This is an automated sync of policy documents for this organization.
The upstream source is:
de0823bbe4
Co-authored-by: Shaka Bot <shaka-bot@users.noreply.github.com>
This is an automated sync of common workflows for this organization.
The upstream source is:
be928d3061
Co-authored-by: Shaka Bot <shaka-bot@users.noreply.github.com>
Because we used require() to read build-matrix.json, the file could be
replaced with build-matrix.json.js, allowing code injection into our CI
pipelines. This fixes this vulnerability by reading the JSON text with
the fs module, then explicitly parsing it, rather than relying on
require().
This also changes the location of the file, to match its location in
other projects.
Note that this workflow is not currently giving any elevated permissions
to users, so it is not currently possible to damage the repo through a
PR. But this might have been possible in the past, due to
organization-wide defaults for token permissions (recently fixed). No
evidence has been found of past exploit.
See also https://github.com/shaka-project/shaka-streamer/issues/216 and
https://github.com/shaka-project/static-ffmpeg-binaries/issues/57
This is an automated sync of common workflows for this organization.
The upstream source is:
11128e0985
Co-authored-by: Shaka Bot <shaka-bot@users.noreply.github.com>
When uploading a live stream, if a single segment upload fails, we shouldn't give up.
This adds an option to ignore HTTP output failures so that a single failed upload does not result in a hung stream. See https://github.com/shaka-project/shaka-streamer/issues/195 for details.
These errors were specifically coming up in Windows builds and in Linux release builds. This initializes those variables.
This also fixes errors in IAMF tests like "offset 2 out of bounds", which some compilers raise when you try to statically initialize a vector, then add to it later.
Upgrading curl fixes errors like "Failed sending data to the peer" flooding the log. This is described upstream in https://github.com/curl/curl/issues/10591 and fixed in curl 8.2.0. Here we upgrade to curl 8.9.1 (latest as of today).
This required updating the way we attach c-ares to libcurl and updating CURLOPT_PUT (deprecated) to CURLOPT_UPLOAD (compatible equivalent AFAICT).
This embeds the full python protobuf library into the output in pssh-box-protos, which is used by installation targets and Docker images. Without this, the installed pssh-box.py tool would depend on a separate installation of the python protobuf library.
Closes#1436
As per issue #1418, several Dash roles are missing from the
RoleFromString function, making them unusable in practice. This update
should enable them for use.
---------
Co-authored-by: John Laurin <john.laurin@svt.se>
include/file.h is breaking header installation for the shared library build. macros/classes.h must be included to the public headers.
Closes#1406
Co-authored-by: Zaki Ahmed <zaki.ahmed.perso@gmail.com>
Co-authored-by: Joey Parrish <joeyparrish@users.noreply.github.com>
Support Dolby Vision profile 8.1, 8.2, 8.4, 10.1, 10.4 signaling in HLS
and DASH.
Adds new option `--use_dovi_supplemental_codecs` (off by default) to use
SUPPLEMENTAL-CODECS in HLS and `scte214:supplementalCodecs` and
`scte214:supplementalProfiles` for DASH.
To maintain compatibility with existing players the current behavior of
using two entries in the manifest remains the default. This will be
changed in a future version where `use_dovi_supplemental_codecs` will
become on by default.
Adds Dolby Vision compatible brands, 'db1p', 'db2g', 'db4g', 'db4h',
'dby1' based on https://mp4ra.org/#/brands
---------
Co-authored-by: Xingzhao Yun <xyun@dolby.com>
If color_space is VPX_COLOR_SPACE_SRGB, the specs says that color_range
should be 1 i.e. yuv_full_range = true.
However, yuv_full_range was initialized as false and wasn't set in the branch for color_space
is VPX_COLOR_SPACE_SRGB.
Fixes#990
---------
Co-authored-by: Joey Parrish <joeyparrish@users.noreply.github.com>
Currently `media_info.media_file_url()` is not escaped when placed into
MPD for things like BaseURL. This for example breaks when trying to us a
file name that contains special characters like &. Since these are
supposed to be URLs let's URL encode them.
Fixes#1107
---------
Co-authored-by: Joey Parrish <joeyparrish@users.noreply.github.com>
The option was never covered to the widevine docs when it was added,
requiring someone to read the source code or the --help to discover this
option.
Fixes#983
After change to add forced command line ordering adaptation set IDs in
places were referenced by their sort index (the minimum representation
index they contained).
Instead always refer to adaptation sets by their own ID, and use the
index only as an optional sort key.
Fixes#1393
Set the start number in representation to the segment index that is sent by muxer.
With this enhancement, you can now specify the initial sequence number
to be used on the generated segments when calling the packager.
With the old implementation, it was always starting with "1".
---------
Co-authored-by: Cosmin Stejerean <cstejerean@meta.com>
This PR adds parsing of teletext styling, and rendering of the styling
in output TTML and WebVTT subtitle tracks.
Beyond unit tests, I've used the sample
https://drive.google.com/file/d/19ZYsoeUfH85gEilQkaAdLbPhC4CxhDEh/view?usp=sharing
which has rather advanced subtitling with two separate rows at the same
time, where one is left aligned and another is right aligned. This
necessitates two parallel cues to be rendered. It also has some colored
text.
Solve #1335.
## parse teletext styling and formatting
Extend the teletext parser to parse the teletext styling and formatting.
This includes translating rows into regions, calculating alignment
from start and stop position of the text, and extracting text and
background colors.
The colors are limited to full lines.
Both lines and regions are propagated in the TextSample structures.
This is because the number of lines may differ from different sources.
For teletext, there are 24 rows, but they are essentially always
used with double height, so the number of output lines is 12
from 0 to 11.
There are also corresponding regions are denoted "ttx_R",
where R is an integer row number. A renderer can use either
the line number or the region ID to render the text.
## ttml generation for teletext to EBU-TT-D
Add support to render teletext input in EBU-TT-D (IMSC-1) format.
This includes appropriate regions ttx_0 to ttx_11 signalled
in the TextSamples, alignment and text and background colors.
The general TTML output has been changed to always include
metadata, layout, and styling nodes, even if they are empty.
EBU-TT-D is detected by the presence of "ttx_?" regions in the
samples. If detected, extra TTML elements will be added and
the EBU-TT-D linePadding used as well.
Appropriate styles for background and text colors are generated
depending on the color and backgroundColor attributes in the
text fragments.
## adapt WebVTT output to teletext TextSample.
Teletext input generates both a region with prefix ttx_
and a floating point line number (e.g. 9.5) in the
range 0 to 11.5 (due to input 0-23 as double lines).
The output is adopted to drop such regions
and convert the line number to an integer
since the standard only used floats for percent
values but not for plain line numbers.
They can still be skipped by passing `-DSKIP_INTEGRATION_TESTS=ON` for
the build configuration. Fix integration tests so they run correctly when building out of tree.
Use FindPython3 in CMake to fix build and integration tests on Windows.
The check for `!mpd_dir.empty()` is not needed because MakePathRelative
handles the case where the parent path is empty. As a result of this
check the base url, segment url, or segment template URLs were all
missing in cases where the mpd output was in the current working
directory.
Fixes#1378
The default .npmignore would disallow bin/, which contains binaries for
our NPM release. Every release before v3.0.3 was missing .npmignore, and
therefore had no binaries. These were unusable in NPM, and have been
marked as deprecated because of it.
Closes#1369
The release workflows did not run checkout with `fetch-tags: true`, so
the builds were unable to compute the correct release version number. I
audited all instances of `actions/checkout` to add `fetch-tags` where
needed and clean up unneeded options.
I also had to fix options to `docker/build-push-action`, which by
default ignores `actions/checkout` and tries to pull from git itself.
This led to the Docker build running in a context without the new tag.
Finally, to make verification easier and provide version info in the
build logs, this adds debugging info to the version-generation script
via stderr.
Closes#1366
Support for this came out in January, 2024. Explicit macos versions seem
to be necessary for now, until GitHub offers "latest" labels targeting
specific architectures.
Shaka Bot
Joey Parrish
Felicia Lim
SteveR-PMP
Wojciech Tyczyński
John Laurin
zaki699
Cosmin Stejerean
sr90
Cosmin Stejerean
Torbjörn Einarson
Vitaly Gashkov