
- These warning messages are not useful since the code needs to
loop through various container types to find a matching one.
Change-Id: I1d8eca563faf24e485ac71cce32e09515c174bf2
Replaces the InitializeFromH264 and InitializeFromH265 methods with
a single Initialize method that accepts a CodecType. Also moves the
CodecType enum from NaluReader to Nalu.
Change-Id: Ie33aa9c0d772a7f3c6a2e9c867e25be3edfe7828
- CBC cryptors should accept IV of size 8 bytes - it will be zero
extended to 16 bytes.
- Fixed iv() not updated problem in AesPatternCryptor.
- Replace kChainAcrossCalls with ConstantIvFlag enum flags.
Change-Id: I3fb4de0e8abbe891e6271e779373ba53f8df660d
- Sample duration wasn't scaled in TsSegmenter to calculate the current
segment's length. So segmenting length did not always respect
segment_duration.
Change-Id: I1ef4747dbd12bde7852ffcbceb971f2775aa18b3
Parsing vui_parameters in the SPS is required to be able to extract
the resolution of the video. This also adds a method to extract
the resolution to the H.265 parser.
Issue #46
Change-Id: Idf498d2afdb36a689490151a4ae6baef0b6b73f6
Now Finalize() will close all the files used by the segmenters. This
is important to allow WebMMuxer::FireOnMediaEndEvent to get the
correct size of the media file.
This also changes the WebM muxer to use 64-bit numbers for the init
and index ranges to correctly support >4GB files.
b/28194272
Change-Id: Ia84e4a4b0756f89644efea99a1a51968b22a1338
- Add hls_name and hls_group_id fields to MuxerOptions. This is used to
pass the NAME and GROUP-ID values for EXT-X-MEDIA tag to
MuxerListener.
- Change MuxerListener::OnEncryptionInfoReady() to take an
initialization vector.
- Change MuxerListener::OnNewSegment() to take segment name.
- Reworded and formatted MuxerListener comments to Doxygen style.
Issue #85
Change-Id: Iea06e68552a56ae180177ffd6ca315a7cf39456c
- crypt_byte_block and skip_byte_block for pattern-based encryption.
- constant_iv for constant iv (used by 'cbcs' protection scheme).
- Also renamed iv_size to per_sample_iv_size.
- Also changed "bool is_encrypted" to "uint8_t is_protected" to align
with CENC spec.
Issue #78
Change-Id: I2878a91e0ebe536a08a3e3109daf157fe4440e27
- Remove EncryptionMode enums
- Remove AesEncryptor::InitializeWithRandomIv, replaced with
a static function AesCryptor::GenerateRandomIv, which should
be called to generate the iv if the iv is empty.
This change is to prepare support for CBCS and CENS pattern-based
protection schemes.
Issue #77
Change-Id: Icba35089d6e451cbea7ebbf5dd5674079f206390
- FOURCC is not a mp4 only concept. It is also used elsewhere.
- RCHECK has been used outside formats/mp4.
Also updated the FOURCC enum names to match the actual fourcc code, e.g.
FOURCC_mdat for "mdat".
Change-Id: I5be02f12695882c0fb41d359305fb8ec01303a06
- Create AesCryptor class as the common base
- AesCryptor::Crypt function will serve as an Encrypt function for
encryptor and a Decrypt function for Decryptor.
Change-Id: Ie91fb14964b5091786705bf510656f40d73af160
- Simple implementation of MPEG2 TS muxer.
- This does not take MuxerListener so a manifest cannot be generated.
- Encryption is not supported.
Issue #84
Change-Id: I117b772dbbce5437398defbd564883ad758916d5
- Segmenter should not finish a segment unless the next sample is a key
frame.
- Renamed PesPacketGenerator::Finalize() to Flush().
- Use duration from the sample instead of the one copied to PesPacket.
- Remove duration field from PesPacket.
Issue #84
Change-Id: Icd90e65fd63fdeb955e7abac3473b0b54db6ac4a
- Multi-file segmenter implementation.
- The samples are passed to PesPacketGenerator to generate PesPackets.
PesPackets are passed to TsWriter to write them to file.
Issue #84
Change-Id: Ia4cae2abe2e7df46016dcdb791baaab2818aea03
The positions in the SeekHead element should be relative to the
Segment payload, not the start of the file. Also added entries for
Tracks and SegmentInfo.
Change-Id: Id692da25fffc27d78e9f1a06d061431aeb6f1e7c
- Optimize and clean up encryption and decryption code.
- Consolidate various CBC encryption/decryption schemes into a
common class.
- Make it a constructor argument whether cipher block chain is
continuous across Encrypt/Decrypt calls.
- Also align protected region size as required in CENC spec.
Issue #77
Change-Id: I533d92ada3cd80933b532b9c3a1cca105ba66f8e
Another feature that the mac build does not support. It incorrectly
uses a copy-constructor when creating new values in a std::map. This
is incorrect and should use an in-place constructor with C++11.
Change-Id: I1e822747e97eb4ae01596d63ea05058cc383cb49
This adds a preliminary H.265 parser. The parser only support
reading the slice header. This also attaches the H.265 parser to the
VideoSliceHeaderReader so H.265 frames can have unencrypted headers.
Issue #46Closes#40
Change-Id: I8b98e1f8bb04e359d9bf896fd5b2939c326b196b
The flag --include_common_pssh will add another PSSH box in addition
to the Widevine one which will contain the key IDs of all the keys.
Closes#88
Change-Id: Ic719b19747530f0e4856cfb36471a644d572a734
The new algorithm will parse NAL unit header and only starts a new
NAL unit if it is valid, otherwise it will be considered part of
the previous NAL unit.
Closes#96
Change-Id: I45f2a0f37d51841ee8345d6d0d38fcda57e0a009
KeySource is now an abstract class that is implemented in two
types WidevineKeySource and FixedKeySource. This also updates
fixed key encryption to use v1 PSSH boxes with the common system
ID.
This also updates the --pssh argument. Now it accepts full PSSH
boxes rather than data. Multiple PSSH boxes can be concatenated
together.
Issue #88
Change-Id: I4bd0290f6d8b965f7d118f075c96e0f267d7e831
- Part 1.
- Add packager command line argument "protection_scheme" to specify
protection scheme. Plumb through packager code to enable CBC
encryption/decryption.
- Add scheme type "cbc1" to sinf.
- Refactor AES encryptor and decryptor.
- Need more work in the subsample handling.
Issue #77
Change-Id: I3a9304d89adf5efbfb226b6e805a3077b6cb8c68
* EncryptionKey now contains them rather than a PSSH box.
* Outputs PSSH boxes for each entry.
* Outputs a ContentProtection element for each entry.
* Removed SystemName and UUID from KeySource.
* Removed --scheme_id_uri packager argument.
Issue #88
Change-Id: I2651784c3220fd64f5b1773fdcd70285690cf8c0
When normalizing language tags to their shortest form, we need to
split off subtags and treat them as separate components that do not
get changed.
Furthermore, MP4 can only store language tags without subtags. So
only store the main language in MP4 output.
Fixes b/27533973
Change-Id: I96049e274aae9841e321c53039ef6464a2e61574
Add another overload to fetch by key ID directly, used by WebM.
Changed the one using PSSH data in favor of the entire PSSH box.
This also moves the Widevine proto to media base. Now, the
Widevine key source handles creating the Widevine specific PSSH
data.
Change-Id: I6f4633facad39207809ffbad970635d1f9d70983
This moves pssh parsing to its own class in media base. This type
can be used to parse and generate pssh boxes. This new type also
supports both v0 an v1 boxes.
This also modifies the pssh box definition to only have the |raw_box|
and moves all pssh parsing and handling into mp4 media parser.
A follow-up change will replace the remaining usages of 'raw' pssh
box data with the new type.
Issue #88
Change-Id: Ic2436ecb5df8b3558b81e600dc095b0efd122ab1
This moves common parsing code out of the H.264 parser. This is in
preparation for the H.265 parser to use.
Change-Id: Id05b55f6adc2ea31e97c8a9f22023e851808a8a7
Now the AVCDecoderConfiguration and HEVCDecoderConfiguration classes
will read the Nalu from the blocks, meaning they will store a
vector of Nalu objects for the data.
Also added H.265 to the Nalu class and added argument to NaluReader
to read H.264 vs H.265 Nalus.
Change-Id: I8d8194a90fd72a30af66e9776e01379f8428542c
This is needed to test encryption in end to end test since the video
is segmented in gop boundary by default. Due to the existence of clear
lead, the first segment is always left in clear.
Change-Id: Ie8d37a1740f9061515298cb9fb7b58983592cc5b
This member refers to the size of the payload (the data after the
header). Since the pointer is called |data|, calling this size
|data_size| is confusing.
Change-Id: I9174cf6c5c402beddaebbce7c16514470ba0c3da
Now the Nalu data pointer points to the start of the NALU header
rather than pointing to the start code. Added a new method on
NaluReader to check whether the stream starts with a start code.
Change-Id: Ifaecbe0c911aa5cffdf0a966028e6cada8621cc3
For non-video slices, the data is not encrypted. This also skips the
frame headers for H.264; support for H.265 will be added later.
Issue #40
Change-Id: Id0cb0fb9ddb6adedf63ef4aef6b3a26260a21654
Removed the code for NALU splitting in the H.264 parser and moved
it to its own class. Also added support for length-prefixed
NALU splitting for use with the encrypting fragmenter.
Change-Id: I1e91266681f1b117fb2382cf80590651efc06619
Parse channel layout value from dec3 box. Pass it through audio stream
info. MPD builder forms audio channel configuration to signal ec-3
codec.
Specs: 1) ETSI TS 102 366 V1.3.1 Digital Audio Compression (AC-3,
Enhanced AC-3) Standard E.1.3.1.8.
2) DASH-IF Interoperability Points v3.0 9.2.1.2.
Issue #64
Change-Id: Ia2c22dd3d82e757ba5a88ba1de35c5d593f5005e
Before this change, the media file will fail to be parsed if it contains
non-wvtt text streams. This change allows demuxing of video and audio
streams in these media files even though the text stream is ignored.
Fixes#74.
Change-Id: I7ef108a51125c4965fe48c39efe9638f3a0e4759
This also changes the way frames are written in the WebM muxer. Now,
frames are stored and written on the next call to AddSample. So each
call to AddSample will write the previous frame. This is needed to
determine whether the given frame is the last one in the cluster.
Closes#70
Change-Id: Ic69ebad3c4729cdaa2017c9c7f497048501ac907
When generating ninja files we end up with two libwebm targets.
packager/media/formats/webm/webm.gyp:webm -> becomes target libwebm
packager/third_party/libwebm/libwebm.gyp:libwebm -> becomes target libwebm
Solve this conflict by renaming libwebm.gyp:libwebm to mkvmuxer.
There is a target name conflict between packager/base/base.gyp:run_all_unittests and
media_test.gyp:run_all_unittests. Change to media_test.gyp:run_tests_with_atexit_manager to
resolve the conflict.
On Linux the generated ninja files use path/libbase.a as target name.
In the Mac ninja file the target is just libbase.a.
As we have two libbase.a (base/base.gyp and media/base/media_base.gyp) the linking stage fails to include both libs.
Solve by renaming media_base.gyp's base target to media_base
For WebM contents, it is possible that we may receive some NewSampleEvent
before receiving ParserInitEvent. This is because init event is fired
after analyzing a video block which could come after an audio block.
Also modified Flush() function to return a bool to indicate whether the
the flush is successful and whether the samples are handled correctly.
And added macro to ensure Flush() and Parse() results are handled.
Fixes#71
Change-Id: I2294d6f529f54e4578344916559bb1bc116c745a
- Also refactor decryptor management code out of mp4_media_parser.cc
- Move decryptor managment logic to DecryptorSource class to make it
available for webm as well
- Remove data_offset member from DecryptConfig which is not useful
- Add widevine_pssh_data.proto file
Closes#72
Change-Id: I1d32baf4013ebd3382b5372c7433fae5033a260e
- dts was not set earlier, although for WebM, we could assume that
dts is the same as pts.
- Calculate block duration with the difference with the next block
if duration is not encoded, even if track default_duration is set.
- Use track default_duration as a duration estimate for the last
block.
- This also removes opus duration computation from encoded data.
Issues #67, #68
Change-Id: Icaa2769dcb2a89269ae014f44ad6a9262770aed2
- Box definitions for box type DEC3.
- Parser/muxer changes to support Enhanced-AC3 audio codecs.
- MPD signaling will come in Part 3.
Issue #64
Change-Id: Ifcd5efa1f61b470ec225127925631e4329853259
This does not support key-rotation and will give an error. This is
because WebM does not have a way to indicate a change in key ID using
media segments.
b/22463551
Change-Id: I9b3dac818dc370302a5afc0d25d8a060b64d30cd
Added packager tests for WebM audio. Also now only outputs the
language if it's not empty. Fixed the packager tests for that.
b/26540606
Change-Id: Ica804bd710055bcaa2113f948d723dedd78ef909
- Box definitions for box type DAC3.
- Parser/muxer changes to support AC3 audio codecs.
- EC3 audio sample entry will come in Part 2.
- MPD signaling will come in Part 3.
Issue #64
Change-Id: I790b46ae8179b933bb8f7da9cdd38591fe8da43d
ThreadedIoFile spawns a new thread for every new file. Thread
information is stored for tracking purpose by base::tracked_objects.
The tracking object remains even if the thread itself is destroyed.
This results in memory usage increased by a couple of bytes for every
new segment created in live mode (new segments spawns new threads).
Use WorkerPool instead to avoid spawning new threads.
Fixes Issue #61.
Change-Id: Id93283903c3ba8ebf172a0d58e19b082a72c6cf0
For mp4 outputs, a metadata box with version information is added to
moov box.
For mpd outputs, a text comment with version information is added in
the beginning of mpd file.
Issue #60
Change-Id: I783ba370781c0a8f77c910ff1172bad2e7edff75
- Another minor change in segmenter_test_base: scoped_refptr can
be passed by value, remove ".Pass".
Change-Id: I31f0cf74c5ad0aba8890d3b1845155d63d7326a0
* Changed Segmenters to accept StreamInfo rather than MediaStream
to help in testing.
* Changed MemoryFile behavior to mirror local file:
* Read non-existent file is an error.
* Write deletes any existing file.
* Fixed a bug in SingleSegmentSegmenter.
Change-Id: I339e35597ca4661b7a26c6fdbbfa2f9f511c7da0
Javascript/JSON does not support int64_t or unsigned numbers. asset_id,
if greater than 0x80000000 will be converted to negative number. Use
double to represent asset_id instead as 32-bit integer can be lossless
represented using double.
Bug: 26309000
Change-Id: I3e800c396a1231375776295154fb0d96156e980b
This can be used for unit tests to reduce the need for temporary
files. A MemoryFile acts the same as any other File object, but
stores the contents in memory. The memory pointer can be accessed
directly. A file with the 'memory://' prefix will be a memory file.
Change-Id: I10ae3ed5391c8fd838e6dfb33106dec959bdc224
- Parse vp9 bitstream to get vpx codec configuration
- Add subsample encryption for vp9
- Also fixed a bug in VP9 parser if segmentation update_map is enabled
Change-Id: I69dc97088aa38c94c6d37fdbcf3d9cfc942a3df6
- Add Box::WriteHeader and Box::HeaderSize methods. The concrete
box implementations should not need care about whether it is a
Box or FullBox normally.
- Rename Box::ReadWrite to Box::ReadWriteInternal to make it clear
that it is an internal methods. Make it private so it cannot be
incorrectly called in box implementions.
- Make an internal implementation of ComputeSizeInternal to compute
box size. |atom_size| is updated in ComputeSize, which wraps
ComputeSizeInternal.
Change-Id: I3fbcf8c527581b676d9d13f1ac1dd798da7c4d5f
Added two stream descriptors that are both used to tell the output
format. If it is not given, the packager will use the output file
extension to determine the output format.
Change-Id: Ib8d5dcf52956c2d451e77ea6a90d9502d4a77064
* Added WebM muxer that supports both single and multi-segment modes.
* WebM muxer supports MPD generation.
* Enabled WebM muxer and demuxer in packager.
b/22463220
b/25089245
b/25089714
Change-Id: I9f6e8fc51e08fbb1d685229c5cb54ea60f7bed8f
- Check whether if it can be parsed by libxml2 and check if the root
element is a 'tt' element.
- Added unit tests for determining TTML and WebVTT.
Change-Id: I4fea1881f0ab70970700601d8d7cea32cc04752c
Also update the code to generate CompressorName in VideoSampleEntry
for both AVC1 and various VP codecs.
Change-Id: I2355f8008a72806e852aa1ec6c80e9141b97d963
Also includes its dependencies, like media/base/text_track_config.*
and media/filters/webvtt_util.h
Change-Id: I5b26245daf004da19b912b7c5b2c21ce4ba85688
Uses EXPECT_NEAR for comparison with an acceptable error bound. Also
increases error bound to 50ms.
Change-Id: I8fc61b3b915a50f8fe33b9ea72e123aefee25a80
- Neither live with or without key rotation did not output the right
result.
- No key rotation: did not produce any ContentProtection element.
- With key rotation: did not have DRM specific ContentProtection.
- To get key rotation working with shaka player, <cenc:pssh> elements
are removed.
Change-Id: I1f34d303ae1f3ea81820e3368ab66b8420498372
- Added --iv to inject iv for fixed key encryption.
- Added support for key rotation in fixed key encryption.
- Added --use_fake_clock_for_muxer to set timestamp to 0 in the output.
Also updates stream info dump message:
- Modified pixel_width: %d\n pixel_height: %d to pixel aspect ratio: %d:%d
- Removed language from video stream info.
These flags should only be used for testing.
Change-Id: Iedf8d6d6492226219f49fe44d932645f557010e4
- ContentProtection elements were missing when using MpdWriter,
therefore mpd_generator also did not generate ContentProtection.
- MpdWriter uses MpdNotifier now, instead of directly using MpdBuiler.
- Add mock_mpd_notifier.{h,cc} to be shared by several tests.
Change-Id: Id0f6213aa0c80e50294cd4193962054b0b5c2492
Cropping is necessary if width/height are not exactly disivible by 16 due
to 16x16 macroblock size.
The width and height fields in VisualSampleEntry must correctly document
the cropped frame dimentions (visual presentation size) of the AVC stream
that is described by that entry.
Also fixes width/height in input mp4 and wvm streams if the values in
VisualSampleEntry / metadata do not match with the values in
AVCDecoderConfigurationRecord (SPS).
Issue: 39
Change-Id: Id55c5acf245bee3f4e66302b2042eb7d9c488c19
- Because MpdBuilder no longer sets ContentProtection, live was broken.
- For key-rotation, <cenc:pssh> element is updated.
Change-Id: I45bb80a12faff39ccf5deb82439c0732ed9cea59
- Without the Flush() method the implementation had to do writes in
almost all methods. Usually the user of the notifier knows when to
write out the MPD.
Change-Id: Ic165d4594f01357a8ac7e8501eefa0f85c08d32f
This fixes a circular dependency of media_base depends on filter and
filter depends on media_base.
Also added code to extract sar in WvmMediaParser if it is not yet
extracted when setting extra_data.
Change-Id: I1b5aef2444e4134c9b6663911ac5e5c4c220404a
- Width/Height in tkhd box should be display resolution instead of
coded resolution.
- pasp was not generated earlier.
- Assuming SAR as 1:1 if it failed to be extracted successfully.
- Also update test files for mp4_media_parser_unittest.
This fixes Issue #35.
Change-Id: Iedbe6a44465aac6723b6ea2de30aed180821eccd
- Call NotifyNewSegment() in MpdNotifyMuxerListener::OnMediaEnd() to
notify subsegments.
- This is necessary for MpdBuilder to calculate subsegmentAlignment.
Change-Id: I9359c408da4f616e543a6d9e568b010a90c90185
The segment duration was not reset after segment was finalized. It
was reset after adding one sample. This new sample was added to the
new fragment but was not recorded in the new segment, which resulted
in off-by-one error in the segment generation.
Change-Id: I1f9e00591be6b897773bf6caf94409b4bcd2277f
Rintaro Kuroiwa
Kongqun Yang
Haoming Chen
Haoming Chen
sylt
Joey Parrish
Yohann Connell
Chun-da Chen
Kyle Alexander
sammirata
Thomas Inskip
Gabe Kopley
Jacob Trimble
Bei Li
Anders Hasselqvist