Text Samples with no payload should be ignored, so this adds a
test to check that samples with no payload get treated the
same as a gap.
As long as this case is true, using gaps in our other tests should
functionally be the same as using samples with no payload.
Change-Id: Ic16b240c43eda2514b537a2d938d4135638adc4e
Before we used the sample payload for each text sample as we were
focusing on the times rather than the contents.
As we look to add tests that rely on specific sample payloads, we
need to change the tests to explicitly set the payload for each
sample.
Change-Id: I24174686f46535cf6c2d59a18308101a3bb51c87
EPT (earliest presentation time) may be adjusted not to be lower than
the decoding timestamp (dts), but the adjustment should only be done
on the first file when there is one file per Representation per Period.
The second file and onwards should not be adjusted otherwise a GAP
would be created.
Closes#384
Closes b/78517422
Change-Id: I56771ad8fbbe6a87b832ec58854cfbf37d5f1817
In our text to mp4 tests, we were only checking if the times on
the samples lined-up with what we were expecting.
We want to check that text sample contents (ids, settings, and
payloads) were correctly merged into a single media sample. To
verify this, we now check if the sample ids appear in the
media sample.
Change-Id: Ica1a85a14e7b116275e3571332b2e90d7bc44c45
In our text to mp4 tests, we used the same sample id for each sample,
this changes it so that each sample (within a single test) has a
unique id.
This is done in preparation to look for the ids in the created
media samples.
Change-Id: I3215a6f09279af8f40e1ce8a959e0a522a811173
The previous text to mp4 webvtt pipeline was incomplete. It
did not insert ad cues and it could only insert a segment
after a sample ended.
Now the pipeline supports ad cue insert and segment insertion
mid text sample. This required the pipeline to use the text
chunker (to split samples and insert segments) and required
a major overhaul of the text to mp4 converter.
Before the converter came before the chunker. This meant that
the converter only expected to see stream info and text samples.
Moving the converter after the cue aligner and chunker means
that the convert had to be aware of segments and cues.
The general approach is the same, however the converter will
convert the samples per-segment as the chunker will introduce
duplicate samples if a sample spans across segments.
Closes#362Closes#382
Change-Id: I0f54a40524c36a602ad3804a0da26e80851c92fd
Allow the output file to contain template identifiers like $Number$,
$Time$ etc. Unlike the actual template used in SegmentTemplate, the
identifiers in output will be populated before pushing to the DASH
manifest.
Issue: #384
Change-Id: Ife1caadb6fccd32167fa1bc83fe2afcb2d2ad087
This is needed to support one file per representation per period where
there will be multiple content files generated.
Issue: #384
Change-Id: Ib7af750edf864d99075b8da4f3640217a5a94302
In the text sample box (for mp4) there was a value called
"data_reference_index" that was never initialized. This meant
that it took on various values can caused different results
between runs.
Change-Id: I4b18ac97ec4700f6e651b14898ef250713a4253c
Renamed all the files called "webvtt_output_handler*" to
"webvtt_text_output_handler*" to better reflect the class name
in them.
Change-Id: I977bab362076974a124f263bcefff716ed8b6a0f
The SetUpAndInitialize function returns a status. We were not
asserting that it return an OK status. This change adds the
missing ASSERT_OK calls.
Change-Id: I044f60c0450d46fc0f6495319b1ed7ef8ab6e794
We don't want to allow any handler to be copyable or assigned-over
so this change enforces that for the webvtt output handler.
Change-Id: Ie0d59d6dbfb7a5e00bb4dd1422cd696d1a2d6072
Before, the webvtt output handler was written so that it could
share code between a segmented and non-segmented handler. As
we are not worried about that right now, this change simplifies
the handler to just be about segmented output.
Change-Id: I29dbc4e3a4ffbeb7ea10e23db489ee74b398a6c4
Instead of failing immediately, ignore unsupported audio codec when
parsing the source file, as there may be more than one stream in the
source file. This allows the supported streams to be packaged.
Closes#395.
Change-Id: I01005a93a19012c19065251647c9b06dd25c673a
The Cue class was from a previous WebVTT implementation and
is not used in the current implementation. It was missed when the
other classes were removed. This change removes it.
Change-Id: I661ab3fcd80b5e5ef98b5213746b341a4028d1a1
- Added a new --enable_entitlement_license flag, which sets
'enable_entitlement_license' in Widevine CommonEncryptionRequest;
- Support 'boxes' in Widevine CommonEncryptionResponse.
b/78171767
Change-Id: Id399fc7fcb2948c571e12c8af7687cfcfcef41fe
When originally implementing the webvtt parser, there was a
misunderstanding in what the BOM was suppose to be
(https://en.wikipedia.org/wiki/Byte_order_mark). This corrects the
misunderstanding.
Close#397
Change-Id: I250d392db228e5e9b86684614b57adc5d8a4e5fe
Problem : Text samples have variable length and therefore act
more like continuous samples whereas audio and video
act more like discrete samples. Since we use sample
start time, a cue event could be inserted after the
start time of the last text sample and never get
inserted as there are no more samples.
Change : After all streams have requested flushing, we make sure
to collect all remaining cue events from the sync point
queue and insert them into each stream.
Issue #362
Change-Id: Id8f136f7ef53531f7a7f412613eac352324e0130
Uses protobuf JSON util instead.
packager/base/json_writer comes from Chromium base. We are going to
replace it with abseil, which does not have a JSON library.
The code is much more cleaner now.
This is unfortunately, at the expense of increased output binary size.
packager binary increases by another 100KB.
Change-Id: I83a9217a484cad3c41147ad9a75311384347c49c
Use protobuf utilities instead.
packager/base/json_writer comes from Chromium base. We are going
to switch to abseil which does not have a JSON library.
This is unfortunately, at the expense of increased output binary size.
packager binary increases by about 300KB due to:
- Protos cannot be compiled with LITE_RUNTIME any more.
- Additional protobuf library needed to convert between JSON and proto.
Change-Id: I45a497376925b42d147ffcaabcfc2fa4dbdeacc1
In the cue alignment handler, instead of storing just one cue, store
a full queue. This will make it easier to handle text streams that
end before audio and text.
Change-Id: Ida97008fa015639350261bd3f76f4cb901747c66
In the cue aligner, instead of storing the cue event, store a
stream data so that we don't need to know the stream index when
sending the cue event downstream.
Change-Id: Ice27da021fad2872e2a23975b959630a9d43b736
This is in preparation of supporting entitlement license API, where
common encryption server may return concatenated PSSHs directly.
Refactored ProtectionSystemSpecificInfo into a struct containing
concatenated PSSHs. This will make it easier to pass PSSHs around.
Also, most of the time, users of ProtectionSystemSpecificInfo do
not care what is in PSSH; so moved PSSH box parsing and building out
of ProtectionSystemSpecificInfo.
b/78171767
Change-Id: I1c4d5e7e23efd2f7d4b2b9704378323112e47f00
To make it easier to understand what a video stream and a non
video streams is doing in the cue aligner, each stream type is
given their own functions.
Change-Id: I8b8ca403721bcb06ca3056004420902667a30f6c
Use a common hint for all stream states as the hint is always
updated when we get a new cue event. Cue events are only gotten
when be pass the hint, so there should only need to be one hint.
Change-Id: I0838110b9b10325a9e99f8fca0b11f0a6b48f8a0
To allow generating Widevine / Playready PSSHs if the corresponding
PSSH generator is specified.
Note that Key Rotation with RawKeySource is designed to be used for
testing only.
Change-Id: Icaf9e74955c082a7b000bd6a08f4561f2e01a2e2
Problem: Sending samples to the cue alignmenet handler did
not reflect what was more likely to happen. In our
tests we would send all the samples for one stream
then all the samples for another stream. This created
some special cases that would either not happen in
reality or miss cases that would likely happen in
reality.
Changes: Changes all tests to dispatch samples in an interlaced
pattern that better reflects muxed content.
Change-Id: I985092154b62eb12d95499663d195ca6c103bc19
In H265Parser::ParseSliceHeader, the parser does not handle
byte_alignment() from the spec. byte_alignment() reportedly contains
at least one bit, which is not handled right now.
See Section 7.3.2.12 Rec. ITU-T H.265 v3 (04/2015).
Also added a few size sanity checks in H265Parser to make sure the
code does not crash if an invalid input is provided.
Fixes#383.
Change-Id: I33b31396058fc5ba67a0fc119be5fe56ec9443b0
Packager uses ThreadedIO to write media segments and manifest /
playlists. There was a possibility that media segments write being
delayed and scheduled after updating manifest / playlists.
This CL fixes the race condition.
Also added a note on how segments can be synced to cloud storage to
avoid the race condition during file sync.
Also added a live WebM test.
Fixes#386.
Change-Id: Icf9c38cdec715fa3dc2836eab1511131e129fe41
Fixes#387.
Note that the output will not play in Chrome until the Chrome bug
https://crbug.com/837832 is fixed.
Change-Id: Ic3e917161cedfa773c0a18b4a5d7b1254c6f1313
Problem: The time scale for text was being set to zero in our tests
because it was never needed.
Change: This changes it to use MS as that is what's most common and
requires the least amount of changes.
Change-Id: Ia046ac1994b4cede079d2f801275c7f058d5bdd3
- Allow including Widevine and Common SystemID PSSH boxes
for PlayReadyKeySource.
- --playready_key_id and --playready_key flags are deprecated.
- --enable_raw_key_encryption already supports playready PSSH generation.
Addresses issue #245
Change-Id: I072d4f43a3239875959e4c5b1eb6854415d7367e
To ensure that we can parse content with style and region blocks,
this change updates the parser to skip those blocks so that we
can still parse the cues from a file.
Full style and region support will be added later this year.
Issue #380
Change-Id: I11b8fd862a108c27a5c67b15d4703532b44a1214
Removed the logic in MuxerListener to estimate bandwidth from file
size and duration, since it is not compliant to the spec.
MpdBuilder will estimate bandwidth from segment size and duration
if bandwidth is not specified in MediaInfo.
Here is the statement from DASH spec (23009-1:2014):
Consider a hypothetical constant bitrate channel of
bandwidth with the value of this attribute in bits per second
(bps). Then, if the Representation is continuously delivered
at this bitrate, starting at any SAP that is indicated either by
@startwithsap or by any Segment Index box, a client can
be assured of having enough data for continuous playout
providing playout begins after @minbuffertime *
@bandwidth bits have been received (i.e. at time
@minbuffertime after the first bit is received).
For dependent Representations this value specifies the
bandwidth according to the above definition for the
aggregation of this Representation and all complementary
Representations.
Fixes#376.
Change-Id: I0fddce39e709d0cded0a4c9ae59adbbcc97ec5ea
And for HlsNotifier and SimpleHlsNotifier as well.
This will make it easier to add preserve_segments_outside_live_window
param in a later CL.
Change-Id: I86d464fe247e04574158a0a76e39d8a122960ae4
Content-Type for Widevine key request was incorrectly set to text/xml,
but it should be application/json.
Also added VLOGS for curl calls.
Fixes#372.
Change-Id: I4230795a582112c6d9c12883b5e61481b63284aa
Instead, the actual earliest presentation time is used except for
the first segment if there is an offset between presentation time
(pts) and decoding time (dts).
Chrome (as of v66) reports dts instead of pts in buffered ranges in
MSE API. To avoid breaking Chrome, the earliest_presentation_time
of the first segment is set to its dts as Chrome does not like negative
values for
adjusted dts = dts + Period@start (0 for the first period)
- presentationTimeOffset (earliest_presentation_time).
Fixes#303.
Change-Id: I5ca80e05d5570961400499436f2bcc01f06e69e0
The WebVtt Output Handler did not recognize cue events. This change
allows the handler to accept the events and tell muxer listener
about them.
Issue #362
Change-Id: I7c3318b72e539adc19af587c8e213fdb0af8290b
Created a media handler to come after parsers that will handle filling
in gaps between text samples. The padder takes a min duration, and if
the samples do not cover the min duration when flushed, one last empty
sample will be injected so that the samples will go up to the min duration.
Change-Id: I88605059664d09279676edac418ff3d4990d7556
Updated TextChunker to handle incoming CueEvents. Connecting the
text chunker with the cue alignment handler will happen in a later
CL.
Issue: #362
Change-Id: Ib1fa9f457cf4ec0ce413dadcfa7eed5895ecd628
Move the webvtt segmenter to the chunking directory so that it
can be converted to a general purpose text chunker.
Change-Id: I9ecd7ee39cb73070dab07b64f65ef24af1404813
Now that we have the end-to-end tests, we no longer need the webvtt pipeline
tests to verify that it is working.
Change-Id: I4ebec34e66eda67c40999d8802b447e2551e1fa6
SyncPointQueue manages all cue points and returns aligned cue
points to the callers (CueAlignmentHandlers).
CueAlignmentHandler is responsible for aligning cues from different
streams. It uses SyncPointQueue internally to align / synchronize the
cue points.
Issue: #355
Change-Id: I281fecb46a3ca7172d71e7495bdd07b8efdeb283
This is called when reaching end of the file of the media. The duration
of the media is updated.
Fixes#340.
Change-Id: I446f2d341b02125d4a7d8c958bda269b5403cb9c
We have an assert that ensures that the end time is greater than
the start time for any cue. However we never checked that cues
had a non-zero duration when parsing them.
We will throw away cues with a duration of zero (and print a
warning message) as they are not spec compliant.
Closes: #335
Change-Id: I404e8f3a5a8d43eff75a2554db3e38e8d340f421
In the video captured by Android's default camera app, meta box is written as
as Box instead of FullBox specified in the spec.
Closes#319.
Change-Id: I526492fdd505d5929c5161cb1ed1503b724de7e9
This change has the hls master playlist add the text codec string
to the list of codecs in a variant.
Bug: 72942756
Change-Id: Ib25bb2064a291d10d7b1d261a4307991df62220c
Created end-to-end tests for the segmented webvtt text in HLS. The
text stream is longer than both audio and video, so there are more
text segments than video/audio.
Change-Id: Ib860ccd3f2ac0048983fdeebe3847a0b9dcbc160
When converting from NAL unit stream to byte stream.
The packager should not assume the parameter sets in the sample is the
same as the parameter sets in sample entry (decoder configuration).
Fixes#327.
Change-Id: I7e84d28a296f4b33db0523cca5eabd62f623e852
Looks like Safari does not like v0 tenc box.
- Use v1 tenc box for cbcs and cens protection_scheme as required by
CENCv3 spec.
- Set crypt_byte_block and skip_byte_block to 0 for full sample
encryption cbcs and cens.
Fixes#326
Change-Id: I5581cd856fffc4ff104d950f3ca19b9337d57a78
The old vtt sample data has the header as "WEBVTT FILE" which does
not reflect what the spec says it should be.
This changes it to "WEBVTT" as described in the WebVTT spec.
Change-Id: Ib54396a8b937501a835dafe966bf05b95b0b22c4
When a gap is found in the text stream, the WebVtt to Mp4 converter will
now output the special empty vtt cue.
Change-Id: I8be88c6b7589aa120a2215e1e4b8e98031fe326d
Closes: #324
- Add empty lines between different types of renditions to improve
readability.
- Group variants with the same audio/text group together, as it is
where the Adaptation occurs.
- Write master playlist after writing media playlists. This makes
more sense and it is also necessary to have the bandwidth of
the last iframe playist segment correctly computed.
- For fMP4, I-Frame segment must include the 'moof' header.
- Fix a problem that hls_iframe_playlist_name is not passed to
MuxerListenerFactory.
Issue: #287
Change-Id: Icf37c5de1dc29f85ae3f419cbc3264d04ca491a4
Adding all the code needed to allow the webvtt to mp4 converter to
send empty vtt cues. This change does everything except writing the
mp4 box.
Bug: #324
Change-Id: I16188e6357632b2ed06f7e9bab7844f093266696
Instead of always tracking segments with an index, this change makes a struct
that will act as the segment and track which segments are in it. Each
segment will store all the samples in the order they were given, it will
avoid any sorting.
Closes: 72867775
Change-Id: Ic5829161510fe8f3320d960c3bc4a276c26ff3be
Create WebVtt test that shows that the current implementation of the
webvtt segmenter does not respect the input order of cues.
Bug: 72867775
Change-Id: I811b3a93c10650e0cf9290c9c0c1680f562deb30
If no hls group name is given, we would default to "audio" but as
we are working to support text, this won't make sense to see
GROUP="audio" on a text stream.
Instead default to "default-audio-group" for audio streams. A specific
text default will be added later.
Bug: #205
Change-Id: Iefc8bfd35708286619d0004348294d98f2c38482
According to the HLS+WebVTT spec, if there is no text in a segment
a webvtt file with no cues can be added to the manifest. By outputting
empty segments it allows the accumulated duration in the Master Playlist
to better represent the duration of the text stream.
Spec Reference: //tools.ietf.org/html/draft-pantos-http-live-streaming-23
Section 3.5. WebVTT
Bug: #205
Change-Id: I5de01200fd9fa99c57949c773e8ee926b0f6ba8a
- Removed SetError, Swap, Matches functions, which are not used
- Added moveable version of Update function
- Added VLOG(1) warning in Status for non-ok status
- Replaced OS_WIN with _WIN32 as OS_WIN may not have been defined.
Change-Id: Ib6b7aab6e6fee270937b150f1e4bf993e914a568
The IV was incorrectly updated across samples.
Created a new cryptor SampleAesEc3Cryptor specially for SAMPLE-AES
EC3 encryption / decryption. The new cryptor uses constant-iv, and
makes sure the IV is reset to the initial value at the beginning
of each audio frame and chained across syncframes within the the
audio frame.
Also added E-AC3 end to end test.
Fixes#279
Change-Id: I0aa60c17836daeef5ba433a05e5ff0906191d9ac
Instead of using next segment start time, as CueEvent time may not
align with segment start time exactly.
Also remove the incorrect DCHECK in ChunkingHandler when processing
kScte35Event.
Change-Id: I4987740c99c8d0d25c9b99bddc5e557e45d308e0
When transmuxing from TS to MP4 if there is emulation prevention
bytes in general_profile_tier_level_data.
Fixes#312
Change-Id: I48857046c1ea4bed4f455d03d060551e3ef4bec8
Moved muxer listener creation into a factory so that it can be
initialized once and then the factory only needs to be passed
around rather than all the parameters.
Change-Id: Ibf7df66c08debddbe6f6ff8995e7910b9ad17f3f
Use a mock muxer listener so that we can verify that the webvtt
output handlers will write to a manifest correctly.
Change-Id: I0294a998bfaf06a6d8f7d4c287fb014839b38f73
Connected the WebVtt Pipeline together to test that the parser,
segmenter, and output all work together as expected.
Change-Id: I07138f7b5b1318f84c27c5b607d8df207c57ddb3
Changed muxer listener to use "default" instead of {}
when defining its constructor and destructor in its
header file.
Change-Id: I3c80e808aa624293c3d7720ac6a47b470a663312
- Update curl to 7.57.0
- Roll clang, which is needed due to MacOS / XCode update
- Fixes and suppress compilation errors due to clang update
Fixes#285
Change-Id: Ibac3288c641861605c3c0500d34d27373e6eecfe
This change introduces handlers to output WebVtt text files. There is
only one output but there is a common base to support others.
WebVttOutputHandler which handles all communication with other handlers
and WebVttSegmentedOutputHandler is responsible for listening for events
and choosing when and where to write cues and headers.
Bug: 36138902
Change-Id: I2b13a94262554398e66fee8cf024aa21041ddbab
Instead of having multiple char readers, one for strings and
one for files, just have one for files and use memory files
when testing.
Change-Id: Id1a2230046ba540ddf69ca10edb3edc74d2419b6
To better align with the Chunking Handler, the Text Segmenter
now outputs the SegmentInfo at the end of the segment rather
than the start.
Change-Id: If69ab951947d00779b4b63a52c4b6662bbdc4c0d
Implemented a MediaHandler that takes text samples and creates
media samples. The data in each media sample is the MP4 box for
non-overlapping cues.
As per WebVtt in Mp4, all cues must be non-overlapping. This handler
takes care of grouping and dividing cues.
Bug: 36138902
Change-Id: I0c1d27964180c14a22cb200591f70e46e04a651f
This change creates the webvtt segmenter which will be used for
segmented text webvtt for HLS. It takes a stream of text samples
and injects segment info messages based on the segment duration.
It is possible for samples to extend between segments, if so the
sample will appear twice (once in each segment).
Change-Id: Iae0134ee61cf269948026086520b6d3f8ce3785b
Took the WebVTT Media Parser and created the WebVTT Parser
that will take in a file and output a stream of cues that
will later be passed to another Media Handler that takes in
cues and chunks them.
Bug: 36138902
Change-Id: Ic77813fe19678e85d500269e69f46917510ab7ec
Seeing some failures on some platforms when compiled with clang
disabled:
GYP_DEFINES="clang=0" gclient runhooks
Several changes to make it work:
1. Mark packager code with packager_code=1 in GYP definitions.
2. Disable a few checks in non-packager code, which we do not have
direct control: dangling-else, deprecated-declarations,
unused-function
3. Fix the relevant errors in packager code.
4. Revert HAVE_STROPTS_H in curl config which is not available in
all linux distributions.
Fixes#286Fixes#293
Change-Id: I729b41f99403c5ad9487c6cc4a7dc06f6323cef8
1. Expect the time elapsed to be greater than kTimeout instead of
approximately equal to kTimeout if there is a "wait";
2. Expect the time elapsed to be smaller than kTimeout instead of
approximately equal to 0 if there is no "wait".
Also rename a variable in packager.cc to better reflect what it is.
Change-Id: I67975a6263b8dbc1124b78feae0f8e0d112bda50
The error is logged only once to avoid log spamming.
Added definitions for the unsupported stream types for easy look up.
Change-Id: I097e2f05759bc84ef03f264cfabd2fb20da7c711
This patch also fixes a bug which was introduced in
https://widevine-internal-review.googlesource.com/c/packager/+/38040
where it was inconsistently assumed that AdCueGenerator would be MIMO
while connecting with other handlers and at the same time it was assumed
SISO in the AdCueGenerator class. Now we assume SISO everywhere.
Change-Id: Icd8c40b5ccfe0d98f47f09a60ea1635f74dceef9
The spec allows having more than one 'mdat' boxes even if it is not
used.
This is happening on some mp4 files in the wild:
http://www.sample-videos.com/.
Fixes#298.
Change-Id: I729cc94bee095560b5c4b3ee8511323f25f7ad5a
Implemented E-AC3 MPEG-2 Stream Encryption Format for HTTP Live
Streaming specified in https://goo.gl/1sgcwY
Issue #279
Change-Id: I36c1a05e3d0529ff810eaf52bdca45414baa93eb
Audio samples per frame for AC3 was not specified correctly earlier.
Also the number of channels is not correct if LFE channel is on.
Issue #165
Change-Id: Ibf20aa4c7aec43c07ec7cd394d631c537cb387dd
Implemented MPEG-2 Stream Encryption Format for HTTP Live Streaming
specified in https://goo.gl/N7Tvqi.
This change also moved ProgramMapTableWriter creation from TsWriter
to TsSegment.
Issue #165
Change-Id: Ia89dd16a5e6405706dd3d85ec6b6de580f7b13a7
The keys can be specified in --keys option, with the form of
label=<label>:key_id=<32-digit hex string>:key=<32-digit hex string>,label=...
There can be multiple "label=..." block. The DRM label can be one
of "AUDIO, SD, HD, UHD1, UHD2" or a custom label.
Mark --key and --key_id as deprecated. We can achieve the same result
with --keys=label=:key_id=<key_id>:key=<key>.
Also add a new optional field in stream descriptor: drm_label, which
is used to overwrite the internally generated DRM label for the stream.
If not provided, the DRM label is generated automatically based on
audio/video information, e.g. resolution.
Code changes:
- Merged RawKeyEncryptionParams and RawKeyDecryptionParams into
RawKeyParams.
- Make FixedKeySource accepts RawKeyParams as input.
Change-Id: Ic8c2f071cc71188e13f14bc6396fc2b3ffa5cac6
Use std::shared_ptr<const uint8_t> with a custom deleter to
represent MediaSample::data_ instead of std::vector<uint8_t>.
MediaSample::data_ can be shared by multiple MediaSamples and it is
immutable. A new data instance must be created if the clients want to
modify the underlying data. The new data instance can be transferred
to MediaSample using provided MediaSample::TransferData function.
This avoids unnecessary data copying.
Change-Id: Ib59785a9e19d0abb3283179b12eb6779ee922f79
Took the test structure for trick play and made a common test
structure that can be used for new tests. The next tests to
use this structure will be the new WebVtt pipeline.
Change-Id: I5faca306b8a2bd16b9f945d1ff5c336aed82bc35
This change create some matchers and text functions that
will be used by the upcoming webvtt work.
Change-Id: I2d7931d1bdabd761f74e8aee7524d5ecfb7cfdc4
Before the trick play handler would have one input and multiple
outputs. The normal media handler API for adding handlers had to
be ignored when setting-up the trick play handler.
This changes the trick play handler to have one input and one output.
It uses the standard AddHandler method calls. When initialized, the
trick play factor must be provided.
This included a run of 'clang-format' over all edited files.
Change-Id: I7b3cdf0a2472e2f89ab194867c4b984e26f18f24
To allow more tests to use the MediaHandlerTestBase and get access to the
helpful creation methods, this change moves the use of FakeMediaHandler
and setting up the graph to a sub class.
Change-Id: I90dd151e3c96d8fbe4bd02a1d6b11e66a279d95b
Created media handlers that make testing a handler easier by providing
methods to send messages from upstream and check messages downstream.
Change-Id: I7b3ba3a51bcf0d73bcaacd46b2dcbc16f87d8694
In prep for changes to Trick Play, we want to make all messages
copy on write so that if the same message is sent to multiple
handlers, it is not possible for one handler to change the data
another handler is using.
Change-Id: I554166ca11c532412e4dfced5603972ca24dc2bb
Previously packaging completes successfully without any error
or warning.
With the fix, an error will be reported if write fails. It may
appear as "Cannot close file error" as we use threaded IO, which
could delay the error reporting until Close() call, so the user
of the File API needs to make sure Close() returns successfully.
Also fixed a deadlock in threaded_io_file if internal_file->Write
fails.
Fixes#160
Change-Id: I17f945150fb4021d2dcdbe784e557673f53ca583
To ensure that the style data is formatted correctly, changing the
set_style method to AppendStyle so that joining values will be
done in controlled setting.
Change-Id: Ia88e2d260b11339e6777ff018813e8aeb802a501
There are multiple functions we use to verify input from the user
and must of them would return a boolean expect for the top level
function which would return a Status. Each function would log a
message but to the user the error was not clear. This change makes
each verify function return a status so that the actual problem
will be surfaced easier.
Change-Id: I12ab43f8ca3a4d379b4309336644a70eb8cbbbe0
Implemented the other end of the webvtt timestamp parsing as it will
be needed when we write out WebVtt files. Also changed the name of
the parse function to be more inline with the writing function.
Change-Id: I1f36ddbbf80028732b4cb1b15e871dec17767f63
Created a handler called OriginHandler that can be used by the Job class
(previously called RemuxJob). Origin handlers represent the start (or
origin) of a pipeline (chain of handlers).
Change-Id: Ibd748ae0a932b6e0ebb879ea292fcb83c548214b
Support generation of fairplay key system tag: "com.apple.streamingkeydelivery" when --pssh
includes fairplay key system id:
// Unofficial fairplay system id extracted from
// https://forums.developer.apple.com/thread/6185.
const uint8_t kFairplaySystemId[] = {0x29, 0x70, 0x1F, 0xE4, 0x3C, 0xC7,
0x4A, 0x34, 0x8C, 0x5B, 0xAE, 0x90,
0xC7, 0x43, 0x9A, 0x47};
Closes#258
Derive file size from media ranges instead.
Also fix subsegment range reporting for WebM (internal variable,
no output affected).
Change-Id: I5f8152dff4c2cd5fbae5550992b86a669e278f7b
- Use byte range format if segment_template is not set in MediaInfo.
- Change HlsNotifier::NotifyNewSegment() to take start byte offset.
- Change HlsNotifyMuxerListener to cache the segment information if
MuxerOptions::segment_template is set.
Change-Id: Ida1b8b9198acc5c43e3a5d9a641c78c81bc9a6ac
- Changed OnMediaEnd() to take (sub)segment ranges.
- Define a structure to pass the ranges.
- This requires muxers to "cache" the segment ranges but in most cases,
they already do it, e.g. 'sidx' for mp4.
Change-Id: I16b974c1f0f54ca658cc6dbe605efff84a3f52eb
In the original manifest updating process, the file was truncated first
before was written with new contents. There is a small chance that
the web server may read back empty file or incomplete file.
The new code makes the update operation atomic (by writing to a temporary
file first then replace the old file with the temporary file).
Fixes#186
Change-Id: I2fd564cb12b922b032c0e9f70d2132a5b12ff098
- Remove the TS key rotation not supported check as there is nothing
to be done for key rotation in TS for SAMPLE-AES.
- Fix IV updated problem in new segments even if crypto period does
not change.
- Avoid duplicate EXT-X-KEY tags if it does not change.
- Make EXT-X-DISCONTINUITY-SEQUENCE match with number of removed
EXT-X-DISCONTINUITY.
- Added end to end test for HLS with key rotation.
Change-Id: I73cb82e9f5575fcdf63ee643228efe78e6766302
- This fixes the issue when one NAL unit has multiple
subsamples, which is allowed in spec and could happen
when the clear_bytes exceeds 2^16 bytes.
- The new algorithm updates the subsample entries in
following steps:
1) When NaluReader parses a new NAL unit, the
function splits subsamples and align them with the
NAL unit. It also finds the range of subsamples
for that NAL unit.
2) Drop or update subsamples of that NAL unit,
based on the type. Other inserted bytes are treated
as a new all-clear subsample.
3) Merge those subsamples if possible.
- This addresses #237.
Change-Id: I2cab47cd00d90e29ec52b90d4fde057c632193ac
Moved all the timestamp parsing code into its own class with its
own unit tests. This is to make testing easier.
Change-Id: I624472baba51dfa1254a9f4bae55ebb79e310855
Shared libpackager can be built by setting libpackager_type to
shared_library, e.g.
GYP_DEFINES='libpackager_type=shared_library' gclient runhooks
ninja -C out/Debug
will generate libpackager.so in out/Debug/lib directory.
Here is a few other changes to make shared_library builds and
tests pass:
- Add several test parameters to packager.h, which is needed for
testing.
- Create a protoc.gypi from build/protoc.gypi but depending on
protobuf_full_do_not_use instead of protobuf_lite, since we need
protobuf_full_do_not_use for text parsing and generation of media
info proto. Somehow shared_library build does not allow mixed use
of protobuf_full_do_not_use and protobuf_lite.
- Remove the use of LazyInstance in version/version.cc and use static
variable directly. This is because LazyInstance needs AtExitManager
which may not be easy to setup when calling GetVersion.
- Allow skipping testPackageWvmInputWithoutStrippingParameterSetNalus
with flag --shared_library, which is needed as shared_library build
does not support --strip_parameter_set_nalus flag yet.
Fixes#227
Change-Id: Iff05a50baa28134faa7218664c96114cb9e70329
Added a text sample type that can be passed between media handlers.
This will allow text samples to safely be moved between media
handlers before converting to their final format.
Bug: 36138902
Change-Id: Ic4946f774a7d37c43066b9ea46596d5c5f3c05a8
Widevine license server added support for protection_schemes recently;
If CENC request includes protection_scheme in the CENC request, server
will return with a PSSH with protection_scheme filled in.
Change-Id: I6dcac498b5e039503d6ac0f6e057737f7c53efaf
This addresses playready broken with clear lead = 0.
clear lead != 0 is still broken with playready on Edge. We think it is
likely an Edge bug, which does not support multiple sample entry boxes,
thus does not support clear lead.
b/37913785
Change-Id: I7adb77a913dccf669153b03b31b4a1e1c98d1cb0
- Implemented according to v1.0 spec @ https://www.webmproject.org/vp9/mp4/
- v0 is no longer supported
Change-Id: I189c813d788400beda797eea7da943a83dfa7d79
- This change has the muxer listener side changes.
- Also changed SetContentProtectionFields() to take vector for
default_key_id so that MuxerListener subclasses don't need to convert
it to string.
Change-Id: I8832848a0c7e34b84e2b4e6baeba364861900ff1
- Added flag --mp4_include_pssh_in_stream, default to true. If it is
set to false, the encrypted mp4 stream will not include pssh.
- Align BytesOfProtectedData to multiple of 16 bytes for cenc.
- Set TrackHeader flag to kTrackEnabled | kTrackInMovie |
kTrackInPreview
- Move mvex to after trak, required by HLS
- Add cmfc/cmfs compatible brands except for avc3/hev1, where CMAF
requires single initialization switching set which is not supported.
- Set duration to 0 in tkhd, mdhd, mvhd.
Also updated major_brand and compatible brands:
- Set major_brand to isom (iso-bmff media file format) and made dash
a compatible brand
- Replaced compatible brand iso6 with iso8 since we use sthd for text
tracks
Fixes b/36278260
Change-Id: I3cc5dd5aa1621714d517fe02fe3841d19a1a07f6
- Also fix the misleading error if an invalid input is provided
The command line app now correctly reports that the file is not
found instead of stream not available.
Change-Id: I8cfccb62d7a50de57766666f126cf061e3df5ded
This is what webm_subsample_encryption flag actually does.
- Fixes the flag not working problem introduced by previous CLs.
- Also mark flag webm_subsample_encryption as deprecated.
Closes#220
Change-Id: I03ff843786572a91c01b8bd346a3ce50b129118f
Also added a few more command line flags for end to end test:
- no-remove_temp_files_after_test: do not remove test artifacts after
test
- encryption_key, encryption_iv: allow injecting encryption key/iv from
command line
Change-Id: I62084790e10fe6a385b90cb96d9515d8436b2a49
- The flags were overwritten in a loop and therefore only stored the
last value of the flag.
- Change the fields into arrays so that the flags are not overwritten.
Change-Id: I59762d7c84bc3d81bf3b0b5e85ffe689260d970a
Added a flag --strip_parameter_set_nalus. When enabled, parameter
set NAL units, SPS/PPS for H264 and SPS/PPS/VPS for H265, are stripped
from frames when converting NAL byte stream (AnnexB stream) to NAL
unit stream, which generates avc1/hvc1; otherwise they are not
stripped, and avc3/hev1 is generated.
Parameter set NAL units should not be stripped if they are varying
in the frames otherwise the frames may fail to be decoded.
The flag is enabled by default as we don't usually see varying
SPS/PPS/VPS and it is more space efficient with them stripped.
Set --strip_parameter_set_nalus=false to disable the flag if there
are varying SPS/PPS/VPS in the frames. This addresses #206.
Change-Id: I34bde6f33069f9f77d51a510b39f58a0f0e141aa
The issue could lead to the MPD attribute mediaPresentationDuration being
wrongly generated for WebM streams with a duration longer than INT32_MAX.
The root-cause was that StreamInfo::set_duration() accepted an int instead of a
uint64_t. This seems like a pure typo, since StreamInfo already uses a uint64_t
internally for representing duration.
This CL also removes EncryptionConfig stream data type and merges it
into StreamInfo/SegmentInfo instead.
Change-Id: Idb70ce503e61d3c951225cc78b6b15c084e16dcd
- Disable subsample encryption for VP8 in ISO-BMFF
- Apply block alignment to all subsamples for VP9 in ISO-BMFF,
instead of just superframes.
Change-Id: I8dd31cc16e87abc4d538330eaff9acb0509497df
- luma_weight_l0_flag, luma_weight_l1_flag,
chroma_weight_l0_flag, chroma_weight_l1_flag were there but not set.
- The user should use the values in pred_weight_table_l0 and
pred_weight_table_l1 instead which are set.
Change-Id: Ic9c44fb113717346938a339faf074daa32d4c2d2
Also moved MediaHandler output validation to Initialize instead.
This CL also addresses #122 with consistent chunking.
Change-Id: I60c0da6d1b33421d7828bcb827d18899e71884ce
- WebVttMediaParser uses WebVttSampleConverter to generate non
overlapping media samples.
- The media samples contains ISO BMFF boxes.
- Add kCodecWebVtt to signal that the media is webvtt and
the samples will be in ISO BMFF boxes.
Change-Id: I639902cdba7b04af75428bc20622e26b8203cfb2
Before this, HLS output did not contain language information.
Now, media playlists are properly tagged with a language in the
master playlist.
b/36134267
Change-Id: I172e946dbedd096a44cb2f917b007cc004756228
- Also sets up the packaging and verify it works.
Some of the changes are temporary to get the integration going.
Change-Id: I0cf6c379d185e157808acabb9ef58ff93d4a39ae
The spec actually requires all NAL units to be escaped, so there
is no need to escape it again.
NAL byte stream is one demarcation method; NAL unit stream is another
demarcation method. Regardless of the demarcation method used, the
requirement for NAL unit is the same. See the last paragraph of
7.4.1 NAL unit semantics on the requirement on emulation prevention bytes.
Change-Id: Icc63fcc5cf965632e331f5af5f673164c7c1663a
CENCv3 recommends only encrypting video data in slice NALs. Slice
data partition NALs should not be encrypted.
In the code, differentiate is_vcl and is_video_slice. They are the
same for H265; for H264, vcl NALs include slice data partition NALs
but video_slice NALs do not.
Change-Id: I91f4bdd76d25f0eac50e39aed350ebce3f667121
- Logic for splitting up WebVTT cues into MP4 samples.
- For any cue intervals that overlap, a new sample must be created.
Change-Id: Icf7478f42d8c5790bf6f404d512c1251dd34c405
This handler is a multi-in multi-out handler. If more than one input is
provided, there should be one and only one video stream; also, all inputs
should come from the same thread and are synchronized.
There can be multiple chunking handler running in different threads or even
different processes, we use the "consistent chunking algorithm" to make sure
the chunks in different streams are aligned without explicit communcating
with each other - which is not efficient and often difficult.
Consistent Chunking Algorithm:
1. Find the consistent chunkable boundary
Let the timestamps for video frames be (t1, t2, t3, ...). Then a
consistent chunkable boundary is simply the first chunkable boundary after
(tk / N) != (tk-1 / N), where '/' denotes integer division, and N is the
intended chunk duration.
2. Chunk only at the consistent chunkable boundary
This algorithm will make sure the chunks from different video streams are
aligned if they have aligned GoPs. However, this algorithm will only work
for video streams. To be able to chunk non video streams at similar
positions as video streams, ChunkingHandler is designed to accept one video
input and multiple non video inputs, the non video inputs are chunked when
the video input is chunked. If the inputs are synchronized - which is true
if the inputs come from the same demuxer, the video and non video chunks
are aligned.
Change-Id: Id3bad51ab14f311efdb8713b6cd36d36cf9e4639
- Deprecated command line flags --profile and --single_segment.
'segment_template' in stream descriptors implies live profile
and non-single segment.
- Added flag --generate_static_mpd_for_live_profile to generate
static mpd for live profile; if not set, dynamic mpd will be
generated.
Close#142
Change-Id: I78879297ed118f0f246c4753a16ad125bd6b5e4f
- Added two new fields in MpdOptions: dash_profile and mpd_type
- Updated MpdBuilder to support LiveProfile with static mpd
- Command line arguments will be updated in the next CL
Issue #142
Change-Id: Ibd35e5c9e1b1ef98043392e3f04a0af4700135c1
Aaron Vaage
KongQun Yang
Haoming Chen
KongQun Yang
Haoming Chen
Kamesh Devarakonda
l-law
Ivan L. Isaev
David Cavar
Yohann Connell
Rintaro Kuroiwa
Zajcev Evgeny
sylt
Joey Parrish
Chun-da Chen