Problem : Text samples have variable length and therefore act
more like continuous samples whereas audio and video
act more like discrete samples. Since we use sample
start time, a cue event could be inserted after the
start time of the last text sample and never get
inserted as there are no more samples.
Change : After all streams have requested flushing, we make sure
to collect all remaining cue events from the sync point
queue and insert them into each stream.
Issue #362
Change-Id: Id8f136f7ef53531f7a7f412613eac352324e0130
Create an end-to-end test for ad cues. This test's final result is not
correct but illustrates the problem we have in the cue insertion and will
be fixed by a later CL.
Change-Id: Ia8b43a53848941be52cf9ade018668e6477e8df2
Uses protobuf JSON util instead.
packager/base/json_writer comes from Chromium base. We are going to
replace it with abseil, which does not have a JSON library.
The code is much more cleaner now.
This is unfortunately, at the expense of increased output binary size.
packager binary increases by another 100KB.
Change-Id: I83a9217a484cad3c41147ad9a75311384347c49c
Use protobuf utilities instead.
packager/base/json_writer comes from Chromium base. We are going
to switch to abseil which does not have a JSON library.
This is unfortunately, at the expense of increased output binary size.
packager binary increases by about 300KB due to:
- Protos cannot be compiled with LITE_RUNTIME any more.
- Additional protobuf library needed to convert between JSON and proto.
Change-Id: I45a497376925b42d147ffcaabcfc2fa4dbdeacc1
In the cue alignment handler, instead of storing just one cue, store
a full queue. This will make it easier to handle text streams that
end before audio and text.
Change-Id: Ida97008fa015639350261bd3f76f4cb901747c66
In the cue aligner, instead of storing the cue event, store a
stream data so that we don't need to know the stream index when
sending the cue event downstream.
Change-Id: Ice27da021fad2872e2a23975b959630a9d43b736
This is in preparation of supporting entitlement license API, where
common encryption server may return concatenated PSSHs directly.
Refactored ProtectionSystemSpecificInfo into a struct containing
concatenated PSSHs. This will make it easier to pass PSSHs around.
Also, most of the time, users of ProtectionSystemSpecificInfo do
not care what is in PSSH; so moved PSSH box parsing and building out
of ProtectionSystemSpecificInfo.
b/78171767
Change-Id: I1c4d5e7e23efd2f7d4b2b9704378323112e47f00
To make it easier to understand what a video stream and a non
video streams is doing in the cue aligner, each stream type is
given their own functions.
Change-Id: I8b8ca403721bcb06ca3056004420902667a30f6c
Use a common hint for all stream states as the hint is always
updated when we get a new cue event. Cue events are only gotten
when be pass the hint, so there should only need to be one hint.
Change-Id: I0838110b9b10325a9e99f8fca0b11f0a6b48f8a0
To allow generating Widevine / Playready PSSHs if the corresponding
PSSH generator is specified.
Note that Key Rotation with RawKeySource is designed to be used for
testing only.
Change-Id: Icaf9e74955c082a7b000bd6a08f4561f2e01a2e2
By having 'disable-clang-format' in commit message.
If you have the script setup as git pre-commit, it can be disabled
by '--no-verify' option.
Change-Id: I6fb358e85105255fddde41f950e986c74b7defc9
Problem: Sending samples to the cue alignmenet handler did
not reflect what was more likely to happen. In our
tests we would send all the samples for one stream
then all the samples for another stream. This created
some special cases that would either not happen in
reality or miss cases that would likely happen in
reality.
Changes: Changes all tests to dispatch samples in an interlaced
pattern that better reflects muxed content.
Change-Id: I985092154b62eb12d95499663d195ca6c103bc19
In H265Parser::ParseSliceHeader, the parser does not handle
byte_alignment() from the spec. byte_alignment() reportedly contains
at least one bit, which is not handled right now.
See Section 7.3.2.12 Rec. ITU-T H.265 v3 (04/2015).
Also added a few size sanity checks in H265Parser to make sure the
code does not crash if an invalid input is provided.
Fixes#383.
Change-Id: I33b31396058fc5ba67a0fc119be5fe56ec9443b0
Packager uses ThreadedIO to write media segments and manifest /
playlists. There was a possibility that media segments write being
delayed and scheduled after updating manifest / playlists.
This CL fixes the race condition.
Also added a note on how segments can be synced to cloud storage to
avoid the race condition during file sync.
Also added a live WebM test.
Fixes#386.
Change-Id: Icf9c38cdec715fa3dc2836eab1511131e129fe41
Fixes#387.
Note that the output will not play in Chrome until the Chrome bug
https://crbug.com/837832 is fixed.
Change-Id: Ic3e917161cedfa773c0a18b4a5d7b1254c6f1313
The number of preserved segments outside live window can be
configured using flag --preserved_segments_outside_live_window,
which is default to 50, i.e. 5 minutes for 6s segment.
Note that the segment removal will be disabled if it is set to 0.
Only HLS live playlist and DASH dynamic MPD are affected by this flag.
- Also add end to end tests.
Fixes#223.
Change-Id: I8a566efebe2f1552c7d9509ab017bade5a4a1c98
Problem: The time scale for text was being set to zero in our tests
because it was never needed.
Change: This changes it to use MS as that is what's most common and
requires the least amount of changes.
Change-Id: Ia046ac1994b4cede079d2f801275c7f058d5bdd3
To move us toward no longer need to ensure order when building
our pipeline, use a map to share demuxers between stream descriptors.
This will even allow use to use the same demuxers in the text pipelines
while still building them separately from the audio and video streams.
Change-Id: I4d4dbddbc06adee36cbe7f4aa1f6769f7bb2a3f6
It is not always possible to align segment duration to target duration
exactly. For example, for AAC with sampling rate of 44100, there are
always 1024 audio frames per sample, so the sample duration is
1024/44100. For a target duration of 2 seconds, the closest segment
duration would be 1.984 or 2.00533.
This feature allows MPD generator to treat these segments as having
the same duration, thus allows MPD generator to generate less
SegmentTimeline entries and potentially no SegmentTimeline entries
(replaced with SegmentTemplate@duration instead if
--segment_template_constant_duration flag is enabled).
Under flag --allow_approximate_segment_timeline. Disabled by default.
Fixes#330.
Change-Id: I5044eaa348ebbf45bf792a2af53fc95a115ae21b
- Allow including Widevine and Common SystemID PSSH boxes
for PlayReadyKeySource.
- --playready_key_id and --playready_key flags are deprecated.
- --enable_raw_key_encryption already supports playready PSSH generation.
Addresses issue #245
Change-Id: I072d4f43a3239875959e4c5b1eb6854415d7367e
To ensure that we can parse content with style and region blocks,
this change updates the parser to skip those blocks so that we
can still parse the cues from a file.
Full style and region support will be added later this year.
Issue #380
Change-Id: I11b8fd862a108c27a5c67b15d4703532b44a1214
Removed the logic in MuxerListener to estimate bandwidth from file
size and duration, since it is not compliant to the spec.
MpdBuilder will estimate bandwidth from segment size and duration
if bandwidth is not specified in MediaInfo.
Here is the statement from DASH spec (23009-1:2014):
Consider a hypothetical constant bitrate channel of
bandwidth with the value of this attribute in bits per second
(bps). Then, if the Representation is continuously delivered
at this bitrate, starting at any SAP that is indicated either by
@startwithsap or by any Segment Index box, a client can
be assured of having enough data for continuous playout
providing playout begins after @minbuffertime *
@bandwidth bits have been received (i.e. at time
@minbuffertime after the first bit is received).
For dependent Representations this value specifies the
bandwidth according to the above definition for the
aggregation of this Representation and all complementary
Representations.
Fixes#376.
Change-Id: I0fddce39e709d0cded0a4c9ae59adbbcc97ec5ea
And for HlsNotifier and SimpleHlsNotifier as well.
This will make it easier to add preserve_segments_outside_live_window
param in a later CL.
Change-Id: I86d464fe247e04574158a0a76e39d8a122960ae4
The file_name fields will be used to solely indicate file paths on the
designated file system, and they are used to do normal file operations,
including file creation, file updating and file removal if needed;
added new xxx_url fields, for the URLs that should appear on DASH
manifest or HLS playlists.
xxx_url are the URIs of the media in the manifest. The fields are
converted from file_name fields but adjusted to be relative to DASH
manifest path or HLS playlist path, optionally with base_url prepended.
Previously the file_name fields are converted in place to indicate
URLs when passing to manifest / playlist builders. The original file
names were lost, which made it difficult to remove files outside of
live window.
Now that the input file names are preserved. File system APIs can
operate on the original file names while manifest / playlist generation
functions can operate on URLs.
Issue: #233
Change-Id: I36a64f16e3d1261ce91783a86588f24ad1371662
According to DASH spec (23009-1:2014):
Consider a hypothetical constant bitrate channel of
bandwidth with the value of this attribute in bits per second
(bps). Then, if the Representation is continuously delivered
at this bitrate, starting at any SAP that is indicated either by
@startwithsap or by any Segment Index box, a client can
be assured of having enough data for continuous playout
providing playout begins after @minbuffertime *
@bandwidth bits have been received (i.e. at time
@minbuffertime after the first bit is received).
For dependent Representations this value specifies the
bandwidth according to the above definition for the
aggregation of this Representation and all complementary
Representations.
This suggests that max bitrate should be used instead of average
bitrate.
Also cleaned up BandwidthEstimator code.
Fixes#376.
Change-Id: Ibf5896394c5c6bb820849771a2129c59202d2273
Content-Type for Widevine key request was incorrectly set to text/xml,
but it should be application/json.
Also added VLOGS for curl calls.
Fixes#372.
Change-Id: I4230795a582112c6d9c12883b5e61481b63284aa
Two-character ISO-639 code in --default_language was ignored due to
a bug in language code matching as the language code in stream is
always converted to 3-character code.
Fixes#371.
Change-Id: I8618938af583a417446636ff9efe1c72ce822c33
This flag was introduced to workaround a rounding error in Chrome
(probably in other browsers too).
Also although this flag avoids the first frame of a Period to be
dropped due to rounding error but it could cause the last frame of a
Period to be dropped.
Now that we use a high precision Period@duration, we do not expect to
see rounding errors any more. The player would be a better place for
the workaround even if it is still needed.
Related issue: #368.
Change-Id: I3bd517ecc6d548ff62e0c13394edb49d4bc68e8f
Instead, the actual earliest presentation time is used except for
the first segment if there is an offset between presentation time
(pts) and decoding time (dts).
Chrome (as of v66) reports dts instead of pts in buffered ranges in
MSE API. To avoid breaking Chrome, the earliest_presentation_time
of the first segment is set to its dts as Chrome does not like negative
values for
adjusted dts = dts + Period@start (0 for the first period)
- presentationTimeOffset (earliest_presentation_time).
Fixes#303.
Change-Id: I5ca80e05d5570961400499436f2bcc01f06e69e0
The WebVtt Output Handler did not recognize cue events. This change
allows the handler to accept the events and tell muxer listener
about them.
Issue #362
Change-Id: I7c3318b72e539adc19af587c8e213fdb0af8290b
UTCTiming schemeIdUri and value pairs can be provided to packager using
--utc_timings flag. It should be comma separated list of
schemeIdUri=value pairs.
Note that urn:mpeg:dash:utc:direct:2014 scheme is not supported as it
requires the MPD to be dynamically generated on the fly when MPD is
served to client.
Fixes#311.
Change-Id: Ibc07af8a6d8b2b6261ba3ecd2c02f23809f96614
Chrome internally uses time accurate to microseconds, which is
implemented per MSE spec (https://www.w3.org/TR/media-source/).
Generate Period@duration with better precision to avoid possible
buffered range gaps in Chrome (possibly other browsers too), which
may lead to other problems like playback stall.
b/74238961
Fixes#368.
Change-Id: I357a0f62b67f75c7ca044bb99ea4e3c8bbb6fecd
Created "Chain" function to connect a series of handlers together so
that the connection is easier to read.
Changed other calls to use RETURN_IF_ERROR to help make it easier to
read as we no longer need to track the status variable anymore.
Change-Id: Iffb76ca395b6d62f8feb054c09470c77718e8feb
Created a media handler to come after parsers that will handle filling
in gaps between text samples. The padder takes a min duration, and if
the samples do not cover the min duration when flushed, one last empty
sample will be injected so that the samples will go up to the min duration.
Change-Id: I88605059664d09279676edac418ff3d4990d7556
Updated TextChunker to handle incoming CueEvents. Connecting the
text chunker with the cue alignment handler will happen in a later
CL.
Issue: #362
Change-Id: Ib1fa9f457cf4ec0ce413dadcfa7eed5895ecd628
Move the webvtt segmenter to the chunking directory so that it
can be converted to a general purpose text chunker.
Change-Id: I9ecd7ee39cb73070dab07b64f65ef24af1404813
Now that we have the end-to-end tests, we no longer need the webvtt pipeline
tests to verify that it is working.
Change-Id: I4ebec34e66eda67c40999d8802b447e2551e1fa6
It is now managed in SimpleMpdNotifier.
This avoids unnecessary increment in AdaptationSet id counter.
Also makes sure the AdaptationSet is sorted by id in XML output.
Change-Id: Ibcd0b047a71c19cd30ad7d8af9a2ed0bb05e043e
SyncPointQueue manages all cue points and returns aligned cue
points to the callers (CueAlignmentHandlers).
CueAlignmentHandler is responsible for aligning cues from different
streams. It uses SyncPointQueue internally to align / synchronize the
cue points.
Issue: #355
Change-Id: I281fecb46a3ca7172d71e7495bdd07b8efdeb283
This changes almost all encrypted tests to use DiffDir. The remaining
un-updated tests are tests that won't match every time.
Change-Id: I858bbaa0beea34887cc3100eb784aa2aecd5a0a5
Change MediaInfo media paths in test output to only use the filename so
that they can be compared between test runs.
Change-Id: I26bb3f5ce79a83400b8a162c61cf5b54e41f9c70
iframe playlists will be given a name based on the output name of
the main stream. This is done to ensure unique filenames between
different video output streams.
Change-Id: Id0de9c5834599e9d896243e30569c55f34e7cd68
Instead of using the test file's index in a list to create the output
name, use the original filename and the descriptor.
This caused some problems with file name collisions when some tests
were using the same name. That was fixed by changing the names. This
will go away once they are transitioned to use DiffDir like the other
tests.
Change-Id: I0a4c480406705ca63fcea61c86c67d4a5f739295
This is called when reaching end of the file of the media. The duration
of the media is updated.
Fixes#340.
Change-Id: I446f2d341b02125d4a7d8c958bda269b5403cb9c
Created a method to compare test output for live tests. This wraps
CheckTestResults but first replaces the times that would diff between
manifests.
Change-Id: Iafb51a28a9bcb9f32b210c6d76bf23e2b9a3e0d6
This require a change to the update gold method as it would not
create nested directories. Instead it deletes the old directory
and copies the whole new directory over. This made the code simplier
and far-less error prone.
Change-Id: I1da5d9bda171b0f106d1425b204139dfbcb39b42
To make working with file names easier in packager_test.py _GetStream
the full path is not created until needed so that multiple paths can
use the same root filename.
Change-Id: I23a9231433b22ab5cef9b88bd6359f351da56eda
Changed all output file names (not paths) to follow the pattern that
any qualifier (e.g. trick play) will be join the current name using '-'
but will use '_' within itself (e.g. trick_play_1).
Change-Id: Ib0247bf1ca6d94815fedaaf73d3a400d31c20c40
We have an assert that ensures that the end time is greater than
the start time for any cue. However we never checked that cues
had a non-zero duration when parsing them.
We will throw away cues with a duration of zero (and print a
warning message) as they are not spec compliant.
Closes: #335
Change-Id: I404e8f3a5a8d43eff75a2554db3e38e8d340f421
In the video captured by Android's default camera app, meta box is written as
as Box instead of FullBox specified in the spec.
Closes#319.
Change-Id: I526492fdd505d5929c5161cb1ed1503b724de7e9
Prefer timestamps from Video AdaptationSets if available - this avoids
possible video playback jitters due to gaps.
presentationTimeOffset is not applied to the first period as it may in
negative dts which Chrome does not like: https://crbug.com/398141.
It is safe to apply to subsequent periods as the actual offset applied
takes Period@start into consideration:
offset = Period@start - presentationTimeOffset
The result timestamp with offset applied is close to Period@start, so
it is unlikely to result in a negative dts value.
Closes b/73899306.
Change-Id: If8361f5469610093b3aac6675754536ad7e83c4c
This change has the hls master playlist add the text codec string
to the list of codecs in a variant.
Bug: 72942756
Change-Id: Ib25bb2064a291d10d7b1d261a4307991df62220c
Updated as many tests as we easily could. The tests that were not updated
all use live manifests or encryption that all require some "help", either
by dealing with times differing or with verifying decryption.
Bug: 73830478
Change-Id: I6803c2d960b71b459eb57b7a5e562164bb713e2a
Created GetStream, a function used to get the stream descriptor for a
single stream. This allows for finer control over the stream compared
to the batch GetStreams.
Added "trick_play_factor" to GetStream so that the trick play factor
did not have to be added the stream descriptor value and "injected"
into the stream.
Change-Id: Ifbde64b961a673aafa5f6d21f33a68d02fb46610
Created end-to-end tests for the segmented webvtt text in HLS. The
text stream is longer than both audio and video, so there are more
text segments than video/audio.
Change-Id: Ib860ccd3f2ac0048983fdeebe3847a0b9dcbc160
Created a method to diff the output dir against the golden copy
of the output dir. The goal with this is to simplify our end-to-end
test structure by removing the need to track the output files within
the test runner.
With all the golden output in one directory, this makes it easier to
setup end-to-end tests and even allows the golden files to be playable.
This should not affect the repo size too much as duplicate files will
only be stored in the git object store once.
Tests will migrate to this in separate CLs.
Change-Id: Id1be9f8f60c9e362b9b615445dd8ca7da996af4c
Changed the "live" setting in _GetStreams to be "segmented" so that it
make sense in a more general sense.
Change-Id: I2ceaad67653e1e2237533b68fccbc9fe3fabfc9b
When converting from NAL unit stream to byte stream.
The packager should not assume the parameter sets in the sample is the
same as the parameter sets in sample entry (decoder configuration).
Fixes#327.
Change-Id: I7e84d28a296f4b33db0523cca5eabd62f623e852
Looks like Safari does not like v0 tenc box.
- Use v1 tenc box for cbcs and cens protection_scheme as required by
CENCv3 spec.
- Set crypt_byte_block and skip_byte_block to 0 for full sample
encryption cbcs and cens.
Fixes#326
Change-Id: I5581cd856fffc4ff104d950f3ca19b9337d57a78
Create a StreamDescriptor class that can be used to build the stream
descriptor command line argument.
Change-Id: Ifcba4f37d69a1a36c4add51a2a10c3f0c8b2ccd7
The old vtt sample data has the header as "WEBVTT FILE" which does
not reflect what the spec says it should be.
This changes it to "WEBVTT" as described in the WebVTT spec.
Change-Id: Ib54396a8b937501a835dafe966bf05b95b0b22c4
When a gap is found in the text stream, the WebVtt to Mp4 converter will
now output the special empty vtt cue.
Change-Id: I8be88c6b7589aa120a2215e1e4b8e98031fe326d
Closes: #324
- Add empty lines between different types of renditions to improve
readability.
- Group variants with the same audio/text group together, as it is
where the Adaptation occurs.
- Write master playlist after writing media playlists. This makes
more sense and it is also necessary to have the bandwidth of
the last iframe playist segment correctly computed.
- For fMP4, I-Frame segment must include the 'moof' header.
- Fix a problem that hls_iframe_playlist_name is not passed to
MuxerListenerFactory.
Issue: #287
Change-Id: Icf37c5de1dc29f85ae3f419cbc3264d04ca491a4
Adding all the code needed to allow the webvtt to mp4 converter to
send empty vtt cues. This change does everything except writing the
mp4 box.
Bug: #324
Change-Id: I16188e6357632b2ed06f7e9bab7844f093266696
Instead of always tracking segments with an index, this change makes a struct
that will act as the segment and track which segments are in it. Each
segment will store all the samples in the order they were given, it will
avoid any sorting.
Closes: 72867775
Change-Id: Ic5829161510fe8f3320d960c3bc4a276c26ff3be
Create WebVtt test that shows that the current implementation of the
webvtt segmenter does not respect the input order of cues.
Bug: 72867775
Change-Id: I811b3a93c10650e0cf9290c9c0c1680f562deb30
Took the same logic for DEFAULT and AUTOSELECT used by audio and
applied it to text. Combined the build tag logic for audio and
text as they were the same expect for a couple fields.
Bug: #205
Change-Id: I75ecbf4b25cd559b826982d12a5b132e70b83b69
The master playlist and media playlist did not have implementations
for handling text streams. This change adds support for both.
Bug: #205
Change-Id: I1329b8cc2585f15b89959071db9dd16d35847cba
If no hls group name is given, we would default to "audio" but as
we are working to support text, this won't make sense to see
GROUP="audio" on a text stream.
Instead default to "default-audio-group" for audio streams. A specific
text default will be added later.
Bug: #205
Change-Id: Iefc8bfd35708286619d0004348294d98f2c38482
In the master play list, use a class called variant to build
the video tags.
The variant list will always have one entry. In the case that there
are no audio streams, the variant list will have a null entry.
Bug: #205
Change-Id: I6e4acd83a31cd267c173e4f4c910f93781fe6efd
According to the HLS+WebVTT spec, if there is no text in a segment
a webvtt file with no cues can be added to the manifest. By outputting
empty segments it allows the accumulated duration in the Master Playlist
to better represent the duration of the text stream.
Spec Reference: //tools.ietf.org/html/draft-pantos-http-live-streaming-23
Section 3.5. WebVTT
Bug: #205
Change-Id: I5de01200fd9fa99c57949c773e8ee926b0f6ba8a
It was the same code to make the media playlists for each test, so this
change moves that logic into common functions.
Change-Id: Ifb8680247ad4335332251815a2db5d56d28151aa
- Removed SetError, Swap, Matches functions, which are not used
- Added moveable version of Update function
- Added VLOG(1) warning in Status for non-ok status
- Replaced OS_WIN with _WIN32 as OS_WIN may not have been defined.
Change-Id: Ib6b7aab6e6fee270937b150f1e4bf993e914a568
Moved the file copy out of StreamInfoToTextMediaInfo as the file
copy is only needed by the MPD output but the Media Info is needed
by MPD output and media info dump.
Bug: 36138902
Change-Id: Id233f2041b3e72345b8f709791c6b6070484222f
The IV was incorrectly updated across samples.
Created a new cryptor SampleAesEc3Cryptor specially for SAMPLE-AES
EC3 encryption / decryption. The new cryptor uses constant-iv, and
makes sure the IV is reset to the initial value at the beginning
of each audio frame and chained across syncframes within the the
audio frame.
Also added E-AC3 end to end test.
Fixes#279
Change-Id: I0aa60c17836daeef5ba433a05e5ff0906191d9ac
There could be rounding errors in MSE which could cut the first key
frame of the representation and thus cut all the frames until the next
key frame, which then leads to a big gap in presentation
timeline which stalls playback.
Adjusting presentationTimeOffset (PTO) by -1, i.e. backing off PTO by 1
to compensate for the possible rounding error. It should not cause any
playback issues as it is small enough. The workaround can be removed
once the problem is handled in all players.
The PTO adjustment is configurable with command line flag:
--pto_adjustment, with value set to -1 by default.
b/71808910
Change-Id: I9c4d1e2ee84008b859a3638a8146c910cead1f15
Instead of using next segment start time, as CueEvent time may not
align with segment start time exactly.
Also remove the incorrect DCHECK in ChunkingHandler when processing
kScte35Event.
Change-Id: I4987740c99c8d0d25c9b99bddc5e557e45d308e0
According to HLS spec: https://goo.gl/MiqjNd 4.3.4.1.1. Rendition Groups
- A Group MUST NOT have more than one member with a DEFAULT attribute of
YES.
- Each EXT-X-MEDIA tag with an AUTOSELECT=YES attribute SHOULD have a
combination of LANGUAGE[RFC5646], ASSOC-LANGUAGE, FORCED, and
CHARACTERISTICS attributes that is distinct from those of other
AUTOSELECT=YES members of its Group.
We tag the first rendition with a particular language in an audio group
with 'AUTOSELECT'; it is tagged with 'DEFAULT' too if the language
matches --default_language.
Fixes#315
Change-Id: Iacc0bc8c89ebffce8717fa65e82d6daf5a1f6adc
When transmuxing from TS to MP4 if there is emulation prevention
bytes in general_profile_tier_level_data.
Fixes#312
Change-Id: I48857046c1ea4bed4f455d03d060551e3ef4bec8
Added new path to allow webvtt text input to be written as
webvtt mp4. This will happen when the input is a vtt file and
the output path is a mp4 path or the output format is mp4.
Missing test content for this.
Close: 70990714
Change-Id: Idbb4023db4a126a560528e73801f762cc45f4685
Moved muxer listener creation into a factory so that it can be
initialized once and then the factory only needs to be passed
around rather than all the parameters.
Change-Id: Ibf7df66c08debddbe6f6ff8995e7910b9ad17f3f
Use a mock muxer listener so that we can verify that the webvtt
output handlers will write to a manifest correctly.
Change-Id: I0294a998bfaf06a6d8f7d4c287fb014839b38f73
To remove the direct dependencies between packager.cc and the different
muxer implementations, this change remove the muxer factory to its
own file.
Change-Id: I4a1503c493f0f4d10a67e78461f96da3f4238944
Connected the WebVtt Pipeline together to test that the parser,
segmenter, and output all work together as expected.
Change-Id: I07138f7b5b1318f84c27c5b607d8df207c57ddb3
Also added Period::GetAdaptationSets and
AdaptationSet::GetRepresentations.
Instead of implementing GetDurationSeconds in all MpdBuilder classes
(MpdBuilder/Period/Adaptation/Representation) like what we used to do
with GetEarliestTimestamp, the two new functions allows MpdBuilder to
iterate through the Representations to get durations.
Also updates GetEarliestTimestamp functions to use the same iteration
method.
Change-Id: I682b70c07c248c0f6511ec3d9019086f986ee10e
Linked together all the handlers to create the HLS text pipeline.
This change does not include tests for the pipeline.
Bug: 36138902
Change-Id: I32e7a7cefae1e7c74ec6d0bdc6335c0d65e5e79c
Changed muxer listener to use "default" instead of {}
when defining its constructor and destructor in its
header file.
Change-Id: I3c80e808aa624293c3d7720ac6a47b470a663312
This change adds the missing code for passing mp4 text through
the pipeline.
This introduces the MuxerFactory to simplify creating muxers.
Change-Id: Ic7be1a2e0ff4b720a01061edb43aded946d05a47
- Update curl to 7.57.0
- Roll clang, which is needed due to MacOS / XCode update
- Fixes and suppress compilation errors due to clang update
Fixes#285
Change-Id: Ibac3288c641861605c3c0500d34d27373e6eecfe
This change introduces handlers to output WebVtt text files. There is
only one output but there is a common base to support others.
WebVttOutputHandler which handles all communication with other handlers
and WebVttSegmentedOutputHandler is responsible for listening for events
and choosing when and where to write cues and headers.
Bug: 36138902
Change-Id: I2b13a94262554398e66fee8cf024aa21041ddbab
Instead of having multiple char readers, one for strings and
one for files, just have one for files and use memory files
when testing.
Change-Id: Id1a2230046ba540ddf69ca10edb3edc74d2419b6
To better align with the Chunking Handler, the Text Segmenter
now outputs the SegmentInfo at the end of the segment rather
than the start.
Change-Id: If69ab951947d00779b4b63a52c4b6662bbdc4c0d
Move AdaptationSet related functions to the new Period class, which
maps to <Period> element and provides methods to add AdaptationSets.
Change-Id: I0fee290769fbe9a6355cc1b8c86baec8fbc4b4fd
Clean up DashIopMpdNotifier to make it easier to add Period class.
- Consolidate protected AdaptationSet grouping related logic to the
internal ProtectedAdaptationSetMap class
- Clean up AdaptationSet creation logic and updating logic
Change-Id: Idd5b39bb89d38e490ca4f561a6b840ccc9f1e40a
Implemented a MediaHandler that takes text samples and creates
media samples. The data in each media sample is the MP4 box for
non-overlapping cues.
As per WebVtt in Mp4, all cues must be non-overlapping. This handler
takes care of grouping and dividing cues.
Bug: 36138902
Change-Id: I0c1d27964180c14a22cb200591f70e46e04a651f
- Add --time_shift_buffer_depth to HLS doc.
- Fix a problem in HLS tutorial
Partially address #304, fixes#305
Change-Id: I60bc1eb659a30beb0a6ab73433f4cc99a7deab07
This change creates the webvtt segmenter which will be used for
segmented text webvtt for HLS. It takes a stream of text samples
and injects segment info messages based on the segment duration.
It is possible for samples to extend between segments, if so the
sample will appear twice (once in each segment).
Change-Id: Iae0134ee61cf269948026086520b6d3f8ce3785b
Took the WebVTT Media Parser and created the WebVTT Parser
that will take in a file and output a stream of cues that
will later be passed to another Media Handler that takes in
cues and chunks them.
Bug: 36138902
Change-Id: Ic77813fe19678e85d500269e69f46917510ab7ec
Moved from mpd_unittest.cc to representation_unittest.cc.
Also removed unused test data files in packager/mpd/test/data.
Change-Id: I23811390b4b1ffbfac3e69c1ffcf92544099a53d
Move AdaptationSet related tests to adaptation_set_unittest.cc and
Representation related tests to representation_unittest.cc.
Change-Id: I360e9aea3ba08a32e5ba3b0e8b34345f2b3f0b20
Added gMock matchers for matching xmlNodePtr and its attributes.
Clean up mpd_unittests to make it easier to separate adaptation set
tests and representation tests.
Change-Id: I31816b06e9c76f92d4a82656c659f3b9acae8cb5
Moved all code dealing with jobs into its own class so that the
packager code does not need to worry about initializing, running,
or stopping jobs.
Change-Id: I3e9ef1f22bd93d671f77d59ad15f23d1239078cf
As specified in HLS spec (https://tools.ietf.org/html/rfc8216):
All audio EXT-X-MEDIA tags SHOULD have a CHANNELS attribute. If a
Master Playlist contains two Renditions encoded with the same
codec but a different number of channels, then the CHANNELS
attribute is REQUIRED; otherwise, it is OPTIONAL.
Fixes#299
Change-Id: Ic2308c39b170178b11cb0d94c3a8083c8b5f3353
Seeing some failures on some platforms when compiled with clang
disabled:
GYP_DEFINES="clang=0" gclient runhooks
Several changes to make it work:
1. Mark packager code with packager_code=1 in GYP definitions.
2. Disable a few checks in non-packager code, which we do not have
direct control: dangling-else, deprecated-declarations,
unused-function
3. Fix the relevant errors in packager code.
4. Revert HAVE_STROPTS_H in curl config which is not available in
all linux distributions.
Fixes#286Fixes#293
Change-Id: I729b41f99403c5ad9487c6cc4a7dc06f6323cef8
1. Expect the time elapsed to be greater than kTimeout instead of
approximately equal to kTimeout if there is a "wait";
2. Expect the time elapsed to be smaller than kTimeout instead of
approximately equal to 0 if there is no "wait".
Also rename a variable in packager.cc to better reflect what it is.
Change-Id: I67975a6263b8dbc1124b78feae0f8e0d112bda50
It aligns with what a lot of other apps are doing, e.g. tsplay.
Also added notes in docker to adjust network setting if wants to use
multicast in docker container.
Change-Id: I666a8979cc041c904f7ff8e3e022f800c0830d5d
The error is logged only once to avoid log spamming.
Added definitions for the unsupported stream types for easy look up.
Change-Id: I097e2f05759bc84ef03f264cfabd2fb20da7c711
This patch also fixes a bug which was introduced in
https://widevine-internal-review.googlesource.com/c/packager/+/38040
where it was inconsistently assumed that AdCueGenerator would be MIMO
while connecting with other handlers and at the same time it was assumed
SISO in the AdCueGenerator class. Now we assume SISO everywhere.
Change-Id: Icd8c40b5ccfe0d98f47f09a60ea1635f74dceef9
The spec allows having more than one 'mdat' boxes even if it is not
used.
This is happening on some mp4 files in the wild:
http://www.sample-videos.com/.
Fixes#298.
Change-Id: I729cc94bee095560b5c4b3ee8511323f25f7ad5a
Implemented E-AC3 MPEG-2 Stream Encryption Format for HTTP Live
Streaming specified in https://goo.gl/1sgcwY
Issue #279
Change-Id: I36c1a05e3d0529ff810eaf52bdca45414baa93eb
Audio samples per frame for AC3 was not specified correctly earlier.
Also the number of channels is not correct if LFE channel is on.
Issue #165
Change-Id: Ibf20aa4c7aec43c07ec7cd394d631c537cb387dd
Implemented MPEG-2 Stream Encryption Format for HTTP Live Streaming
specified in https://goo.gl/N7Tvqi.
This change also moved ProgramMapTableWriter creation from TsWriter
to TsSegment.
Issue #165
Change-Id: Ia89dd16a5e6405706dd3d85ec6b6de580f7b13a7
The keys can be specified in --keys option, with the form of
label=<label>:key_id=<32-digit hex string>:key=<32-digit hex string>,label=...
There can be multiple "label=..." block. The DRM label can be one
of "AUDIO, SD, HD, UHD1, UHD2" or a custom label.
Mark --key and --key_id as deprecated. We can achieve the same result
with --keys=label=:key_id=<key_id>:key=<key>.
Also add a new optional field in stream descriptor: drm_label, which
is used to overwrite the internally generated DRM label for the stream.
If not provided, the DRM label is generated automatically based on
audio/video information, e.g. resolution.
Code changes:
- Merged RawKeyEncryptionParams and RawKeyDecryptionParams into
RawKeyParams.
- Make FixedKeySource accepts RawKeyParams as input.
Change-Id: Ic8c2f071cc71188e13f14bc6396fc2b3ffa5cac6
Problem occurs when the media playlists are in a sub-directory under
master playlist. If base_url is not set, segment URL should be
relative to the media playlist.
This only affects fMP4 as TS does not have init segment.
Fixes#253
Change-Id: Icddd9ed500d0a705e8b3260bfd4e916ecbba3f28
To help isolate the differences between audio/video and text in
preparation for adding the better text support, this change moves
all audio/video job creation and text job creation into their
own functions.
Change-Id: Ia71cf82ac147672b70c69123eeabdfc6b41c4a3d
This fixes shared_library not able to compile problem.
Also removed StreamDescriptorList and replaced with expicit
comparison to make the code clearer.
Also removed an out-dated DCHECK that mpd_notifier and hls_notifier
does not co-exist.
Change-Id: I3d04b8880741fecf0931a764cc12e50aa5e392b9
Use std::shared_ptr<const uint8_t> with a custom deleter to
represent MediaSample::data_ instead of std::vector<uint8_t>.
MediaSample::data_ can be shared by multiple MediaSamples and it is
immutable. A new data instance must be created if the clients want to
modify the underlying data. The new data instance can be transferred
to MediaSample using provided MediaSample::TransferData function.
This avoids unnecessary data copying.
Change-Id: Ib59785a9e19d0abb3283179b12eb6779ee922f79
Took the test structure for trick play and made a common test
structure that can be used for new tests. The next tests to
use this structure will be the new WebVtt pipeline.
Change-Id: I5faca306b8a2bd16b9f945d1ff5c336aed82bc35
This change create some matchers and text functions that
will be used by the upcoming webvtt work.
Change-Id: I2d7931d1bdabd761f74e8aee7524d5ecfb7cfdc4
Before the trick play handler would have one input and multiple
outputs. The normal media handler API for adding handlers had to
be ignored when setting-up the trick play handler.
This changes the trick play handler to have one input and one output.
It uses the standard AddHandler method calls. When initialized, the
trick play factor must be provided.
This included a run of 'clang-format' over all edited files.
Change-Id: I7b3cdf0a2472e2f89ab194867c4b984e26f18f24
To allow more tests to use the MediaHandlerTestBase and get access to the
helpful creation methods, this change moves the use of FakeMediaHandler
and setting up the graph to a sub class.
Change-Id: I90dd151e3c96d8fbe4bd02a1d6b11e66a279d95b
Created media handlers that make testing a handler easier by providing
methods to send messages from upstream and check messages downstream.
Change-Id: I7b3ba3a51bcf0d73bcaacd46b2dcbc16f87d8694
Moved build instructions and docker instructions to separate docs.
Removed command samples which are no longer needed as we have better
tutorials now.
Change-Id: I340c5653a6553158325970dd86d76fa11e69bcbd
In prep for changes to Trick Play, we want to make all messages
copy on write so that if the same message is sent to multiple
handlers, it is not possible for one handler to change the data
another handler is using.
Change-Id: I554166ca11c532412e4dfced5603972ca24dc2bb
Problem occurs when the media playlists are in a sub-directory under
master playlist. If base_url is not set, media segment URL should be
relative to the media playlist instead of the master playlist.
Also make sure the path separator is "/" in URL instead of "\" on
Windows.
Fixes#253
Change-Id: I8e933750276435d94dd01bfa53ee2bc050dfd193
Previously packaging completes successfully without any error
or warning.
With the fix, an error will be reported if write fails. It may
appear as "Cannot close file error" as we use threaded IO, which
could delay the error reporting until Close() call, so the user
of the File API needs to make sure Close() returns successfully.
Also fixed a deadlock in threaded_io_file if internal_file->Write
fails.
Fixes#160
Change-Id: I17f945150fb4021d2dcdbe784e557673f53ca583
Doxygen should run under src/ directory:
$ doxygen docs/Doxyfile
Outputs are created in out/doxygen.
Change-Id: I9dd1a9aa158851d37ff9a2e37f701757eb3e577c
To ensure that the style data is formatted correctly, changing the
set_style method to AppendStyle so that joining values will be
done in controlled setting.
Change-Id: Ia88e2d260b11339e6777ff018813e8aeb802a501
There are multiple functions we use to verify input from the user
and must of them would return a boolean expect for the top level
function which would return a Status. Each function would log a
message but to the user the error was not clear. This change makes
each verify function return a status so that the actual problem
will be surfaced easier.
Change-Id: I12ab43f8ca3a4d379b4309336644a70eb8cbbbe0
Implemented the other end of the webvtt timestamp parsing as it will
be needed when we write out WebVtt files. Also changed the name of
the parse function to be more inline with the writing function.
Change-Id: I1f36ddbbf80028732b4cb1b15e871dec17767f63
Inside of CreateRemuxJobs, we would take a status value from another call,
log the message, and return a boolean. The caller of CreateRemuxJobs would
then create status from the boolean.
Now we will pass the status value from the other call directly to the caller
of CreateRemuxJobs. So that failures can be better communicate in our code.
This includes a pass of clang-format over packager/packager.cc.
Change-Id: I071e7bad13f916e963641b9e53699573fe1060ed
Rewrote the RunRemuxJobs function to use waitable events so that we never
get stuck waiting for a job to finish before getting to a thread that
has already exited.
This should allow us to end execution when a job failed rather than
waiting for all jobs before the failed job to finish.
Closes#94
Change-Id: I413f62561a7a4cab83b8905e75986230b6c498bc
Created a handler called OriginHandler that can be used by the Job class
(previously called RemuxJob). Origin handlers represent the start (or
origin) of a pipeline (chain of handlers).
Change-Id: Ibd748ae0a932b6e0ebb879ea292fcb83c548214b
Support generation of fairplay key system tag: "com.apple.streamingkeydelivery" when --pssh
includes fairplay key system id:
// Unofficial fairplay system id extracted from
// https://forums.developer.apple.com/thread/6185.
const uint8_t kFairplaySystemId[] = {0x29, 0x70, 0x1F, 0xE4, 0x3C, 0xC7,
0x4A, 0x34, 0x8C, 0x5B, 0xAE, 0x90,
0xC7, 0x43, 0x9A, 0x47};
Closes#258
ImportantFileWriter::WriteFileAtomically uses mkstemp internally,
which set file permission to 0600, which is not what we want.
Update the code to not use mkstemp instead.
Also updated temporary file name logic to include process id in
the name so it can be unique across processes.
Fixes#259
Change-Id: I2d5a375925cf552bc0db5269f409d7522e63fca5
This avoids interference caused when two sockets are bound to the
same port in different multicast groups.
Fixes#241
Change-Id: Iba1b3300e3850f1f268886b7a49f5a3315d95b80
Derive file size from media ranges instead.
Also fix subsegment range reporting for WebM (internal variable,
no output affected).
Change-Id: I5f8152dff4c2cd5fbae5550992b86a669e278f7b
- The master playlist should have the display resolution instead of the
encoded resolution.
- Changed MediaPlaylist to return display resolution.
Change-Id: I162727d0bdeed0302518286e42a22b69a58fc4a3
- Use byte range format if segment_template is not set in MediaInfo.
- Change HlsNotifier::NotifyNewSegment() to take start byte offset.
- Change HlsNotifyMuxerListener to cache the segment information if
MuxerOptions::segment_template is set.
Change-Id: Ida1b8b9198acc5c43e3a5d9a641c78c81bc9a6ac
- Changed OnMediaEnd() to take (sub)segment ranges.
- Define a structure to pass the ranges.
- This requires muxers to "cache" the segment ranges but in most cases,
they already do it, e.g. 'sidx' for mp4.
Change-Id: I16b974c1f0f54ca658cc6dbe605efff84a3f52eb
In the original manifest updating process, the file was truncated first
before was written with new contents. There is a small chance that
the web server may read back empty file or incomplete file.
The new code makes the update operation atomic (by writing to a temporary
file first then replace the old file with the temporary file).
Fixes#186
Change-Id: I2fd564cb12b922b032c0e9f70d2132a5b12ff098
- Remove the TS key rotation not supported check as there is nothing
to be done for key rotation in TS for SAMPLE-AES.
- Fix IV updated problem in new segments even if crypto period does
not change.
- Avoid duplicate EXT-X-KEY tags if it does not change.
- Make EXT-X-DISCONTINUITY-SEQUENCE match with number of removed
EXT-X-DISCONTINUITY.
- Added end to end test for HLS with key rotation.
Change-Id: I73cb82e9f5575fcdf63ee643228efe78e6766302
Resolving TODO in packager/hls/base/master_playlist.cc that asked for
media playlists to be grouped when they are added.
Change-Id: I01c7687400bc74ce45f271d0242d1c3bf3610cf2
- This fixes the issue when one NAL unit has multiple
subsamples, which is allowed in spec and could happen
when the clear_bytes exceeds 2^16 bytes.
- The new algorithm updates the subsample entries in
following steps:
1) When NaluReader parses a new NAL unit, the
function splits subsamples and align them with the
NAL unit. It also finds the range of subsamples
for that NAL unit.
2) Drop or update subsamples of that NAL unit,
based on the type. Other inserted bytes are treated
as a new all-clear subsample.
3) Merge those subsamples if possible.
- This addresses #237.
Change-Id: I2cab47cd00d90e29ec52b90d4fde057c632193ac
Moved all the timestamp parsing code into its own class with its
own unit tests. This is to make testing easier.
Change-Id: I624472baba51dfa1254a9f4bae55ebb79e310855
The HLS manifests output by the packager did not have the RESOLUTION
attribute on EXT-X-STREAM-INF tags. This change adds the resolution
tag when resolution values are present.
Close#235
Change-Id: I15ca6de47cb34793cf6a940123d593261627baa4
Shared libpackager can be built by setting libpackager_type to
shared_library, e.g.
GYP_DEFINES='libpackager_type=shared_library' gclient runhooks
ninja -C out/Debug
will generate libpackager.so in out/Debug/lib directory.
Here is a few other changes to make shared_library builds and
tests pass:
- Add several test parameters to packager.h, which is needed for
testing.
- Create a protoc.gypi from build/protoc.gypi but depending on
protobuf_full_do_not_use instead of protobuf_lite, since we need
protobuf_full_do_not_use for text parsing and generation of media
info proto. Somehow shared_library build does not allow mixed use
of protobuf_full_do_not_use and protobuf_lite.
- Remove the use of LazyInstance in version/version.cc and use static
variable directly. This is because LazyInstance needs AtExitManager
which may not be easy to setup when calling GetVersion.
- Allow skipping testPackageWvmInputWithoutStrippingParameterSetNalus
with flag --shared_library, which is needed as shared_library build
does not support --strip_parameter_set_nalus flag yet.
Fixes#227
Change-Id: Iff05a50baa28134faa7218664c96114cb9e70329
Added a text sample type that can be passed between media handlers.
This will allow text samples to safely be moved between media
handlers before converting to their final format.
Bug: 36138902
Change-Id: Ic4946f774a7d37c43066b9ea46596d5c5f3c05a8
frame_duration is not available when the VideoInfo is created, but
it will become available when a media segment arrives.
Change-Id: I2c24852fca4ff77c2b86ff78dbf0963ad0a0afa6
'availability_time_offset' is not an attribute in MPD specification,
but used to calculate availability_start_time to adjust segment
availability time. A similar effect can be achieved with standard
blessed suggested_presentation_delay flag.
If suggested_presentation_delay is not set, player is expected to
choose a suitable value.
Change-Id: I1d540bd4347b4f04b6cc5ec0778e1a5392009b09
Widevine license server added support for protection_schemes recently;
If CENC request includes protection_scheme in the CENC request, server
will return with a PSSH with protection_scheme filled in.
Change-Id: I6dcac498b5e039503d6ac0f6e057737f7c53efaf
This addresses playready broken with clear lead = 0.
clear lead != 0 is still broken with playready on Edge. We think it is
likely an Edge bug, which does not support multiple sample entry boxes,
thus does not support clear lead.
b/37913785
Change-Id: I7adb77a913dccf669153b03b31b4a1e1c98d1cb0
- Implemented according to v1.0 spec @ https://www.webmproject.org/vp9/mp4/
- v0 is no longer supported
Change-Id: I189c813d788400beda797eea7da943a83dfa7d79
- This change has the muxer listener side changes.
- Also changed SetContentProtectionFields() to take vector for
default_key_id so that MuxerListener subclasses don't need to convert
it to string.
Change-Id: I8832848a0c7e34b84e2b4e6baeba364861900ff1
- Added flag --mp4_include_pssh_in_stream, default to true. If it is
set to false, the encrypted mp4 stream will not include pssh.
- Align BytesOfProtectedData to multiple of 16 bytes for cenc.
- Set TrackHeader flag to kTrackEnabled | kTrackInMovie |
kTrackInPreview
- Move mvex to after trak, required by HLS
- Add cmfc/cmfs compatible brands except for avc3/hev1, where CMAF
requires single initialization switching set which is not supported.
- Set duration to 0 in tkhd, mdhd, mvhd.
Also updated major_brand and compatible brands:
- Set major_brand to isom (iso-bmff media file format) and made dash
a compatible brand
- Replaced compatible brand iso6 with iso8 since we use sthd for text
tracks
Fixes b/36278260
Change-Id: I3cc5dd5aa1621714d517fe02fe3841d19a1a07f6
- Also fix the misleading error if an invalid input is provided
The command line app now correctly reports that the file is not
found instead of stream not available.
Change-Id: I8cfccb62d7a50de57766666f126cf061e3df5ded
This is what webm_subsample_encryption flag actually does.
- Fixes the flag not working problem introduced by previous CLs.
- Also mark flag webm_subsample_encryption as deprecated.
Closes#220
Change-Id: I03ff843786572a91c01b8bd346a3ce50b129118f
Also added a few more command line flags for end to end test:
- no-remove_temp_files_after_test: do not remove test artifacts after
test
- encryption_key, encryption_iv: allow injecting encryption key/iv from
command line
Change-Id: I62084790e10fe6a385b90cb96d9515d8436b2a49
- Add EXT-X-MAP tag for init segment.
- Do not set output field on stream descriptor if not specified on
command line. If it's set (internally) then it gets copied to
MediaInfo that gets passed to the manifest generators.
b/36279481
Change-Id: I762c55b255699ec691817dc4806b0dee2f7504b8
- The flags were overwritten in a loop and therefore only stored the
last value of the flag.
- Change the fields into arrays so that the flags are not overwritten.
Change-Id: I59762d7c84bc3d81bf3b0b5e85ffe689260d970a
This is a fix for issue #216 where the Representation::SlideWindow() logic was
still active even though a static MPD was being asked to be generated (using
the option -generate_static_mpd). This could cause static streams longer than
1800 seconds to start playing at (end-position-for-stream - 1800 seconds).
This change is in compliance with the current usage documentation for the
shaka-packager, which suggests that -time_shift_buffer_depth only is relevant
for dynamic media presentations.
Added a flag --strip_parameter_set_nalus. When enabled, parameter
set NAL units, SPS/PPS for H264 and SPS/PPS/VPS for H265, are stripped
from frames when converting NAL byte stream (AnnexB stream) to NAL
unit stream, which generates avc1/hvc1; otherwise they are not
stripped, and avc3/hev1 is generated.
Parameter set NAL units should not be stripped if they are varying
in the frames otherwise the frames may fail to be decoded.
The flag is enabled by default as we don't usually see varying
SPS/PPS/VPS and it is more space efficient with them stripped.
Set --strip_parameter_set_nalus=false to disable the flag if there
are varying SPS/PPS/VPS in the frames. This addresses #206.
Change-Id: I34bde6f33069f9f77d51a510b39f58a0f0e141aa
The issue could lead to the MPD attribute mediaPresentationDuration being
wrongly generated for WebM streams with a duration longer than INT32_MAX.
The root-cause was that StreamInfo::set_duration() accepted an int instead of a
uint64_t. This seems like a pure typo, since StreamInfo already uses a uint64_t
internally for representing duration.
This CL also removes EncryptionConfig stream data type and merges it
into StreamInfo/SegmentInfo instead.
Change-Id: Idb70ce503e61d3c951225cc78b6b15c084e16dcd
- Disable subsample encryption for VP8 in ISO-BMFF
- Apply block alignment to all subsamples for VP9 in ISO-BMFF,
instead of just superframes.
Change-Id: I8dd31cc16e87abc4d538330eaff9acb0509497df
- luma_weight_l0_flag, luma_weight_l1_flag,
chroma_weight_l0_flag, chroma_weight_l1_flag were there but not set.
- The user should use the values in pred_weight_table_l0 and
pred_weight_table_l1 instead which are set.
Change-Id: Ic9c44fb113717346938a339faf074daa32d4c2d2
Also moved MediaHandler output validation to Initialize instead.
This CL also addresses #122 with consistent chunking.
Change-Id: I60c0da6d1b33421d7828bcb827d18899e71884ce
- WebVttMediaParser uses WebVttSampleConverter to generate non
overlapping media samples.
- The media samples contains ISO BMFF boxes.
- Add kCodecWebVtt to signal that the media is webvtt and
the samples will be in ISO BMFF boxes.
Change-Id: I639902cdba7b04af75428bc20622e26b8203cfb2
Before this, HLS output did not contain language information.
Now, media playlists are properly tagged with a language in the
master playlist.
b/36134267
Change-Id: I172e946dbedd096a44cb2f917b007cc004756228
- Also sets up the packaging and verify it works.
Some of the changes are temporary to get the integration going.
Change-Id: I0cf6c379d185e157808acabb9ef58ff93d4a39ae
The spec actually requires all NAL units to be escaped, so there
is no need to escape it again.
NAL byte stream is one demarcation method; NAL unit stream is another
demarcation method. Regardless of the demarcation method used, the
requirement for NAL unit is the same. See the last paragraph of
7.4.1 NAL unit semantics on the requirement on emulation prevention bytes.
Change-Id: Icc63fcc5cf965632e331f5af5f673164c7c1663a
CENCv3 recommends only encrypting video data in slice NALs. Slice
data partition NALs should not be encrypted.
In the code, differentiate is_vcl and is_video_slice. They are the
same for H265; for H264, vcl NALs include slice data partition NALs
but video_slice NALs do not.
Change-Id: I91f4bdd76d25f0eac50e39aed350ebce3f667121
- Logic for splitting up WebVTT cues into MP4 samples.
- For any cue intervals that overlap, a new sample must be created.
Change-Id: Icf7478f42d8c5790bf6f404d512c1251dd34c405
This handler is a multi-in multi-out handler. If more than one input is
provided, there should be one and only one video stream; also, all inputs
should come from the same thread and are synchronized.
There can be multiple chunking handler running in different threads or even
different processes, we use the "consistent chunking algorithm" to make sure
the chunks in different streams are aligned without explicit communcating
with each other - which is not efficient and often difficult.
Consistent Chunking Algorithm:
1. Find the consistent chunkable boundary
Let the timestamps for video frames be (t1, t2, t3, ...). Then a
consistent chunkable boundary is simply the first chunkable boundary after
(tk / N) != (tk-1 / N), where '/' denotes integer division, and N is the
intended chunk duration.
2. Chunk only at the consistent chunkable boundary
This algorithm will make sure the chunks from different video streams are
aligned if they have aligned GoPs. However, this algorithm will only work
for video streams. To be able to chunk non video streams at similar
positions as video streams, ChunkingHandler is designed to accept one video
input and multiple non video inputs, the non video inputs are chunked when
the video input is chunked. If the inputs are synchronized - which is true
if the inputs come from the same demuxer, the video and non video chunks
are aligned.
Change-Id: Id3bad51ab14f311efdb8713b6cd36d36cf9e4639
This will move ContentProtection element from Representation
to AdaptationSet.
Shaka Player already supports AdaptationSet switching
urn:mpeg:dash:adaptation-set-switching:2016;
ExoPlayer does not support it yet. Filed
https://github.com/google/ExoPlayer/issues/2431 to track the issue.
(ExoPlayer does not like having ContentProtection in Representation
anyway)
Closes b/34691105
Change-Id: I69d0a4d0e15a912a35c8b2686620419a28e4cc99
- Deprecated command line flags --profile and --single_segment.
'segment_template' in stream descriptors implies live profile
and non-single segment.
- Added flag --generate_static_mpd_for_live_profile to generate
static mpd for live profile; if not set, dynamic mpd will be
generated.
Close#142
Change-Id: I78879297ed118f0f246c4753a16ad125bd6b5e4f
- Added two new fields in MpdOptions: dash_profile and mpd_type
- Updated MpdBuilder to support LiveProfile with static mpd
- Command line arguments will be updated in the next CL
Issue #142
Change-Id: Ibd35e5c9e1b1ef98043392e3f04a0af4700135c1
- Add MSVS related patterns to gitignore.
- Removed encryption_modes.h from media_base.gyp. It doesn't exist.
Change-Id: I44bc86ff7e79daf6f7bc61c21a558937530d8e66
Current mechanism of using AdaptationSet @group is not spec compliant.
The spec compliant mechanism is to use supplemental descriptor with
schemeIdUri: urn:mpeg:dash:adaptation-set-switching:2016 as specified
in ISO/IEC 23009-1:2014/Amd.4:2016.
Fixes#156
Change-Id: I4d97648547a23315ba9c09dcadb14e18c99a45fc
- nalu_data points to the beginning of the nalu, instead of
beginning of the slice header which excluded the nalu
header.
- nalu_size is the size of the whole nalu.
- header_bit_size calculation is corrected. The size used to exclude
emulation prevention bytes.
Change-Id: Ic00f42caeddf7b4701f3948e6ef8a3537fd7f770
- If OnEncryptionStart() is called OnMediaStart(), someone should be
calling NotifyEncrytionStart().
Fixes#169
Change-Id: I597f317d2ddeb3091b7e9d238eb9695b4cc9c69d
Three options are supported right now:
- reuse=1|0
Allow or disallow reusing UDP sockets. Default 0.
- interface=a.b.c.d
Address of the interface over which to receive UDP multicast
streams.
- timeout=microseconds
Timeout in microseconds. Default to unlimited.
A UDP url should be of the form udp://ip:port[?options], here
is an example:
udp://224.1.2.30:88?reuse=1&interface=10.11.12.13&timeout=12345
Also deprecate --udp_interface_address flag in favor udp options.
Closes#133
Change-Id: I962d35bfedc1779d67ba20ed910207c66b7c1a15
1. Allow encryption pattern of 0:0, which is treated as 1:0;
2. Remove the special handling of pattern 1:0 in pattern cryptor
which may not always be correct;
3. Allow senc/saio/saiz boxes to be absent.
Change-Id: I372e61182ec577107e39cb601c3aed80616b036d
The original code creates temporary file in the current directory,
which may not always be writable.
Change-Id: Icc278dd5db6be6206ae29defbb7423bae39cc978
- Also import the version of the protobuf bundled in packager first,
this avoids importing the installed version of the protobuf, which
may not be compatible with this script.
- Print help if no argument is supplied.
Fixes#162
Change-Id: I1b5e87ba7fb51e81b0d4dd3791aaeb37ee0fd6ce
Cues used to be generated in the end of the file; if http range
request is not supported, clients have to download the whole
file to get to the cues.
This CL updated TwoPassSingleSegmentSegmenter to write cues
after writing webm header.
This CL also updates libwebm dependency to latest.
Closes#159
Change-Id: Ic73548e1b872e6b13a37627707e7d0ff3e556877
The original code accumulates sample durations in seconds (double)
and then generates new segment / cluster by comparing the accumulated
value with configured value.
There may be loss of precision when accumulating values in double.
For example, with a GOP of 96 frames and frame rate of 24 fps; the
accumulated frame duration for 96 frames is 3.999999999999, which is
very close to 4.0 but not 4.0. Problem would arise if segment
duration is set to 4. The created segments would have a duration of
8 seconds instead of 4 seconds.
The new code accumulates sample durations in uint64_t relative to
input time scale; the configured segment duration will be converted to
timescale for comparison. This avoids loss of precision.
Change-Id: I3ae24be82a7ce45f923a6f90fea495b8b6b2e7ef
Setting this flag will tag any matching tracks with kRoleMain.
The player will then know which tracks should be default when there
is not a language match.
Closes#155
Change-Id: I827304c49e345d07b1e76f7a46421b60f228f0ba
Language tags can have subtags, such as "por-BR". While the base tag
should be 3 characters, the entire tag can be longer. Rather than
parse out the base tag and check that it is size 3 without the subtag,
we can just trust the ISO tag converter to do the right thing.
Change-Id: I2a186b5c8db0f373ee82ef68245ecc33cb068581
Some subtitle files use .webvtt instead of .vtt, probably because
ffmpeg uses -f webvtt when converting from some other format.
Change-Id: If88e8d2b90e5dea6751409568d5191e923dec4aa
- Also regenerated test content to insert an iframe every one
second: ffmpeg -i source.webm -auto-alt-ref 1 -g 30 out.webm
This makes sure the content is actually encrypted with one
second clear lead in end to end test.
Change-Id: I488143c148e2d6c45ba1586f6d0d835dc46db86e
- Add decrypt_config in media sample and stream.
- Update subsamples when converting NAL unit to bytestream.
Change-Id: I7b8975a453f81b22cf74bee3c9a58b7e458cbaae
1. Replace STLDeleter with unique_ptr in container, which is
supported in C++11
2. Replace string_as_array with &string[0] which is guaranteed
to work in C++11
Change-Id: I7f39c0e51fc8a3fcbb41313094a0ca6b33db7bf3
The current behavior of logging to a file in the same directory
as the binary will break if the binary does not have write access
to that directory.
Fixes Issue #139
Change-Id: I11adfaec676fc9bbef2a5caa3261889d1fba3b88
In H264, there may be multiple consecutive video slice NAL units
in the same frame. The original code assigns a new access unit
for every video slice NAL unit, which is incorrect.
Fixes#134.
Change-Id: I4d44271df48cb08867ddd02f7494fb3573af3356
Mimic iso-bmff behavior: either all the samples in a segment are encrypted
or all the samples are clear.
Change-Id: I03bdbbf5a4b690f4d87c4dceb0f8155e6fae941e
The right way to detect the presence of a keyframe in a BlockGroup
is to look for the absence of the ReferenceBlock element [1].
Closes b/30433206
[1] https://matroska.org/technical/specs/index.html#ReferenceBlock
Change-Id: I2b3c8704cbabcd5cbee38448e5528425865561a4
Aaron Vaage
KongQun Yang
Haoming Chen
KongQun Yang
fatpelt
Michael Stillwell
Haoming Chen
Kamesh Devarakonda
l-law
Joey Parrish
Widevine Buildbot
Ivan L. Isaev
David Cavar
Yohann Connell
Rintaro Kuroiwa
sylt
Zajcev Evgeny
sylt
Chun-da Chen
Kyle Alexander
sammirata
Thomas Inskip